[−][src]Struct stm32f3::stm32f303::rtc::cr::W
Value to write to the register
Methods
impl W
[src]
impl W
pub fn reset_value() -> W | [src] |
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self | [src] |
Writes raw bits to the register
pub fn wcksel(&mut self) -> _WCKSELW | [src] |
Bits 0:2 - Wakeup clock selection
pub fn tsedge(&mut self) -> _TSEDGEW | [src] |
Bit 3 - Time-stamp event active edge
pub fn refckon(&mut self) -> _REFCKONW | [src] |
Bit 4 - Reference clock detection enable (50 or 60 Hz)
pub fn bypshad(&mut self) -> _BYPSHADW | [src] |
Bit 5 - Bypass the shadow registers
pub fn fmt(&mut self) -> _FMTW | [src] |
Bit 6 - Hour format
pub fn alrae(&mut self) -> _ALRAEW | [src] |
Bit 8 - Alarm A enable
pub fn alrbe(&mut self) -> _ALRBEW | [src] |
Bit 9 - Alarm B enable
pub fn wute(&mut self) -> _WUTEW | [src] |
Bit 10 - Wakeup timer enable
pub fn tse(&mut self) -> _TSEW | [src] |
Bit 11 - Time stamp enable
pub fn alraie(&mut self) -> _ALRAIEW | [src] |
Bit 12 - Alarm A interrupt enable
pub fn alrbie(&mut self) -> _ALRBIEW | [src] |
Bit 13 - Alarm B interrupt enable
pub fn wutie(&mut self) -> _WUTIEW | [src] |
Bit 14 - Wakeup timer interrupt enable
pub fn tsie(&mut self) -> _TSIEW | [src] |
Bit 15 - Time-stamp interrupt enable
pub fn add1h(&mut self) -> _ADD1HW | [src] |
Bit 16 - Add 1 hour (summer time change)
pub fn sub1h(&mut self) -> _SUB1HW | [src] |
Bit 17 - Subtract 1 hour (winter time change)
pub fn bkp(&mut self) -> _BKPW | [src] |
Bit 18 - Backup
pub fn cosel(&mut self) -> _COSELW | [src] |
Bit 19 - Calibration output selection
pub fn pol(&mut self) -> _POLW | [src] |
Bit 20 - Output polarity
pub fn osel(&mut self) -> _OSELW | [src] |
Bits 21:22 - Output selection
pub fn coe(&mut self) -> _COEW | [src] |
Bit 23 - Calibration output enable
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error> | [src] |
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error> | [src] |
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T | [src] |
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId | [src] |