use alloc::vec::Vec;
use core::fmt::Debug;

use pki_types::{CertificateDer, ServerName, UnixTime};

use crate::enums::SignatureScheme;
use crate::error::{Error, InvalidMessage};
use crate::msgs::base::PayloadU16;
use crate::msgs::codec::{Codec, Reader};
use crate::msgs::handshake::DistinguishedName;

// Marker types.  These are used to bind the fact some verification
// (certificate chain or handshake signature) has taken place into
// protocol states.  We use this to have the compiler check that there
// are no 'goto fail'-style elisions of important checks before we
// reach the traffic stage.
//
// These types are public, but cannot be directly constructed.  This
// means their origins can be precisely determined by looking
// for their `assertion` constructors.

/// Zero-sized marker type representing verification of a signature.
#[derive(Debug)]
pub struct HandshakeSignatureValid(());

impl HandshakeSignatureValid {
    /// Make a `HandshakeSignatureValid`
    pub fn assertion() -> Self {
        Self(())
    }
}

#[derive(Debug)]
pub(crate) struct FinishedMessageVerified(());

impl FinishedMessageVerified {
    pub(crate) fn assertion() -> Self {
        Self(())
    }
}

/// Zero-sized marker type representing verification of a server cert chain.
#[allow(unreachable_pub)]
#[derive(Debug)]
pub struct ServerCertVerified(());

#[allow(unreachable_pub)]
impl ServerCertVerified {
    /// Make a `ServerCertVerified`
    pub fn assertion() -> Self {
        Self(())
    }
}

/// Zero-sized marker type representing verification of a client cert chain.
#[derive(Debug)]
pub struct ClientCertVerified(());

impl ClientCertVerified {
    /// Make a `ClientCertVerified`
    pub fn assertion() -> Self {
        Self(())
    }
}

/// Something that can verify a server certificate chain, and verify
/// signatures made by certificates.
#[allow(unreachable_pub)]
pub trait ServerCertVerifier: Debug + Send + Sync {
    /// Verify the end-entity certificate `end_entity` is valid for the
    /// hostname `dns_name` and chains to at least one trust anchor.
    ///
    /// `intermediates` contains all certificates other than `end_entity` that
    /// were sent as part of the server's [Certificate] message. It is in the
    /// same order that the server sent them and may be empty.
    ///
    /// Note that none of the certificates have been parsed yet, so it is the responsibility of
    /// the implementor to handle invalid data. It is recommended that the implementor returns
    /// [`Error::InvalidCertificate(CertificateError::BadEncoding)`] when these cases are encountered.
    ///
    /// [Certificate]: https://datatracker.ietf.org/doc/html/rfc8446#section-4.4.2
    fn verify_server_cert(
        &self,
        end_entity: &CertificateDer<'_>,
        intermediates: &[CertificateDer<'_>],
        server_name: &ServerName<'_>,
        ocsp_response: &[u8],
        now: UnixTime,
    ) -> Result<ServerCertVerified, Error>;

    /// Verify a signature allegedly by the given server certificate.
    ///
    /// `message` is not hashed, and needs hashing during the verification.
    /// The signature and algorithm are within `dss`.  `cert` contains the
    /// public key to use.
    ///
    /// `cert` has already been validated by [`ServerCertVerifier::verify_server_cert`].
    ///
    /// If and only if the signature is valid, return `Ok(HandshakeSignatureValid)`.
    /// Otherwise, return an error -- rustls will send an alert and abort the
    /// connection.
    ///
    /// This method is only called for TLS1.2 handshakes.  Note that, in TLS1.2,
    /// SignatureSchemes such as `SignatureScheme::ECDSA_NISTP256_SHA256` are not
    /// in fact bound to the specific curve implied in their name.
    fn verify_tls12_signature(
        &self,
        message: &[u8],
        cert: &CertificateDer<'_>,
        dss: &DigitallySignedStruct,
    ) -> Result<HandshakeSignatureValid, Error>;

    /// Verify a signature allegedly by the given server certificate.
    ///
    /// This method is only called for TLS1.3 handshakes.
    ///
    /// This method is very similar to `verify_tls12_signature`: but note the
    /// tighter ECDSA SignatureScheme semantics -- e.g. `SignatureScheme::ECDSA_NISTP256_SHA256`
    /// must only validate signatures using public keys on the right curve --
    /// rustls does not enforce this requirement for you.
    ///
    /// `cert` has already been validated by [`ServerCertVerifier::verify_server_cert`].
    ///
    /// If and only if the signature is valid, return `Ok(HandshakeSignatureValid)`.
    /// Otherwise, return an error -- rustls will send an alert and abort the
    /// connection.
    fn verify_tls13_signature(
        &self,
        message: &[u8],
        cert: &CertificateDer<'_>,
        dss: &DigitallySignedStruct,
    ) -> Result<HandshakeSignatureValid, Error>;

