# Change Log
All notable changes to this project will be documented in this file.
The format is based on [Keep a Changelog](http://keepachangelog.com/)
and this project adheres to [Semantic Versioning](http://semver.org/).
## [Unreleased]
## [v0.6.1] - 2020-06-25
### Added
- Add runtime-reconfigurable GPIO pins
### Fixed
- Fix wrong frequency reported by `MonoTimer`
- Fix wrong timings generated by `Timer::syst`
- Fix period retrieval for timers
### Changed
- Use `Deref` for I2C generic implementations instead of macros
- Deprecate `Spi::free` and rename it to `Spi::release`
- Improve `SPI` documentation
- Improve `RCC` and `AFIO` register documentation
## [v0.6.0] - 2020-06-06
### Breaking changes
- Bump `stm32f1` dependency (`0.11.0`)
- Make traits `rcc::Enable` and `rcc::Reset` public, but `RccBus` sealed
### Added
- Extend the Pwm implementation to cover the full embedded_hal::Pwm API
- Add `QeiOptions` struct to configure slave mode and auto reload value of QEI interface
- Implement multiplication and division for frequency wrappers (#193)
- Add support for CRC
### Changed
- Support for connectivity line devices: `stm32f105xx` and `stm32f107xx`
- Consistently use PAC as `pac` and mark `device` and `stm32` informally as deprecated
- Replace default blocking spi Write implementation with an optimized one
- Use `Deref` for SPI generic implementations instead of macros
### Fixed
- Fix PWM on `TIM1`
- Fix ADC race condition causing incorrect reads at certain frequencies
## [v0.5.3] - 2020-01-20
- Add `InputPin` impl for generic open drain outputs
- Implement `Read<u8>` / `Write<u8>` for `Serial` (#171)
- Fix docs.rs build
## [v0.5.2] - 2019-12-15
- Fix USB module docs
## [v0.5.1] - 2019-12-14
### Added
- Added support for `ExtiPin` pin traits
### Fixed
- Fix SPI2 and 3 using the wrong frequency
- Fix some problems with I2C reads anad writes
## [v0.5.0] - 2019-12-03
### Added
- Added `Mode` marker trait for `gpio` pins that correspondent to pin mode.
- RCC `Bus` trait + private `Enable` and `Reset` traits
- Added `micros_since` and `reset` methods to timer
- Added `select_frequency` method to RTC
- Unidirectional DMA support for SPI (TX only)
- Added USB driver for `stm32f102` and `stm32f103` devices
- Added all timers for all variants as described by CubeMX. Commented out {TIM9, TIM10} for XL and {TIM12, TIM13, TIM14} for XL and F100-HIGH due to missing fields for those devices in stm32-rs.
- ADC measurement now can be run by timer
### Breaking changes
- Implement more pin combinations for PWM configuration, added PWM for TIM1 (API for custom PWM pins was removed as it's no more needed)
- Bump `stm32f1` dependency (`0.9.0`)
- `void::Void` replaced with `Infallible` where it is possible
- Change timer/pwm init API
- Remove `set_low` and `set_high` for pins in Alternate output mode
- Renames `set_seconds` and `seconds` methods on RTC to `set_time` and `current_time`, respectively
- Starting the timer does not generate interrupt requests anymore
- Make MAPR::mapr() private
- i2c mode now takes Hertz instead of a generic u32
- Timers that were previously incorrectly available without medium/high/xl density features may now be missing
### Fixed
- Fix some F1 variants crashing when modifying MAPR if JTAG is disabled
- Switched Timer stop_in_debug to modify cr instead of writing it to prevent it clobbering the rest of the register (was breaking ITM output when configuring pwm_input for example)
### Changed
- Pins can be passed in any order to SPI constructor,
`NoSck`, `NoMiso` and `NoMosi` can be also passed instead of real pin
- DMA traits now require AsSlice instead of AsRef
- GPIO `downgrade` function now returns a `Pxx` instead of a type specific to a
GPIO port
- AdcDma can process several pins at a time
## [v0.4.0] - 2019-08-09
### Added
- Added DMA support for ADC1.
