Struct qt_gui::QDrag

#[repr(C)]
pub struct QDrag { /* private fields */ }

The QDrag class provides support for MIME-based drag and drop data transfer.

C++ class: QDrag.

C++ documentation:

The QDrag class provides support for MIME-based drag and drop data transfer.

Drag and drop is an intuitive way for users to copy or move data around in an application, and is used in many desktop environments as a mechanism for copying data between applications. Drag and drop support in Qt is centered around the QDrag class that handles most of the details of a drag and drop operation.

The data to be transferred by the drag and drop operation is contained in a QMimeData object. This is specified with the setMimeData() function in the following way:

          QDrag drag = new QDrag(this);
          QMimeData mimeData = new QMimeData;
          mimeData->setText(commentEdit->toPlainText());
          drag->setMimeData(mimeData);

Note that setMimeData() assigns ownership of the QMimeData object to the QDrag object. The QDrag must be constructed on the heap with a parent QObject to ensure that Qt can clean up after the drag and drop operation has been completed.

A pixmap can be used to represent the data while the drag is in progress, and will move with the cursor to the drop target. This pixmap typically shows an icon that represents the MIME type of the data being transferred, but any pixmap can be set with setPixmap(). The cursor's hot spot can be given a position relative to the top-left corner of the pixmap with the setHotSpot() function. The following code positions the pixmap so that the cursor's hot spot points to the center of its bottom edge:

      drag->setHotSpot(QPoint(drag->pixmap().width()/2,
                              drag->pixmap().height()));

Note: On X11, the pixmap may not be able to keep up with the mouse movements if the hot spot causes the pixmap to be displayed directly under the cursor.

The source and target widgets can be found with source() and target(). These functions are often used to determine whether drag and drop operations started and finished at the same widget, so that special behavior can be implemented.

QDrag only deals with the drag and drop operation itself. It is up to the developer to decide when a drag operation begins, and how a QDrag object should be constructed and used. For a given widget, it is often necessary to reimplement mousePressEvent() to determine whether the user has pressed a mouse button, and reimplement mouseMoveEvent() to check whether a QDrag is required.

Implementations

impl QDrag

pub fn action_changed(&self) -> Signal<(DropAction,)>

This signal is emitted when the action associated with the drag changes.

Returns a built-in Qt signal QDrag::actionChanged that can be passed to qt_core::Signal::connect.

C++ documentation:

This signal is emitted when the action associated with the drag changes.

See also targetChanged().

pub fn target_changed(&self) -> Signal<(*mut QObject,)>

This signal is emitted when the target of the drag and drop operation changes, with newTarget the new target.

Returns a built-in Qt signal QDrag::targetChanged that can be passed to qt_core::Signal::connect.

C++ documentation:

This signal is emitted when the target of the drag and drop operation changes, with newTarget the new target.

See also target() and actionChanged().

pub unsafe fn cancel()

Cancels a drag operation initiated by Qt.

Calls C++ function: static void QDrag::cancel().

C++ documentation:

Cancels a drag operation initiated by Qt.

Note: This is currently implemented on Windows and X11.

This function was introduced in Qt 5.7.

See also exec().

pub unsafe fn default_action(&self) -> DropAction

Returns the default proposed drop action for this drag operation.

Calls C++ function: Qt::DropAction QDrag::defaultAction() const.

C++ documentation:

Returns the default proposed drop action for this drag operation.

See also exec() and supportedActions().

pub unsafe fn drag_cursor(&self, action: DropAction) -> CppBox<QPixmap>

Returns the drag cursor for the action.

Calls C++ function: QPixmap QDrag::dragCursor(Qt::DropAction action) const.

C++ documentation:

Returns the drag cursor for the action.

This function was introduced in Qt 5.0.

See also setDragCursor().

pub unsafe fn exec_1a( &self, supported_actions: QFlags<DropAction> ) -> DropAction

Starts the drag and drop operation and returns a value indicating the requested drop action when it is completed. The drop actions that the user can choose from are specified in supportedActions. The default proposed action will be selected among the allowed actions in the following order: Move, Copy and Link.

