[−][src]Struct stm32f3xx_hal_v2::gpio::gpioa::PA14
Pin
Implementations
impl<MODE> PA14<MODE>
[src]
pub fn into_af0(self, moder: &mut MODER, afr: &mut AFRH) -> PA14<AF0>
[src]
Configures the pin to serve as a specific alternate function
pub fn into_af3(self, moder: &mut MODER, afr: &mut AFRH) -> PA14<AF3>
[src]
Configures the pin to serve as a specific alternate function
pub fn into_af4(self, moder: &mut MODER, afr: &mut AFRH) -> PA14<AF4>
[src]
Configures the pin to serve as a specific alternate function
pub fn into_af5(self, moder: &mut MODER, afr: &mut AFRH) -> PA14<AF5>
[src]
Configures the pin to serve as a specific alternate function
pub fn into_af6(self, moder: &mut MODER, afr: &mut AFRH) -> PA14<AF6>
[src]
Configures the pin to serve as a specific alternate function
pub fn into_af7(self, moder: &mut MODER, afr: &mut AFRH) -> PA14<AF7>
[src]
Configures the pin to serve as a specific alternate function
pub fn into_af15(self, moder: &mut MODER, afr: &mut AFRH) -> PA14<AF15>
[src]
Configures the pin to serve as a specific alternate function
pub fn into_floating_input(
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA14<Input<Floating>>
[src]
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA14<Input<Floating>>
Configures the pin to operate as a floating input pin
pub fn into_pull_down_input(
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA14<Input<PullDown>>
[src]
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA14<Input<PullDown>>
Configures the pin to operate as a pulled down input pin
pub fn into_pull_up_input(
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA14<Input<PullUp>>
[src]
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA14<Input<PullUp>>
Configures the pin to operate as a pulled up input pin
pub fn into_open_drain_output(
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PA14<Output<OpenDrain>>
[src]
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PA14<Output<OpenDrain>>
Configures the pin to operate as an open drain output pin
pub fn into_push_pull_output(
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PA14<Output<PushPull>>
[src]
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PA14<Output<PushPull>>
Configures the pin to operate as an push pull output pin
pub fn into_analog(self, moder: &mut MODER, pupdr: &mut PUPDR) -> PA14<Analog>
[src]
Configures the pin to operate as analog, with disabled schmitt trigger. This mode is suitable when the pin is connected to the DAC or ADC.
impl PA14<Output<OpenDrain>>
[src]
pub fn internal_pull_up(&mut self, pupdr: &mut PUPDR, on: bool)
[src]
Enables / disables the internal pull up
impl<MODE> PA14<Output<MODE>>
[src]
pub fn downgrade(self) -> PAx<Output<MODE>>
[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
impl<MODE> PA14<Input<MODE>>
[src]
pub fn downgrade(self) -> PAx<Input<MODE>>
[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
Trait Implementations
impl<MODE> Default for PA14<Output<MODE>>
[src]
impl<MODE> InputPin for PA14<Input<MODE>>
[src]
type Error = Infallible
Error type
fn is_high(&self) -> Result<bool, Self::Error>
[src]
fn is_low(&self) -> Result<bool, Self::Error>
[src]
impl InputPin for PA14<Output<OpenDrain>>
[src]
type Error = Infallible
Error type
fn is_high(&self) -> Result<bool, Self::Error>
[src]
fn is_low(&self) -> Result<bool, Self::Error>
[src]
impl<MODE> OutputPin for PA14<Output<MODE>>
[src]
type Error = Infallible
Error type
fn set_high(&mut self) -> Result<(), Self::Error>
[src]
fn set_low(&mut self) -> Result<(), Self::Error>
[src]
impl<MODE> StatefulOutputPin for PA14<Output<MODE>>
[src]
fn is_set_high(&self) -> Result<bool, Self::Error>
[src]
fn is_set_low(&self) -> Result<bool, Self::Error>
[src]
impl TxPin<USART2> for PA14<AF7>
[src]
Auto Trait Implementations
impl<MODE> Send for PA14<MODE> where
MODE: Send,
MODE: Send,
impl<MODE> Sync for PA14<MODE> where
MODE: Sync,
MODE: Sync,
impl<MODE> Unpin for PA14<MODE> where
MODE: Unpin,
MODE: Unpin,
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Default for T where
T: Default,
[src]
T: Default,
impl<T> From<T> for T
[src]
impl<T> InputPin for T where
T: InputPin,
[src]
T: InputPin,
type Error = ()
Error type
pub fn is_low(&self) -> Result<bool, <T as InputPin>::Error>
[src]
pub fn is_high(&self) -> Result<bool, <T as InputPin>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> OutputPin for T where
T: OutputPin,
[src]
T: OutputPin,
type Error = ()
Error type
pub fn set_low(&mut self) -> Result<(), <T as OutputPin>::Error>
[src]
pub fn set_high(&mut self) -> Result<(), <T as OutputPin>::Error>
[src]
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<T> StatefulOutputPin for T where
T: StatefulOutputPin + OutputPin,
[src]
T: StatefulOutputPin + OutputPin,
pub fn is_set_low(&self) -> Result<bool, <T as OutputPin>::Error>
[src]
pub fn is_set_high(&self) -> Result<bool, <T as OutputPin>::Error>
[src]
impl<P> ToggleableOutputPin for P where
P: Default,
[src]
P: Default,
type Error = <P as OutputPin>::Error
Error type
pub fn toggle(&mut self) -> Result<(), <P as ToggleableOutputPin>::Error>
[src]
Toggle pin output
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,