[−][src]Enum rusoto_ssm::CreateAssociationBatchError
Errors returned by CreateAssociationBatch
Variants
AssociationLimitExceeded(String)
You can have at most 2,000 active associations.
DuplicateInstanceId(String)
You cannot specify an instance ID in more than one association.
InternalServerError(String)
An error occurred on the server side.
InvalidDocument(String)
The specified document does not exist.
InvalidDocumentVersion(String)
The document version is not valid or does not exist.
InvalidInstanceId(String)
The following problems can cause this exception:
You do not have permission to access the instance.
SSM Agent is not running. On managed instances and Linux instances, verify that the SSM Agent is running. On EC2 Windows instances, verify that the EC2Config service is running.
SSM Agent or EC2Config service is not registered to the SSM endpoint. Try reinstalling SSM Agent or EC2Config service.
The instance is not in valid state. Valid states are: Running, Pending, Stopped, Stopping. Invalid states are: Shutting-down and Terminated.
InvalidOutputLocation(String)
The output location is not valid or does not exist.
InvalidParameters(String)
You must specify values for all required parameters in the Systems Manager document. You can only supply values to parameters defined in the Systems Manager document.
InvalidSchedule(String)
The schedule is invalid. Verify your cron or rate expression and try again.
InvalidTarget(String)
The target is not valid or does not exist. It might not be configured for EC2 Systems Manager or you might not have permission to perform the operation.
UnsupportedPlatformType(String)
The document does not support the platform type of the given instance ID(s). For example, you sent an document for a Windows instance to a Linux instance.
HttpDispatch(HttpDispatchError)
An error occurred dispatching the HTTP request
Credentials(CredentialsError)
An error was encountered with AWS credentials.
Validation(String)
A validation error occurred. Details from AWS are provided.
ParseError(String)
An error occurred parsing the response payload.
Unknown(BufferedHttpResponse)
An unknown error occurred. The raw HTTP response is provided.
Methods
impl CreateAssociationBatchError
[src]
impl CreateAssociationBatchError
pub fn from_response(res: BufferedHttpResponse) -> CreateAssociationBatchError
[src]
pub fn from_response(res: BufferedHttpResponse) -> CreateAssociationBatchError
Trait Implementations
impl PartialEq<CreateAssociationBatchError> for CreateAssociationBatchError
[src]
impl PartialEq<CreateAssociationBatchError> for CreateAssociationBatchError
fn eq(&self, other: &CreateAssociationBatchError) -> bool
[src]
fn eq(&self, other: &CreateAssociationBatchError) -> bool
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &CreateAssociationBatchError) -> bool
[src]
fn ne(&self, other: &CreateAssociationBatchError) -> bool
This method tests for !=
.
impl From<Error> for CreateAssociationBatchError
[src]
impl From<Error> for CreateAssociationBatchError
fn from(err: Error) -> CreateAssociationBatchError
[src]
fn from(err: Error) -> CreateAssociationBatchError
Performs the conversion.
impl From<CredentialsError> for CreateAssociationBatchError
[src]
impl From<CredentialsError> for CreateAssociationBatchError
fn from(err: CredentialsError) -> CreateAssociationBatchError
[src]
fn from(err: CredentialsError) -> CreateAssociationBatchError
Performs the conversion.
impl From<HttpDispatchError> for CreateAssociationBatchError
[src]
impl From<HttpDispatchError> for CreateAssociationBatchError
fn from(err: HttpDispatchError) -> CreateAssociationBatchError
[src]
fn from(err: HttpDispatchError) -> CreateAssociationBatchError
Performs the conversion.
impl From<Error> for CreateAssociationBatchError
[src]
impl From<Error> for CreateAssociationBatchError
fn from(err: Error) -> CreateAssociationBatchError
[src]
fn from(err: Error) -> CreateAssociationBatchError
Performs the conversion.
impl Debug for CreateAssociationBatchError
[src]
impl Debug for CreateAssociationBatchError
fn fmt(&self, f: &mut Formatter) -> Result
[src]
fn fmt(&self, f: &mut Formatter) -> Result
Formats the value using the given formatter. Read more
impl Display for CreateAssociationBatchError
[src]
impl Display for CreateAssociationBatchError
fn fmt(&self, f: &mut Formatter) -> Result
[src]
fn fmt(&self, f: &mut Formatter) -> Result
Formats the value using the given formatter. Read more
impl Error for CreateAssociationBatchError
[src]
impl Error for CreateAssociationBatchError
fn description(&self) -> &str
[src]
fn description(&self) -> &str
This method is soft-deprecated. Read more
fn cause(&self) -> Option<&dyn Error>
1.0.0[src]
fn cause(&self) -> Option<&dyn Error>
: replaced by Error::source, which can support downcasting
The lower-level cause of this error, if any. Read more
fn source(&self) -> Option<&(dyn Error + 'static)>
1.30.0[src]
fn source(&self) -> Option<&(dyn Error + 'static)>
The lower-level source of this error, if any. Read more
Auto Trait Implementations
impl Send for CreateAssociationBatchError
impl Send for CreateAssociationBatchError
impl Sync for CreateAssociationBatchError
impl Sync for CreateAssociationBatchError
Blanket Implementations
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> ToString for T where
T: Display + ?Sized,
[src]
impl<T> ToString for T where
T: Display + ?Sized,
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more
impl<T> Same for T
impl<T> Same for T
type Output = T
Should always be Self
impl<T> Erased for T
impl<T> Erased for T