Struct rusoto_mediaconvert::Eac3Settings

pub struct Eac3Settings {
    pub attenuation_control: Option<String>,
    pub bitrate: Option<i64>,
    pub bitstream_mode: Option<String>,
    pub coding_mode: Option<String>,
    pub dc_filter: Option<String>,
    pub dialnorm: Option<i64>,
    pub dynamic_range_compression_line: Option<String>,
    pub dynamic_range_compression_rf: Option<String>,
    pub lfe_control: Option<String>,
    pub lfe_filter: Option<String>,
    pub lo_ro_center_mix_level: Option<f64>,
    pub lo_ro_surround_mix_level: Option<f64>,
    pub lt_rt_center_mix_level: Option<f64>,
    pub lt_rt_surround_mix_level: Option<f64>,
    pub metadata_control: Option<String>,
    pub passthrough_control: Option<String>,
    pub phase_control: Option<String>,
    pub sample_rate: Option<i64>,
    pub stereo_downmix: Option<String>,
    pub surround_ex_mode: Option<String>,
    pub surround_mode: Option<String>,
}

Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.

Fields

attenuation_control: Option<String>

If set to ATTENUATE3DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.

bitrate: Option<i64>

Specify the average bitrate in bits per second. Valid bitrates depend on the coding mode.

bitstream_mode: Option<String>

Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).

coding_mode: Option<String>

Dolby Digital Plus coding mode. Determines number of channels.

dc_filter: Option<String>

Activates a DC highpass filter for all input channels.

dialnorm: Option<i64>

Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.

dynamic_range_compression_line: Option<String>

Specify the absolute peak level for a signal with dynamic range compression.

dynamic_range_compression_rf: Option<String>

Specify how the service limits the audio dynamic range when compressing the audio.

lfe_control: Option<String>

When encoding 3/2 audio, controls whether the LFE channel is enabled

lfe_filter: Option<String>

Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 32LFE coding mode.

lo_ro_center_mix_level: Option<f64>

Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODINGMODE3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).

lo_ro_surround_mix_level: Option<f64>

Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODINGMODE3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).

lt_rt_center_mix_level: Option<f64>

Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODINGMODE3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).

lt_rt_surround_mix_level: Option<f64>

Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODINGMODE3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).

metadata_control: Option<String>

When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.

passthrough_control: Option<String>

When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.

phase_control: Option<String>

Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.

sample_rate: Option<i64>

This value is always 48000. It represents the sample rate in Hz.

stereo_downmix: Option<String>

Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODINGMODE3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).

surround_ex_mode: Option<String>

When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.

surround_mode: Option<String>

When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.

Trait Implementations

impl Clone for Eac3Settings

fn clone(&self) -> Eac3Settings

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Eac3Settings

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Default for Eac3Settings

fn default() -> Eac3Settings

Returns the "default value" for a type.

impl<'de> Deserialize<'de> for Eac3Settings

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error> where
    __D: Deserializer<'de>, 

Deserialize this value from the given Serde deserializer.

impl PartialEq<Eac3Settings> for Eac3Settings

fn eq(&self, other: &Eac3Settings) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Eac3Settings) -> bool

This method tests for !=.

impl Serialize for Eac3Settings

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error> where
    __S: Serializer, 

Serialize this value into the given Serde serializer.

impl StructuralPartialEq for Eac3Settings