Calls C++ function: Qt::DropAction QDrag::exec(QFlags<Qt::DropAction> supportedActions = …).

C++ documentation:

Starts the drag and drop operation and returns a value indicating the requested drop action when it is completed. The drop actions that the user can choose from are specified in supportedActions. The default proposed action will be selected among the allowed actions in the following order: Move, Copy and Link.

Note: On Linux and macOS, the drag and drop operation can take some time, but this function does not block the event loop. Other events are still delivered to the application while the operation is performed. On Windows, the Qt event loop is blocked during the operation.

This function was introduced in Qt 4.3.

See also cancel().

pub unsafe fn exec_2a( &self, supported_actions: QFlags<DropAction>, default_action: DropAction ) -> DropAction

Starts the drag and drop operation and returns a value indicating the requested drop action when it is completed. The drop actions that the user can choose from are specified in supportedActions.

Calls C++ function: Qt::DropAction QDrag::exec(QFlags<Qt::DropAction> supportedActions, Qt::DropAction defaultAction).

C++ documentation:

Starts the drag and drop operation and returns a value indicating the requested drop action when it is completed. The drop actions that the user can choose from are specified in supportedActions.

The defaultDropAction determines which action will be proposed when the user performs a drag without using modifier keys.

Note: On Linux and macOS, the drag and drop operation can take some time, but this function does not block the event loop. Other events are still delivered to the application while the operation is performed. On Windows, the Qt event loop is blocked during the operation. However, QDrag::exec() on Windows causes processEvents() to be called frequently to keep the GUI responsive. If any loops or operations are called while a drag operation is active, it will block the drag operation.

This function was introduced in Qt 4.3.

pub unsafe fn exec_0a(&self) -> DropAction

Starts the drag and drop operation and returns a value indicating the requested drop action when it is completed. The drop actions that the user can choose from are specified in supportedActions. The default proposed action will be selected among the allowed actions in the following order: Move, Copy and Link.

Calls C++ function: Qt::DropAction QDrag::exec().

C++ documentation:

Starts the drag and drop operation and returns a value indicating the requested drop action when it is completed. The drop actions that the user can choose from are specified in supportedActions. The default proposed action will be selected among the allowed actions in the following order: Move, Copy and Link.

Note: On Linux and macOS, the drag and drop operation can take some time, but this function does not block the event loop. Other events are still delivered to the application while the operation is performed. On Windows, the Qt event loop is blocked during the operation.

This function was introduced in Qt 4.3.

See also cancel().

pub unsafe fn hot_spot(&self) -> CppBox<QPoint>

Returns the position of the hot spot relative to the top-left corner of the cursor.

Calls C++ function: QPoint QDrag::hotSpot() const.

C++ documentation:

Returns the position of the hot spot relative to the top-left corner of the cursor.

See also setHotSpot().

pub unsafe fn meta_object(&self) -> Ptr<QMetaObject>

Calls C++ function: virtual const QMetaObject* QDrag::metaObject() const.

pub unsafe fn mime_data(&self) -> QPtr<QMimeData>

Returns the MIME data that is encapsulated by the drag object.

Calls C++ function: QMimeData* QDrag::mimeData() const.

C++ documentation:

Returns the MIME data that is encapsulated by the drag object.

See also setMimeData().

pub unsafe fn new(drag_source: impl CastInto<Ptr<QObject>>) -> QBox<QDrag>

Constructs a new drag object for the widget specified by dragSource.

Calls C++ function: [constructor] void QDrag::QDrag(QObject* dragSource).

C++ documentation:

Constructs a new drag object for the widget specified by dragSource.

pub unsafe fn pixmap(&self) -> CppBox<QPixmap>

Returns the pixmap used to represent the data in a drag and drop operation.

Calls C++ function: QPixmap QDrag::pixmap() const.

C++ documentation:

Returns the pixmap used to represent the data in a drag and drop operation.