    /// Return the list of SignatureSchemes that this verifier will handle,
    /// in `verify_tls12_signature` and `verify_tls13_signature` calls.
    ///
    /// This should be in priority order, with the most preferred first.
    fn supported_verify_schemes(&self) -> Vec<SignatureScheme>;
}

/// Something that can verify a client certificate chain
#[allow(unreachable_pub)]
pub trait ClientCertVerifier: Debug + Send + Sync {
    /// Returns `true` to enable the server to request a client certificate and
    /// `false` to skip requesting a client certificate. Defaults to `true`.
    fn offer_client_auth(&self) -> bool {
        true
    }

    /// Return `true` to require a client certificate and `false` to make
    /// client authentication optional.
    /// Defaults to `self.offer_client_auth()`.
    fn client_auth_mandatory(&self) -> bool {
        self.offer_client_auth()
    }

    /// Returns the [`DistinguishedName`] [subjects] that the server will hint to clients to
    /// identify acceptable authentication trust anchors.
    ///
    /// These hint values help the client pick a client certificate it believes the server will
    /// accept. The hints must be DER-encoded X.500 distinguished names, per [RFC 5280 A.1]. They
    /// are sent in the [`certificate_authorities`] extension of a [`CertificateRequest`] message
    /// when [ClientCertVerifier::offer_client_auth] is true. When an empty list is sent the client
    /// should always provide a client certificate if it has one.
    ///
    /// Generally this list should contain the [`DistinguishedName`] of each root trust
    /// anchor in the root cert store that the server is configured to use for authenticating
    /// presented client certificates.
    ///
    /// In some circumstances this list may be customized to include [`DistinguishedName`] entries
    /// that do not correspond to a trust anchor in the server's root cert store. For example,
    /// the server may be configured to trust a root CA that cross-signed an issuer certificate
    /// that the client considers a trust anchor. From the server's perspective the cross-signed
    /// certificate is an intermediate, and not present in the server's root cert store. The client
    /// may have the cross-signed certificate configured as a trust anchor, and be unaware of the
    /// root CA that cross-signed it. If the server's hints list only contained the subjects of the
    /// server's root store the client would consider a client certificate issued by the cross-signed
    /// issuer unacceptable, since its subject was not hinted. To avoid this circumstance the server
    /// should customize the hints list to include the subject of the cross-signed issuer in addition
    /// to the subjects from the root cert store.
    ///
    /// [subjects]: https://datatracker.ietf.org/doc/html/rfc5280#section-4.1.2.6
    /// [RFC 5280 A.1]: https://www.rfc-editor.org/rfc/rfc5280#appendix-A.1
    /// [`CertificateRequest`]: https://datatracker.ietf.org/doc/html/rfc8446#section-4.3.2
    /// [`certificate_authorities`]: https://datatracker.ietf.org/doc/html/rfc8446#section-4.2.4
    fn root_hint_subjects(&self) -> &[DistinguishedName];

    /// Verify the end-entity certificate `end_entity` is valid, acceptable,
    /// and chains to at least one of the trust anchors trusted by
    /// this verifier.
    ///
    /// `intermediates` contains the intermediate certificates the
    /// client sent along with the end-entity certificate; it is in the same
    /// order that the peer sent them and may be empty.
    ///
    /// Note that none of the certificates have been parsed yet, so it is the responsibility of
    /// the implementor to handle invalid data. It is recommended that the implementor returns
    /// an [InvalidCertificate] error with the [BadEncoding] variant when these cases are encountered.
    ///
    /// [InvalidCertificate]: Error#variant.InvalidCertificate
    /// [BadEncoding]: crate::CertificateError#variant.BadEncoding
    fn verify_client_cert(
        &self,
        end_entity: &CertificateDer<'_>,
        intermediates: &[CertificateDer<'_>],
        now: UnixTime,
    ) -> Result<ClientCertVerified, Error>;

