Struct socketcan_isotp::IsoTpBehaviour

pub struct IsoTpBehaviour { /* fields omitted */ }

Methods

impl IsoTpBehaviour

pub const CAN_ISOTP_LISTEN_MODE: IsoTpBehaviour

listen only (do not send FC)

pub const CAN_ISOTP_EXTEND_ADDR: IsoTpBehaviour

enable extended addressing

pub const CAN_ISOTP_TX_PADDING: IsoTpBehaviour

enable CAN frame padding tx path

pub const CAN_ISOTP_RX_PADDING: IsoTpBehaviour

enable CAN frame padding rx path

pub const CAN_ISOTP_CHK_PAD_LEN: IsoTpBehaviour

check received CAN frame padding

pub const CAN_ISOTP_CHK_PAD_DATA: IsoTpBehaviour

check received CAN frame padding

pub const CAN_ISOTP_HALF_DUPLEX: IsoTpBehaviour

half duplex error state handling

pub const CAN_ISOTP_FORCE_TXSTMIN: IsoTpBehaviour

ignore stmin from received FC

pub const CAN_ISOTP_FORCE_RXSTMIN: IsoTpBehaviour

ignore CFs depending on rx stmin

pub const CAN_ISOTP_RX_EXT_ADDR: IsoTpBehaviour

different rx extended addressing

pub const fn empty() -> IsoTpBehaviour

Returns an empty set of flags

pub const fn all() -> IsoTpBehaviour

Returns the set containing all flags.

pub const fn bits(&self) -> u32

Returns the raw value of the flags currently stored.

pub fn from_bits(bits: u32) -> Option<IsoTpBehaviour>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: u32) -> IsoTpBehaviour

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: u32) -> IsoTpBehaviour

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: IsoTpBehaviour) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: IsoTpBehaviour) -> bool

Returns true all of the flags in other are contained within self.

pub fn insert(&mut self, other: IsoTpBehaviour)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: IsoTpBehaviour)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: IsoTpBehaviour)

Toggles the specified flags in-place.

pub fn set(&mut self, other: IsoTpBehaviour, value: bool)

Inserts or removes the specified flags depending on the passed value.

Trait Implementations

impl Extend<IsoTpBehaviour> for IsoTpBehaviour

fn extend<T: IntoIterator<Item = IsoTpBehaviour>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

impl Clone for IsoTpBehaviour

fn clone(&self) -> IsoTpBehaviour

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for IsoTpBehaviour

impl Eq for IsoTpBehaviour

impl Ord for IsoTpBehaviour

fn cmp(&self, other: &IsoTpBehaviour) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

🔬 This is a nightly-only experimental API. (clamp)

Restrict a value to a certain interval.

impl PartialEq<IsoTpBehaviour> for IsoTpBehaviour

fn eq(&self, other: &IsoTpBehaviour) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &IsoTpBehaviour) -> bool

This method tests for !=.

impl PartialOrd<IsoTpBehaviour> for IsoTpBehaviour

fn partial_cmp(&self, other: &IsoTpBehaviour) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &IsoTpBehaviour) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &IsoTpBehaviour) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &IsoTpBehaviour) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &IsoTpBehaviour) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Debug for IsoTpBehaviour

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Sub<IsoTpBehaviour> for IsoTpBehaviour

type Output = IsoTpBehaviour

The resulting type after applying the - operator.

fn sub(self, other: IsoTpBehaviour) -> IsoTpBehaviour

Returns the set difference of the two sets of flags.

impl SubAssign<IsoTpBehaviour> for IsoTpBehaviour

fn sub_assign(&mut self, other: IsoTpBehaviour)

Disables all flags enabled in the set.

impl Not for IsoTpBehaviour

type Output = IsoTpBehaviour

The resulting type after applying the ! operator.

fn not(self) -> IsoTpBehaviour

Returns the complement of this set of flags.

impl BitAnd<IsoTpBehaviour> for IsoTpBehaviour

type Output = IsoTpBehaviour

The resulting type after applying the & operator.

fn bitand(self, other: IsoTpBehaviour) -> IsoTpBehaviour

Returns the intersection between the two sets of flags.

impl BitOr<IsoTpBehaviour> for IsoTpBehaviour

type Output = IsoTpBehaviour

The resulting type after applying the | operator.

fn bitor(self, other: IsoTpBehaviour) -> IsoTpBehaviour

Returns the union of the two sets of flags.

impl BitXor<IsoTpBehaviour> for IsoTpBehaviour

type Output = IsoTpBehaviour

The resulting type after applying the ^ operator.

fn bitxor(self, other: IsoTpBehaviour) -> IsoTpBehaviour

Returns the left flags, but with all the right flags toggled.

impl BitAndAssign<IsoTpBehaviour> for IsoTpBehaviour

fn bitand_assign(&mut self, other: IsoTpBehaviour)

Disables all flags disabled in the set.

impl BitOrAssign<IsoTpBehaviour> for IsoTpBehaviour

fn bitor_assign(&mut self, other: IsoTpBehaviour)

Adds the set of flags.

impl BitXorAssign<IsoTpBehaviour> for IsoTpBehaviour

fn bitxor_assign(&mut self, other: IsoTpBehaviour)

Toggles the set of flags.

impl Hash for IsoTpBehaviour

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl StructuralPartialEq for IsoTpBehaviour

impl StructuralEq for IsoTpBehaviour

impl FromIterator<IsoTpBehaviour> for IsoTpBehaviour

fn from_iter<T: IntoIterator<Item = IsoTpBehaviour>>(
    iterator: T
) -> IsoTpBehaviour

Creates a value from an iterator.

impl Octal for IsoTpBehaviour

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Binary for IsoTpBehaviour

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl LowerHex for IsoTpBehaviour

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl UpperHex for IsoTpBehaviour

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.