See also setPixmap().

pub unsafe fn qt_metacall( &self, arg1: Call, arg2: c_int, arg3: *mut *mut c_void ) -> c_int

Calls C++ function: virtual int QDrag::qt_metacall(QMetaObject::Call arg1, int arg2, void** arg3).

pub unsafe fn qt_metacast(&self, arg1: *const c_char) -> *mut c_void

Calls C++ function: virtual void* QDrag::qt_metacast(const char* arg1).

pub unsafe fn set_drag_cursor( &self, cursor: impl CastInto<Ref<QPixmap>>, action: DropAction )

Sets the drag cursor for the action. This allows you to override the default native cursors. To revert to using the native cursor for action pass in a null QPixmap as cursor.

Calls C++ function: void QDrag::setDragCursor(const QPixmap& cursor, Qt::DropAction action).

C++ documentation:

Sets the drag cursor for the action. This allows you to override the default native cursors. To revert to using the native cursor for action pass in a null QPixmap as cursor.

The action can only be CopyAction, MoveAction or LinkAction. All other values of DropAction are ignored.

See also dragCursor().

pub unsafe fn set_hot_spot(&self, hotspot: impl CastInto<Ref<QPoint>>)

Sets the position of the hot spot relative to the top-left corner of the pixmap used to the point specified by hotspot.

Calls C++ function: void QDrag::setHotSpot(const QPoint& hotspot).

C++ documentation:

Sets the position of the hot spot relative to the top-left corner of the pixmap used to the point specified by hotspot.

Note: on X11, the pixmap may not be able to keep up with the mouse movements if the hot spot causes the pixmap to be displayed directly under the cursor.

See also hotSpot().

pub unsafe fn set_mime_data(&self, data: impl CastInto<Ptr<QMimeData>>)

Sets the data to be sent to the given MIME data. Ownership of the data is transferred to the QDrag object.

Calls C++ function: void QDrag::setMimeData(QMimeData* data).

C++ documentation:

Sets the data to be sent to the given MIME data. Ownership of the data is transferred to the QDrag object.

See also mimeData().

pub unsafe fn set_pixmap(&self, arg1: impl CastInto<Ref<QPixmap>>)

Sets pixmap as the pixmap used to represent the data in a drag and drop operation. You can only set a pixmap before the drag is started.

Calls C++ function: void QDrag::setPixmap(const QPixmap& arg1).

C++ documentation:

Sets pixmap as the pixmap used to represent the data in a drag and drop operation. You can only set a pixmap before the drag is started.

See also pixmap().

pub unsafe fn source(&self) -> QPtr<QObject>

Returns the source of the drag object. This is the widget where the drag and drop operation originated.

Calls C++ function: QObject* QDrag::source() const.

C++ documentation:

Returns the source of the drag object. This is the widget where the drag and drop operation originated.

pub unsafe fn start_1a( &self, supported_actions: QFlags<DropAction> ) -> DropAction

Note: It is recommended to use exec() instead of this function.

Calls C++ function: Qt::DropAction QDrag::start(QFlags<Qt::DropAction> supportedActions = …).

C++ documentation:

Note: It is recommended to use exec() instead of this function.

Starts the drag and drop operation and returns a value indicating the requested drop action when it is completed. The drop actions that the user can choose from are specified in request. Qt::CopyAction is always allowed.

Note: Although the drag and drop operation can take some time, this function does not block the event loop. Other events are still delivered to the application while the operation is performed.

See also exec().

pub unsafe fn start_0a(&self) -> DropAction

Note: It is recommended to use exec() instead of this function.

Calls C++ function: Qt::DropAction QDrag::start().

C++ documentation:

Note: It is recommended to use exec() instead of this function.

Starts the drag and drop operation and returns a value indicating the requested drop action when it is completed. The drop actions that the user can choose from are specified in request. Qt::CopyAction is always allowed.

Note: Although the drag and drop operation can take some time, this function does not block the event loop. Other events are still delivered to the application while the operation is performed.

See also exec().

pub unsafe fn static_meta_object() -> Ref<QMetaObject>

Returns a reference to the staticMetaObject field.

pub unsafe fn supported_actions(&self) -> QFlags<DropAction>

Returns the set of possible drop actions for this drag operation.

