Struct stm32f0x2::usart1::isr::R
[−]
[src]
pub struct R { /* fields omitted */ }Value read from the register
Methods
impl R[src]
fn bits(&self) -> u32[src]
Value of the register as raw bits
fn reack(&self) -> REACKR[src]
Bit 22 - Receive enable acknowledge flag
fn teack(&self) -> TEACKR[src]
Bit 21 - Transmit enable acknowledge flag
fn wuf(&self) -> WUFR[src]
Bit 20 - Wakeup from Stop mode flag
fn rwu(&self) -> RWUR[src]
Bit 19 - Receiver wakeup from Mute mode
fn sbkf(&self) -> SBKFR[src]
Bit 18 - Send break flag
fn cmf(&self) -> CMFR[src]
Bit 17 - character match flag
fn busy(&self) -> BUSYR[src]
Bit 16 - Busy flag
fn abrf(&self) -> ABRFR[src]
Bit 15 - Auto baud rate flag
fn abre(&self) -> ABRER[src]
Bit 14 - Auto baud rate error
fn eobf(&self) -> EOBFR[src]
Bit 12 - End of block flag
fn rtof(&self) -> RTOFR[src]
Bit 11 - Receiver timeout
fn cts(&self) -> CTSR[src]
Bit 10 - CTS flag
fn ctsif(&self) -> CTSIFR[src]
Bit 9 - CTS interrupt flag
fn lbdf(&self) -> LBDFR[src]
Bit 8 - LIN break detection flag
fn txe(&self) -> TXER[src]
Bit 7 - Transmit data register empty
fn tc(&self) -> TCR[src]
Bit 6 - Transmission complete
fn rxne(&self) -> RXNER[src]
Bit 5 - Read data register not empty
fn idle(&self) -> IDLER[src]
Bit 4 - Idle line detected
fn ore(&self) -> ORER[src]
Bit 3 - Overrun error
fn nf(&self) -> NFR[src]
Bit 2 - Noise detected flag
fn fe(&self) -> FER[src]
Bit 1 - Framing error
fn pe(&self) -> PER[src]
Bit 0 - Parity error