# rust-lapper
[Documentation](https://docs.rs/rust-lapper)
[Crates.io](https://crates.io/crates/rust-lapper)
This is a rust port of Brent Pendersen's
[nim-lapper](https://github.com/brentp/nim-lapper). It has a few notable
differences, mostly that the find and seek methods both return
iterators, so all adaptor methods may be used normally.
This crate works well for most interval data that does not include very long
intervals that engulf a majority of other intervals. It is still fairly
comporable to other methods, even in it's worst case. See benchmarks
below. If you absolutely need more guarentees around worst case I would
recommend [AIList](https://github.com/sstadick/AIList) which handles
large overlaps better at the cost of most normal cases.
However, on more typical datasets, this crate is between 4-10x faster
than other interval overlap methods.
It should also be noted that the `count` method is agnostic to data
type, and should be about as fast as it is possible to be on any
dataset. It is an implementation of the [BITS
algorithm](https://academic.oup.com/bioinformatics/article/29/1/1/273289)
## Benchmarks
Benchmarking interval tree-ish datastructures is hard
Please see the
[interval_bakeoff](https://github.com/sstadick/interval_bakeoff) project
for details on how the benchmarks were run... It's not fully baked yet
though, and is finiky to run.
Command to run:
```
./target/release/interval_bakeoff fake -a -l ScAIList -l RustLapper -l
RustBio -l NestedInterval -n50000 -u100000
# This equates to the following params:
# num_intervals 50000
# universe_size 100000
# min_interval_size 500
# max_interval_size 80000
# add_large_span true (universe spanning)
```
Set A / b Creation Times
|rust_lapper|15.625ms| 31.25ms|
|scailist|15.625ms| 15.625ms|
|nested_intervals|15.625ms| 15.625ms|
|bio|15.625ms| 31.25ms|
100% hit rate (A vs A)
|rust_lapper/find| 4.78125s | 1469068763 |
|rust_lapper/count|15.625ms|1469068763 |
|scailist/find|4.640625s| 1469068763|
|nested_intervals/query_overlapping|157.4375s|1469068763|
|bio/find|33.296875s|1469068763 |
Sub 100% hit rate (A vs B)
|rust_lapper/find|531.25ms|176488436|
|rust_lapper/count|15.625ms|176488436 |
|scailist/find| 671.875ms|176488436 |
|nested_intervals/query_overlapping| 11.109375s|196090092|
|bio/find|4.3125s|176488436|
[nested_intervals](https://docs.rs/nested_intervals/0.2.0/nested_intervals/)
[rust-bio](https://docs.rs/bio/0.28.2/bio/)
[ScAIList]()
## Example
```rust
use rust_lapper::{Interval, Lapper};
type Iv = Interval<u32>;
fn main() {
// create some fake data
let data: Vec<Iv> = vec![
Iv{start: 70, stop: 120, val: 0}, // max_len = 50
Iv{start: 10, stop: 15, val: 0},
Iv{start: 10, stop: 15, val: 0}, // exact overlap
Iv{start: 12, stop: 15, val: 0}, // inner overlap
Iv{start: 14, stop: 16, val: 0}, // overlap end
Iv{start: 40, stop: 45, val: 0},
Iv{start: 50, stop: 55, val: 0},
Iv{start: 60, stop: 65, val: 0},
Iv{start: 68, stop: 71, val: 0}, // overlap start
Iv{start: 70, stop: 75, val: 0},
];
// Make lapper structure
let mut lapper = Lapper::new(data);
// Iterator based find to extract all intervals that overlap 6..7
// If your queries are coming in start sorted order, use the seek method to retain a cursor for
// a big speedup.
assert_eq!(
lapper.find(11, 15).collect::<Vec<&Iv>>(), vec![
&Iv{start: 10, stop: 15, val: 0},
&Iv{start: 10, stop: 15, val: 0}, // exact overlap
&Iv{start: 12, stop: 15, val: 0}, // inner overlap
&Iv{start: 14, stop: 16, val: 0}, // overlap end
]
);
// Merge overlapping regions within the lapper to simlify and speed up queries that only depend
// on 'any' overlap and not how many
lapper.merge_overlaps();
assert_eq!(
lapper.find(11, 15).collect::<Vec<&Iv>>(), vec![
&Iv{start: 10, stop: 16, val: 0},
]
);
// Get the number of positions covered by the lapper tree:
assert_eq!(lapper.cov(), 73);
// Get the union and intersect of two different lapper trees
let data = vec![
Iv{start: 5, stop: 15, val: 0},
Iv{start: 48, stop: 80, val: 0},
];
let (union, intersect) = lapper.union_and_intersect(&Lapper::new(data));
assert_eq!(union, 88);
assert_eq!(intersect, 27);
}
```
## Release Notes
-`0.4.0`: Addition of the BITS count algorithm.
-`0.4.2`: Bugfix in to update starts/stops vectors when overlaps merged
-`0.4.3`: Remove leftover print statement