Calls C++ function: QFlags<Qt::DropAction> QDrag::supportedActions() const.

C++ documentation:

Returns the set of possible drop actions for this drag operation.

See also exec() and defaultAction().

pub unsafe fn target(&self) -> QPtr<QObject>

Returns the target of the drag and drop operation. This is the widget where the drag object was dropped.

Calls C++ function: QObject* QDrag::target() const.

C++ documentation:

Returns the target of the drag and drop operation. This is the widget where the drag object was dropped.

pub unsafe fn tr( s: *const c_char, c: *const c_char, n: c_int ) -> CppBox<QString>

Calls C++ function: static QString QDrag::tr(const char* s, const char* c, int n).

pub unsafe fn tr_utf8( s: *const c_char, c: *const c_char, n: c_int ) -> CppBox<QString>

Calls C++ function: static QString QDrag::trUtf8(const char* s, const char* c, int n).

Methods from Deref<Target = QObject>

pub unsafe fn find_child<T>( &self, name: &str ) -> Result<QPtr<T>, FindChildError>

where QObject: DynamicCast<T>, T: StaticUpcast<QObject>,

Finds a child of self with the specified object name and casts it to type T.

The search is performed recursively. If there is more than one child matching the search, the most direct ancestor is returned. If there are several direct ancestors, it is undefined which one will be returned.

Returns an error if there is no child object with object name name or the found object cannot be cast to T.

pub fn destroyed(&self) -> Signal<(*mut QObject,)>

This signal is emitted immediately before the object obj is destroyed, and can not be blocked.

Returns a built-in Qt signal QObject::destroyed that can be passed to qt_core::Signal::connect.

C++ documentation:

This signal is emitted immediately before the object obj is destroyed, and can not be blocked.

All the objects's children are destroyed immediately after this signal is emitted.

See also deleteLater() and QPointer.

pub fn object_name_changed(&self) -> Signal<(*const QString,)>

This signal is emitted after the object's name has been changed. The new object name is passed as objectName.

Returns a built-in Qt signal QObject::objectNameChanged that can be passed to qt_core::Signal::connect.

C++ documentation:

This signal is emitted after the object’s name has been changed. The new object name is passed as objectName.

Note: This is a private signal. It can be used in signal connections but cannot be emitted by the user.

Note: Notifier signal for property objectName.

See also QObject::objectName.

pub fn slot_delete_later(&self) -> Receiver<()>

Schedules this object for deletion.

Returns a built-in Qt slot QObject::deleteLater that can be passed to qt_core::Signal::connect.

C++ documentation:

Schedules this object for deletion.

The object will be deleted when control returns to the event loop. If the event loop is not running when this function is called (e.g. deleteLater() is called on an object before QCoreApplication::exec()), the object will be deleted once the event loop is started. If deleteLater() is called after the main event loop has stopped, the object will not be deleted. Since Qt 4.8, if deleteLater() is called on an object that lives in a thread with no running event loop, the object will be destroyed when the thread finishes.

Note that entering and leaving a new event loop (e.g., by opening a modal dialog) will not perform the deferred deletion; for the object to be deleted, the control must return to the event loop from which deleteLater() was called.

Note: It is safe to call this function more than once; when the first deferred deletion event is delivered, any pending events for the object are removed from the event queue.

See also destroyed() and QPointer.

pub unsafe fn block_signals(&self, b: bool) -> bool

If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it). If block is false, no such blocking will occur.

Calls C++ function: bool QObject::blockSignals(bool b).

C++ documentation:

If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it). If block is false, no such blocking will occur.

The return value is the previous value of signalsBlocked().

Note that the destroyed() signal will be emitted even if the signals for this object have been blocked.

Signals emitted while being blocked are not buffered.

See also signalsBlocked() and QSignalBlocker.

pub unsafe fn children(&self) -> Ref<QListOfQObject>

Returns a list of child objects. The QObjectList class is defined in the <QObject> header file as the following:

Calls C++ function: const QList<QObject*>& QObject::children() const.

