[−][src]Struct stm32f3::stm32f373::i2c1::cr1::R
Value read from the register
Methods
impl R
[src]
impl R
pub fn bits(&self) -> u32 | [src] |
Value of the register as raw bits
pub fn pe(&self) -> PER | [src] |
Bit 0 - Peripheral enable
pub fn txie(&self) -> TXIER | [src] |
Bit 1 - TX Interrupt enable
pub fn rxie(&self) -> RXIER | [src] |
Bit 2 - RX Interrupt enable
pub fn addrie(&self) -> ADDRIER | [src] |
Bit 3 - Address match interrupt enable (slave only)
pub fn nackie(&self) -> NACKIER | [src] |
Bit 4 - Not acknowledge received interrupt enable
pub fn stopie(&self) -> STOPIER | [src] |
Bit 5 - STOP detection Interrupt enable
pub fn tcie(&self) -> TCIER | [src] |
Bit 6 - Transfer Complete interrupt enable
pub fn errie(&self) -> ERRIER | [src] |
Bit 7 - Error interrupts enable
pub fn dnf(&self) -> DNFR | [src] |
Bits 8:11 - Digital noise filter
pub fn anfoff(&self) -> ANFOFFR | [src] |
Bit 12 - Analog noise filter OFF
pub fn txdmaen(&self) -> TXDMAENR | [src] |
Bit 14 - DMA transmission requests enable
pub fn rxdmaen(&self) -> RXDMAENR | [src] |
Bit 15 - DMA reception requests enable
pub fn sbc(&self) -> SBCR | [src] |
Bit 16 - Slave byte control
pub fn nostretch(&self) -> NOSTRETCHR | [src] |
Bit 17 - Clock stretching disable
pub fn wupen(&self) -> WUPENR | [src] |
Bit 18 - Wakeup from STOP enable
pub fn gcen(&self) -> GCENR | [src] |
Bit 19 - General call enable
pub fn smbhen(&self) -> SMBHENR | [src] |
Bit 20 - SMBus Host address enable
pub fn smbden(&self) -> SMBDENR | [src] |
Bit 21 - SMBus Device Default address enable
pub fn alerten(&self) -> ALERTENR | [src] |
Bit 22 - SMBUS alert enable
pub fn pecen(&self) -> PECENR | [src] |
Bit 23 - PEC enable
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error> | [src] |
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error> | [src] |
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T | [src] |
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId | [src] |