[−][src]Struct stm32f3::stm32f303::rcc::ahbenr::W
Value to write to the register
Methods
impl W
[src]
impl W
pub fn reset_value() -> W | [src] |
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self | [src] |
Writes raw bits to the register
pub fn dmaen(&mut self) -> _DMAENW | [src] |
Bit 0 - DMA1 clock enable
pub fn dma2en(&mut self) -> _DMA2ENW | [src] |
Bit 1 - DMA2 clock enable
pub fn sramen(&mut self) -> _SRAMENW | [src] |
Bit 2 - SRAM interface clock enable
pub fn flitfen(&mut self) -> _FLITFENW | [src] |
Bit 4 - FLITF clock enable
pub fn fmcen(&mut self) -> _FMCENW | [src] |
Bit 5 - FMC clock enable
pub fn crcen(&mut self) -> _CRCENW | [src] |
Bit 6 - CRC clock enable
pub fn iophen(&mut self) -> _IOPHENW | [src] |
Bit 16 - IO port H clock enable
pub fn iopaen(&mut self) -> _IOPAENW | [src] |
Bit 17 - I/O port A clock enable
pub fn iopben(&mut self) -> _IOPBENW | [src] |
Bit 18 - I/O port B clock enable
pub fn iopcen(&mut self) -> _IOPCENW | [src] |
Bit 19 - I/O port C clock enable
pub fn iopden(&mut self) -> _IOPDENW | [src] |
Bit 20 - I/O port D clock enable
pub fn iopeen(&mut self) -> _IOPEENW | [src] |
Bit 21 - I/O port E clock enable
pub fn iopfen(&mut self) -> _IOPFENW | [src] |
Bit 22 - I/O port F clock enable
pub fn iopgen(&mut self) -> _IOPGENW | [src] |
Bit 23 - I/O port G clock enable
pub fn tscen(&mut self) -> _TSCENW | [src] |
Bit 24 - Touch sensing controller clock enable
pub fn adc12en(&mut self) -> _ADC12ENW | [src] |
Bit 28 - ADC1 and ADC2 clock enable
pub fn adc34en(&mut self) -> _ADC34ENW | [src] |
Bit 29 - ADC3 and ADC4 clock enable
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
🔬 This is a nightly-only experimental API. (
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error> | [src] |
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
🔬 This is a nightly-only experimental API. (
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error> | [src] |
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T | [src] |
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId | [src] |