C++ documentation:

Returns a list of child objects. The QObjectList class is defined in the <QObject> header file as the following:

  typedef QList<QObject*> QObjectList;

The first child added is the first object in the list and the last child added is the last object in the list, i.e. new children are appended at the end.

Note that the list order changes when QWidget children are raised or lowered. A widget that is raised becomes the last object in the list, and a widget that is lowered becomes the first object in the list.

See also findChild(), findChildren(), parent(), and setParent().

pub unsafe fn delete_later(&self)

Schedules this object for deletion.

Calls C++ function: [slot] void QObject::deleteLater().

C++ documentation:

Schedules this object for deletion.

The object will be deleted when control returns to the event loop. If the event loop is not running when this function is called (e.g. deleteLater() is called on an object before QCoreApplication::exec()), the object will be deleted once the event loop is started. If deleteLater() is called after the main event loop has stopped, the object will not be deleted. Since Qt 4.8, if deleteLater() is called on an object that lives in a thread with no running event loop, the object will be destroyed when the thread finishes.

Note that entering and leaving a new event loop (e.g., by opening a modal dialog) will not perform the deferred deletion; for the object to be deleted, the control must return to the event loop from which deleteLater() was called.

Note: It is safe to call this function more than once; when the first deferred deletion event is delivered, any pending events for the object are removed from the event queue.

See also destroyed() and QPointer.

pub unsafe fn disconnect_char_q_object_char( &self, signal: *const i8, receiver: impl CastInto<Ptr<QObject>>, member: *const i8 ) -> bool

This function overloads disconnect().

Calls C++ function: bool QObject::disconnect(const char* signal = …, const QObject* receiver = …, const char* member = …) const.

C++ documentation:

This function overloads disconnect().

Disconnects signal from method of receiver.

A signal-slot connection is removed when either of the objects involved are destroyed.

Note: This function is thread-safe.

pub unsafe fn disconnect_q_object_char( &self, receiver: impl CastInto<Ptr<QObject>>, member: *const i8 ) -> bool

This function overloads disconnect().

Calls C++ function: bool QObject::disconnect(const QObject* receiver, const char* member = …) const.

C++ documentation:

This function overloads disconnect().

Disconnects all signals in this object from receiver's method.

A signal-slot connection is removed when either of the objects involved are destroyed.

pub unsafe fn disconnect_char_q_object( &self, signal: *const i8, receiver: impl CastInto<Ptr<QObject>> ) -> bool

This function overloads disconnect().

Calls C++ function: bool QObject::disconnect(const char* signal = …, const QObject* receiver = …) const.

C++ documentation:

This function overloads disconnect().

Disconnects signal from method of receiver.

A signal-slot connection is removed when either of the objects involved are destroyed.

Note: This function is thread-safe.

pub unsafe fn disconnect_char(&self, signal: *const i8) -> bool

This function overloads disconnect().

Calls C++ function: bool QObject::disconnect(const char* signal = …) const.

C++ documentation:

This function overloads disconnect().

Disconnects signal from method of receiver.

A signal-slot connection is removed when either of the objects involved are destroyed.

Note: This function is thread-safe.

pub unsafe fn disconnect(&self) -> bool

This function overloads disconnect().

Calls C++ function: bool QObject::disconnect() const.

C++ documentation:

This function overloads disconnect().

Disconnects signal from method of receiver.

A signal-slot connection is removed when either of the objects involved are destroyed.

Note: This function is thread-safe.

pub unsafe fn disconnect_q_object( &self, receiver: impl CastInto<Ptr<QObject>> ) -> bool

This function overloads disconnect().

Calls C++ function: bool QObject::disconnect(const QObject* receiver) const.

C++ documentation:

This function overloads disconnect().

Disconnects all signals in this object from receiver's method.

A signal-slot connection is removed when either of the objects involved are destroyed.

pub unsafe fn dump_object_info_mut(&self)

Dumps information about signal connections, etc. for this object to the debug output.