- Added type aliases `Tx1` for `Tx<USART1>`, `RxDma1` for `RxDma<USART1, dma1::C5>`, etc.
- Add ADC1 reading functions for channels 16 (temperature) and 17 (internal reference voltage)
- Update existing ADC example according to ADC API changes
- Add new ADC example to read ambient temperature using ADC1 CH16
- Add `listen` and `unlisten` to `serial::Tx` and `serial::Rx`.
- Add methods `read_data_register` and `write_data_register` to
`backup_domain::BackupDomain`, which allow read and write access to the Backup
Data Register.
### Breaking changes
- Replace gpio traits with digital::v2
- Bump `stm32f1` dependency (`0.8.0`)
- ADC now requires the clock configuration for initialisation
- `disable_jtag` now transforms PA15, PB3 and PB4 to forbid their use without deactivating JTAG
### Changed
- Fix hclk miscalculation
## [v0.3.0] - 2019-04-27
### Added
- Added device-selected meta feature flag
- Restore and improve Serial DMA-based TX, RX and circular implementation
- Implement ADC example
- Implement ADC embedded_hal traits
- Implement ADC clock configuration
- Add feature for using STM32F101 chip
- Add gpio pins corresponding to LQFP-100 package
- Implement `core::fmt::Write` for `serial::Tx`
- Add methods `stop`, `release` and `clear_update_interrupt_flag` to `Timer` (`clear_update_interrupt_flag` does not apply to `Timer<SYST>`)
- Add timer interrupt example using RTFM
- Implement IndependentWatchdog for the IWDG peripheral
- Remove all PWM channel configurations except 'all the channels for default remapping' configurations
- Update PWM documentation: clarify custom selection of channels
- Add PWM example for custom selection of channels
### Changed
- *Breaking change* Add additional configuration options to USART.
- Baud rate now has to be set using configuration struct
- Now requires stm32f1 v0.7 (breaking change)
- enable PWM on stm32f100
- Fix gpio misconfiguration when using a timer in pwm input mode. Now the gpio has to be configured in floating input mode.
## [v0.2.1] - 2019-03-08
### Added
- Add basic backup domain support
- Add support for real time clock
- Add patches for using STM32F100 chip (PWM disabled)
### Changed
- Improve documentation
### Fixed
- Use correct clock for serial baudrate computation
## [v0.2.0] - 2019-02-10
### Added
- Add support for setting initial pin state
- Added ChangeLog
### Changed
- Add information about device features to readme
- Allow read-/write-only transactions in write_read
- Bumped dependency versions (breaking change)
### Fixed
- Fix link to docs.rs
## [v0.1.1] - 2018-12-17
### Added
- First tagged version
[Unreleased]: https://github.com/stm32-rs/stm32f1xx-hal/compare/v0.6.1...HEAD
[v0.6.0]: https://github.com/stm32-rs/stm32f1xx-hal/compare/v0.6.0...v0.6.1
[v0.6.0]: https://github.com/stm32-rs/stm32f1xx-hal/compare/v0.5.3...v0.6.0
[v0.5.3]: https://github.com/stm32-rs/stm32f1xx-hal/compare/v0.5.2...v0.5.3
[v0.5.2]: https://github.com/stm32-rs/stm32f1xx-hal/compare/v0.5.1...v0.5.2
[v0.5.1]: https://github.com/stm32-rs/stm32f1xx-hal/compare/v0.5.0...v0.5.1
[v0.5.0]: https://github.com/stm32-rs/stm32f1xx-hal/compare/v0.4.0...v0.5.0
[v0.4.0]: https://github.com/stm32-rs/stm32f1xx-hal/compare/v0.3.0...v0.4.0
[v0.3.0]: https://github.com/stm32-rs/stm32f1xx-hal/compare/v0.2.1...v0.3.0
[v0.2.1]: https://github.com/stm32-rs/stm32f1xx-hal/compare/v0.2.0...v0.2.1
[v0.2.0]: https://github.com/stm32-rs/stm32f1xx-hal/compare/v0.1.1...v0.2.0
