[−][src]Struct rusoto_lex_models::PutBotRequest
Fields
abort_statement: Option<Statement>
When Amazon Lex can't understand the user's input in context, it tries to elicit the information a few times. After that, Amazon Lex sends the message defined in abortStatement
to the user, and then aborts the conversation. To set the number of retries, use the valueElicitationPrompt
field for the slot type.
For example, in a pizza ordering bot, Amazon Lex might ask a user "What type of crust would you like?" If the user's response is not one of the expected responses (for example, "thin crust, "deep dish," etc.), Amazon Lex tries to elicit a correct response a few more times.
For example, in a pizza ordering application, OrderPizza
might be one of the intents. This intent might require the CrustType
slot. You specify the valueElicitationPrompt
field when you create the CrustType
slot.
If you have defined a fallback intent the abort statement will not be sent to the user, the fallback intent is used instead. For more information, see AMAZON.FallbackIntent.
checksum: Option<String>
Identifies a specific revision of the $LATEST
version.
When you create a new bot, leave the checksum
field blank. If you specify a checksum you get a BadRequestException
exception.
When you want to update a bot, set the checksum
field to the checksum of the most recent revision of the $LATEST
version. If you don't specify the checksum
field, or if the checksum does not match the $LATEST
version, you get a PreconditionFailedException
exception.
child_directed: bool
For each Amazon Lex bot created with the Amazon Lex Model Building Service, you must specify whether your use of Amazon Lex is related to a website, program, or other application that is directed or targeted, in whole or in part, to children under age 13 and subject to the Children's Online Privacy Protection Act (COPPA) by specifying true
or false
in the childDirected
field. By specifying true
in the childDirected
field, you confirm that your use of Amazon Lex is related to a website, program, or other application that is directed or targeted, in whole or in part, to children under age 13 and subject to COPPA. By specifying false
in the childDirected
field, you confirm that your use of Amazon Lex is not related to a website, program, or other application that is directed or targeted, in whole or in part, to children under age 13 and subject to COPPA. You may not specify a default value for the childDirected
field that does not accurately reflect whether your use of Amazon Lex is related to a website, program, or other application that is directed or targeted, in whole or in part, to children under age 13 and subject to COPPA.
If your use of Amazon Lex relates to a website, program, or other application that is directed in whole or in part, to children under age 13, you must obtain any required verifiable parental consent under COPPA. For information regarding the use of Amazon Lex in connection with websites, programs, or other applications that are directed or targeted, in whole or in part, to children under age 13, see the Amazon Lex FAQ.
clarification_prompt: Option<Prompt>
When Amazon Lex doesn't understand the user's intent, it uses this message to get clarification. To specify how many times Amazon Lex should repeat the clarification prompt, use the maxAttempts
field. If Amazon Lex still doesn't understand, it sends the message in the abortStatement
field.
When you create a clarification prompt, make sure that it suggests the correct response from the user. for example, for a bot that orders pizza and drinks, you might create this clarification prompt: "What would you like to do? You can say 'Order a pizza' or 'Order a drink.'"
If you have defined a fallback intent, it will be invoked if the clarification prompt is repeated the number of times defined in the maxAttempts
field. For more information, see AMAZON.FallbackIntent.
If you don't define a clarification prompt, at runtime Amazon Lex will return a 400 Bad Request exception in three cases:
-
Follow-up prompt - When the user responds to a follow-up prompt but does not provide an intent. For example, in response to a follow-up prompt that says "Would you like anything else today?" the user says "Yes." Amazon Lex will return a 400 Bad Request exception because it does not have a clarification prompt to send to the user to get an intent.
-
Lambda function - When using a Lambda function, you return an
ElicitIntent
dialog type. Since Amazon Lex does not have a clarification prompt to get an intent from the user, it returns a 400 Bad Request exception. -
PutSession operation - When using the
PutSession
operation, you send anElicitIntent
dialog type. Since Amazon Lex does not have a clarification prompt to get an intent from the user, it returns a 400 Bad Request exception.
create_version: Option<bool>
When set to true
a new numbered version of the bot is created. This is the same as calling the CreateBotVersion
operation. If you don't specify createVersion
, the default is false
.
description: Option<String>
A description of the bot.
detect_sentiment: Option<bool>
When set to true
user utterances are sent to Amazon Comprehend for sentiment analysis. If you don't specify detectSentiment
, the default is false
.
idle_session_ttl_in_seconds: Option<i64>
The maximum time in seconds that Amazon Lex retains the data gathered in a conversation.
A user interaction session remains active for the amount of time specified. If no conversation occurs during this time, the session expires and Amazon Lex deletes any data provided before the timeout.
For example, suppose that a user chooses the OrderPizza intent, but gets sidetracked halfway through placing an order. If the user doesn't complete the order within the specified time, Amazon Lex discards the slot information that it gathered, and the user must start over.
If you don't include the idleSessionTTLInSeconds
element in a PutBot
operation request, Amazon Lex uses the default value. This is also true if the request replaces an existing bot.
The default is 300 seconds (5 minutes).
intents: Option<Vec<Intent>>
An array of Intent
objects. Each intent represents a command that a user can express. For example, a pizza ordering bot might support an OrderPizza intent. For more information, see how-it-works.
locale: String
Specifies the target locale for the bot. Any intent used in the bot must be compatible with the locale of the bot.
The default is en-US
.
name: String
The name of the bot. The name is not case sensitive.
process_behavior: Option<String>
If you set the processBehavior
element to BUILD
, Amazon Lex builds the bot so that it can be run. If you set the element to SAVE
Amazon Lex saves the bot, but doesn't build it.
If you don't specify this value, the default value is BUILD
.
A list of tags to add to the bot. You can only add tags when you create a bot, you can't use the PutBot
operation to update the tags on a bot. To update tags, use the TagResource
operation.
voice_id: Option<String>
The Amazon Polly voice ID that you want Amazon Lex to use for voice interactions with the user. The locale configured for the voice must match the locale of the bot. For more information, see Voices in Amazon Polly in the Amazon Polly Developer Guide.
Trait Implementations
impl Clone for PutBotRequest
[src]
fn clone(&self) -> PutBotRequest
[src]
fn clone_from(&mut self, source: &Self)
1.0.0[src]
impl Debug for PutBotRequest
[src]
impl Default for PutBotRequest
[src]
fn default() -> PutBotRequest
[src]
impl PartialEq<PutBotRequest> for PutBotRequest
[src]
fn eq(&self, other: &PutBotRequest) -> bool
[src]
fn ne(&self, other: &PutBotRequest) -> bool
[src]
impl Serialize for PutBotRequest
[src]
fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error> where
__S: Serializer,
[src]
__S: Serializer,
impl StructuralPartialEq for PutBotRequest
[src]
Auto Trait Implementations
impl RefUnwindSafe for PutBotRequest
impl Send for PutBotRequest
impl Sync for PutBotRequest
impl Unpin for PutBotRequest
impl UnwindSafe for PutBotRequest
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<T> Sealed<T> for T where
T: ?Sized,
T: ?Sized,
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
fn to_owned(&self) -> T
[src]
fn clone_into(&self, target: &mut T)
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,