Calls C++ function: void QObject::dumpObjectInfo().

C++ documentation:

Dumps information about signal connections, etc. for this object to the debug output.

Note: before Qt 5.9, this function was not const.

See also dumpObjectTree().

pub unsafe fn dump_object_info(&self)

Dumps information about signal connections, etc. for this object to the debug output.

Calls C++ function: void QObject::dumpObjectInfo() const.

C++ documentation:

Dumps information about signal connections, etc. for this object to the debug output.

Note: before Qt 5.9, this function was not const.

See also dumpObjectTree().

pub unsafe fn dump_object_tree_mut(&self)

Dumps a tree of children to the debug output.

Calls C++ function: void QObject::dumpObjectTree().

C++ documentation:

Dumps a tree of children to the debug output.

Note: before Qt 5.9, this function was not const.

See also dumpObjectInfo().

pub unsafe fn dump_object_tree(&self)

Dumps a tree of children to the debug output.

Calls C++ function: void QObject::dumpObjectTree() const.

C++ documentation:

Dumps a tree of children to the debug output.

Note: before Qt 5.9, this function was not const.

See also dumpObjectInfo().

pub unsafe fn dynamic_property_names(&self) -> CppBox<QListOfQByteArray>

Returns the names of all properties that were dynamically added to the object using setProperty().

Calls C++ function: QList<QByteArray> QObject::dynamicPropertyNames() const.

C++ documentation:

Returns the names of all properties that were dynamically added to the object using setProperty().

This function was introduced in Qt 4.2.

pub unsafe fn eq(&self, p: impl CastInto<Ref<QPointerOfQObject>>) -> bool

Returns true if c1 and c2 are the same Unicode character; otherwise returns false.

Calls C++ function: bool operator==(QObject* o, const QPointer<QObject>& p).

Warning: no exact match found in C++ documentation. Below is the C++ documentation for bool operator==(QChar c1, QChar c2):

Returns true if c1 and c2 are the same Unicode character; otherwise returns false.

pub unsafe fn event(&self, event: impl CastInto<Ptr<QEvent>>) -> bool

This virtual function receives events to an object and should return true if the event e was recognized and processed.

Calls C++ function: virtual bool QObject::event(QEvent* event).

C++ documentation:

This virtual function receives events to an object and should return true if the event e was recognized and processed.

The event() function can be reimplemented to customize the behavior of an object.

Make sure you call the parent event class implementation for all the events you did not handle.

Example:

class MyClass : public QWidget
{
      Q_OBJECT
public:
      MyClass(QWidget *parent = 0);
      ~MyClass();
      bool event(QEvent* ev)
      {
          if (ev->type() == QEvent::PolishRequest) {
              // overwrite handling of PolishRequest if any
              doThings();
              return true;
          } else  if (ev->type() == QEvent::Show) {
              // complement handling of Show if any
              doThings2();
              QWidget::event(ev);
              return true;
          }
          // Make sure the rest of events are handled
          return QWidget::event(ev);
      }
};

See also installEventFilter(), timerEvent(), QCoreApplication::sendEvent(), and QCoreApplication::postEvent().

pub unsafe fn event_filter( &self, watched: impl CastInto<Ptr<QObject>>, event: impl CastInto<Ptr<QEvent>> ) -> bool

Filters events if this object has been installed as an event filter for the watched object.

Calls C++ function: virtual bool QObject::eventFilter(QObject* watched, QEvent* event).

C++ documentation:

Filters events if this object has been installed as an event filter for the watched object.

In your reimplementation of this function, if you want to filter the event out, i.e. stop it being handled further, return true; otherwise return false.

