[−]Struct shakmaty::PositionError
Methods
impl PositionError
pub const EMPTY_BOARD: PositionError
pub const MISSING_KING: PositionError
pub const TOO_MANY_KINGS: PositionError
pub const PAWNS_ON_BACKRANK: PositionError
pub const BAD_CASTLING_RIGHTS: PositionError
pub const INVALID_EP_SQUARE: PositionError
pub const OPPOSITE_CHECK: PositionError
pub const VARIANT: PositionError
pub const fn empty() -> PositionError
Returns an empty set of flags
pub const fn all() -> PositionError
Returns the set containing all flags.
pub const fn bits(&self) -> u32
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: u32) -> Option<PositionError>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub const fn from_bits_truncate(bits: u32) -> PositionError
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub const fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub const fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub const fn intersects(&self, other: PositionError) -> bool
Returns true
if there are flags common to both self
and other
.
pub const fn contains(&self, other: PositionError) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: PositionError)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: PositionError)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: PositionError)
Toggles the specified flags in-place.
pub fn set(&mut self, other: PositionError, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Clone for PositionError
fn clone(&self) -> PositionError
fn clone_from(&mut self, source: &Self)
1.0.0[src]
Performs copy-assignment from source
. Read more
impl Ord for PositionError
fn cmp(&self, other: &PositionError) -> Ordering
fn max(self, other: Self) -> Self
1.21.0[src]
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self
1.21.0[src]
Compares and returns the minimum of two values. Read more
fn clamp(self, min: Self, max: Self) -> Self
[src]
clamp
)Restrict a value to a certain interval. Read more
impl Extend<PositionError> for PositionError
fn extend<T: IntoIterator<Item = PositionError>>(&mut self, iterator: T)
impl PartialOrd<PositionError> for PositionError
fn partial_cmp(&self, other: &PositionError) -> Option<Ordering>
fn lt(&self, other: &PositionError) -> bool
fn le(&self, other: &PositionError) -> bool
fn gt(&self, other: &PositionError) -> bool
fn ge(&self, other: &PositionError) -> bool
impl Copy for PositionError
impl Eq for PositionError
impl PartialEq<PositionError> for PositionError
fn eq(&self, other: &PositionError) -> bool
fn ne(&self, other: &PositionError) -> bool
impl Hash for PositionError
fn hash<__H: Hasher>(&self, state: &mut __H)
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl Sub<PositionError> for PositionError
type Output = PositionError
The resulting type after applying the -
operator.
fn sub(self, other: PositionError) -> PositionError
Returns the set difference of the two sets of flags.
impl SubAssign<PositionError> for PositionError
fn sub_assign(&mut self, other: PositionError)
Disables all flags enabled in the set.
impl Not for PositionError
type Output = PositionError
The resulting type after applying the !
operator.
fn not(self) -> PositionError
Returns the complement of this set of flags.
impl BitAnd<PositionError> for PositionError
type Output = PositionError
The resulting type after applying the &
operator.
fn bitand(self, other: PositionError) -> PositionError
Returns the intersection between the two sets of flags.
impl BitOr<PositionError> for PositionError
type Output = PositionError
The resulting type after applying the |
operator.
fn bitor(self, other: PositionError) -> PositionError
Returns the union of the two sets of flags.
impl BitXor<PositionError> for PositionError
type Output = PositionError
The resulting type after applying the ^
operator.
fn bitxor(self, other: PositionError) -> PositionError
Returns the left flags, but with all the right flags toggled.
impl BitAndAssign<PositionError> for PositionError
fn bitand_assign(&mut self, other: PositionError)
Disables all flags disabled in the set.
impl BitOrAssign<PositionError> for PositionError
fn bitor_assign(&mut self, other: PositionError)
Adds the set of flags.
impl BitXorAssign<PositionError> for PositionError
fn bitxor_assign(&mut self, other: PositionError)
Toggles the set of flags.
impl Display for PositionError
[src]
impl Debug for PositionError
impl FromIterator<PositionError> for PositionError
fn from_iter<T: IntoIterator<Item = PositionError>>(
iterator: T
) -> PositionError
iterator: T
) -> PositionError
impl Octal for PositionError
impl Binary for PositionError
impl LowerHex for PositionError
impl UpperHex for PositionError
impl Error for PositionError
[src]
fn description(&self) -> &str
[src]
fn cause(&self) -> Option<&dyn Error>
1.0.0[src]
replaced by Error::source, which can support downcasting
The lower-level cause of this error, if any. Read more
fn source(&self) -> Option<&(dyn Error + 'static)>
1.30.0[src]
The lower-level source of this error, if any. Read more
Auto Trait Implementations
impl Unpin for PositionError
impl Sync for PositionError
impl Send for PositionError
impl UnwindSafe for PositionError
impl RefUnwindSafe for PositionError
Blanket Implementations
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
fn to_owned(&self) -> T
[src]
fn clone_into(&self, target: &mut T)
[src]
impl<T> ToString for T where
T: Display + ?Sized,
[src]
T: Display + ?Sized,
impl<T> From<T> for T
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,