    /// Verify a signature allegedly by the given client certificate.
    ///
    /// `message` is not hashed, and needs hashing during the verification.
    /// The signature and algorithm are within `dss`.  `cert` contains the
    /// public key to use.
    ///
    /// `cert` has already been validated by [`ClientCertVerifier::verify_client_cert`].
    ///
    /// If and only if the signature is valid, return `Ok(HandshakeSignatureValid)`.
    /// Otherwise, return an error -- rustls will send an alert and abort the
    /// connection.
    ///
    /// This method is only called for TLS1.2 handshakes.  Note that, in TLS1.2,
    /// SignatureSchemes such as `SignatureScheme::ECDSA_NISTP256_SHA256` are not
    /// in fact bound to the specific curve implied in their name.
    fn verify_tls12_signature(
        &self,
        message: &[u8],
        cert: &CertificateDer<'_>,
        dss: &DigitallySignedStruct,
    ) -> Result<HandshakeSignatureValid, Error>;

    /// Verify a signature allegedly by the given client certificate.
    ///
    /// This method is only called for TLS1.3 handshakes.
    ///
    /// This method is very similar to `verify_tls12_signature`, but note the
    /// tighter ECDSA SignatureScheme semantics in TLS 1.3. For example,
    /// `SignatureScheme::ECDSA_NISTP256_SHA256`
    /// must only validate signatures using public keys on the right curve --
    /// rustls does not enforce this requirement for you.
    fn verify_tls13_signature(
        &self,
        message: &[u8],
        cert: &CertificateDer<'_>,
        dss: &DigitallySignedStruct,
    ) -> Result<HandshakeSignatureValid, Error>;

    /// Return the list of SignatureSchemes that this verifier will handle,
    /// in `verify_tls12_signature` and `verify_tls13_signature` calls.
    ///
    /// This should be in priority order, with the most preferred first.
    fn supported_verify_schemes(&self) -> Vec<SignatureScheme>;
}

/// Turns off client authentication. In contrast to using
/// `WebPkiClientVerifier::builder(roots).allow_unauthenticated().build()`, the `NoClientAuth`
/// `ClientCertVerifier` will not offer client authentication at all, vs offering but not
/// requiring it.
#[derive(Debug)]
pub struct NoClientAuth;

impl ClientCertVerifier for NoClientAuth {
    fn offer_client_auth(&self) -> bool {
        false
    }

    fn root_hint_subjects(&self) -> &[DistinguishedName] {
        unimplemented!();
    }

    fn verify_client_cert(
        &self,
        _end_entity: &CertificateDer<'_>,
        _intermediates: &[CertificateDer<'_>],
        _now: UnixTime,
    ) -> Result<ClientCertVerified, Error> {
        unimplemented!();
    }

    fn verify_tls12_signature(
        &self,
        _message: &[u8],
        _cert: &CertificateDer<'_>,
        _dss: &DigitallySignedStruct,
    ) -> Result<HandshakeSignatureValid, Error> {
        unimplemented!();
    }

    fn verify_tls13_signature(
        &self,
        _message: &[u8],
        _cert: &CertificateDer<'_>,
        _dss: &DigitallySignedStruct,
    ) -> Result<HandshakeSignatureValid, Error> {
        unimplemented!();
    }

    fn supported_verify_schemes(&self) -> Vec<SignatureScheme> {
        unimplemented!();
    }
}

/// This type combines a [`SignatureScheme`] and a signature payload produced with that scheme.
#[derive(Debug, Clone)]
pub struct DigitallySignedStruct {
    /// The [`SignatureScheme`] used to produce the signature.
    pub scheme: SignatureScheme,
    sig: PayloadU16,
}

impl DigitallySignedStruct {
    pub(crate) fn new(scheme: SignatureScheme, sig: Vec<u8>) -> Self {
        Self {
            scheme,
            sig: PayloadU16::new(sig),
        }
    }

    /// Get the signature.
    pub fn signature(&self) -> &[u8] {
        &self.sig.0
    }
}

impl Codec<'_> for DigitallySignedStruct {
    fn encode(&self, bytes: &mut Vec<u8>) {
        self.scheme.encode(bytes);
        self.sig.encode(bytes);
    }

    fn read(r: &mut Reader) -> Result<Self, InvalidMessage> {
        let scheme = SignatureScheme::read(r)?;
        let sig = PayloadU16::read(r)?;

        Ok(Self { scheme, sig })
    }
}

#[test]
fn assertions_are_debug() {
    use std::format;

    assert_eq!(
        format!("{:?}", ClientCertVerified::assertion()),
        "ClientCertVerified(())"
    );
    assert_eq!(
        format!("{:?}", HandshakeSignatureValid::assertion()),
        "HandshakeSignatureValid(())"
    );
    assert_eq!(
        format!("{:?}", FinishedMessageVerified::assertion()),
        "FinishedMessageVerified(())"
    );
    assert_eq!(
        format!("{:?}", ServerCertVerified::assertion()),
        "ServerCertVerified(())"
    );
}