Example:

class MainWindow : public QMainWindow
{
public:
      MainWindow();
protected:
      bool eventFilter(QObject obj, QEvent ev);
private:
      QTextEdit *textEdit;
};
MainWindow::MainWindow()
{
      textEdit = new QTextEdit;
      setCentralWidget(textEdit);
      textEdit->installEventFilter(this);
}
bool MainWindow::eventFilter(QObject obj, QEvent event)
{
      if (obj == textEdit) {
          if (event->type() == QEvent::KeyPress) {
              QKeyEvent keyEvent = static_cast<QKeyEvent>(event);
              qDebug() << “Ate key press” << keyEvent->key();
              return true;
          } else {
              return false;
          }
      } else {
          // pass the event on to the parent class
          return QMainWindow::eventFilter(obj, event);
      }
}

Notice in the example above that unhandled events are passed to the base class's eventFilter() function, since the base class might have reimplemented eventFilter() for its own internal purposes.

Warning: If you delete the receiver object in this function, be sure to return true. Otherwise, Qt will forward the event to the deleted object and the program might crash.

See also installEventFilter().

pub unsafe fn find_child_q_object_2a( &self, a_name: impl CastInto<Ref<QString>>, options: QFlags<FindChildOption> ) -> QPtr<QObject>

Returns the child of this object that can be cast into type T and that is called name, or 0 if there is no such object. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QObject* QObject::findChild<QObject*>(const QString& aName = …, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

Returns the child of this object that can be cast into type T and that is called name, or 0 if there is no such object. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

If there is more than one child matching the search, the most direct ancestor is returned. If there are several direct ancestors, it is undefined which one will be returned. In that case, findChildren() should be used.

This example returns a child QPushButton of parentWidget named "button1", even if the button isn't a direct child of the parent:

QPushButton button = parentWidget->findChild<QPushButton >(“button1”);

This example returns a QListWidget child of parentWidget:

QListWidget list = parentWidget->findChild<QListWidget >();

This example returns a child QPushButton of parentWidget (its direct parent) named "button1":

QPushButton button = parentWidget->findChild<QPushButton >(“button1”, Qt::FindDirectChildrenOnly);

This example returns a QListWidget child of parentWidget, its direct parent:

QListWidget list = parentWidget->findChild<QListWidget >(QString(), Qt::FindDirectChildrenOnly);

See also findChildren().

pub unsafe fn find_child_q_object_1a( &self, a_name: impl CastInto<Ref<QString>> ) -> QPtr<QObject>

Returns the child of this object that can be cast into type T and that is called name, or 0 if there is no such object. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QObject* QObject::findChild<QObject*>(const QString& aName = …) const.

C++ documentation:

Returns the child of this object that can be cast into type T and that is called name, or 0 if there is no such object. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

If there is more than one child matching the search, the most direct ancestor is returned. If there are several direct ancestors, it is undefined which one will be returned. In that case, findChildren() should be used.

This example returns a child QPushButton of parentWidget named "button1", even if the button isn't a direct child of the parent:

QPushButton button = parentWidget->findChild<QPushButton >(“button1”);

This example returns a QListWidget child of parentWidget:

QListWidget list = parentWidget->findChild<QListWidget >();

This example returns a child QPushButton of parentWidget (its direct parent) named "button1":

QPushButton button = parentWidget->findChild<QPushButton >(“button1”, Qt::FindDirectChildrenOnly);

This example returns a QListWidget child of parentWidget, its direct parent:

QListWidget list = parentWidget->findChild<QListWidget >(QString(), Qt::FindDirectChildrenOnly);

See also findChildren().

pub unsafe fn find_child_q_object_0a(&self) -> QPtr<QObject>

Returns the child of this object that can be cast into type T and that is called name, or 0 if there is no such object. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QObject* QObject::findChild<QObject*>() const.

C++ documentation:

Returns the child of this object that can be cast into type T and that is called name, or 0 if there is no such object. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

If there is more than one child matching the search, the most direct ancestor is returned. If there are several direct ancestors, it is undefined which one will be returned. In that case, findChildren() should be used.

This example returns a child QPushButton of parentWidget named "button1", even if the button isn't a direct child of the parent:

QPushButton button = parentWidget->findChild<QPushButton >(“button1”);

This example returns a QListWidget child of parentWidget:

QListWidget list = parentWidget->findChild<QListWidget >();

This example returns a child QPushButton of parentWidget (its direct parent) named "button1":

QPushButton button = parentWidget->findChild<QPushButton >(“button1”, Qt::FindDirectChildrenOnly);

This example returns a QListWidget child of parentWidget, its direct parent:

QListWidget list = parentWidget->findChild<QListWidget >(QString(), Qt::FindDirectChildrenOnly);

See also findChildren().

pub unsafe fn find_children_q_object_q_string_q_flags_find_child_option( &self, a_name: impl CastInto<Ref<QString>>, options: QFlags<FindChildOption> ) -> CppBox<QListOfQObject>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QObject*> QObject::findChildren<QObject*>(const QString& aName = …, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >(“widgetname”);

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_object_q_reg_exp_q_flags_find_child_option( &self, re: impl CastInto<Ref<QRegExp>>, options: QFlags<FindChildOption> ) -> CppBox<QListOfQObject>

This function overloads findChildren().

Calls C++ function: QList<QObject*> QObject::findChildren<QObject*>(const QRegExp& re, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression regExp, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

pub unsafe fn find_children_q_object_q_regular_expression_q_flags_find_child_option( &self, re: impl CastInto<Ref<QRegularExpression>>, options: QFlags<FindChildOption> ) -> CppBox<QListOfQObject>

This function overloads findChildren().

Calls C++ function: QList<QObject*> QObject::findChildren<QObject*>(const QRegularExpression& re, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression re, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

This function was introduced in Qt 5.0.

pub unsafe fn find_children_q_object_q_string( &self, a_name: impl CastInto<Ref<QString>> ) -> CppBox<QListOfQObject>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QObject*> QObject::findChildren<QObject*>(const QString& aName = …) const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >(“widgetname”);

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_object(&self) -> CppBox<QListOfQObject>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QObject*> QObject::findChildren<QObject*>() const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >(“widgetname”);

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_object_q_reg_exp( &self, re: impl CastInto<Ref<QRegExp>> ) -> CppBox<QListOfQObject>

This function overloads findChildren().

Calls C++ function: QList<QObject*> QObject::findChildren<QObject*>(const QRegExp& re) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression regExp, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

pub unsafe fn find_children_q_object_q_regular_expression( &self, re: impl CastInto<Ref<QRegularExpression>> ) -> CppBox<QListOfQObject>

This function overloads findChildren().

Calls C++ function: QList<QObject*> QObject::findChildren<QObject*>(const QRegularExpression& re) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression re, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

This function was introduced in Qt 5.0.

pub unsafe fn inherits(&self, classname: *const i8) -> bool

Returns true if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns false.

Calls C++ function: bool QObject::inherits(const char* classname) const.

C++ documentation:

Returns true if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns false.

A class is considered to inherit itself.

Example:

QTimer *timer = new QTimer;         // QTimer inherits QObject
timer->inherits(“QTimer”);          // returns true
timer->inherits(“QObject”);         // returns true
timer->inherits(“QAbstractButton”); // returns false
// QVBoxLayout inherits QObject and QLayoutItem
QVBoxLayout *layout = new QVBoxLayout;
layout->inherits(“QObject”);        // returns true
layout->inherits(“QLayoutItem”);    // returns true (even though QLayoutItem is not a QObject)

If you need to determine whether an object is an instance of a particular class for the purpose of casting it, consider using qobject_cast<Type *>(object) instead.

See also metaObject() and qobject_cast().

pub unsafe fn install_event_filter( &self, filter_obj: impl CastInto<Ptr<QObject>> )

Installs an event filter filterObj on this object. For example:

Calls C++ function: void QObject::installEventFilter(QObject* filterObj).

C++ documentation:

Installs an event filter filterObj on this object. For example:

  monitoredObj->installEventFilter(filterObj);

An event filter is an object that receives all events that are sent to this object. The filter can either stop the event or forward it to this object. The event filter filterObj receives events via its eventFilter() function. The eventFilter() function must return true if the event should be filtered, (i.e. stopped); otherwise it must return false.

If multiple event filters are installed on a single object, the filter that was installed last is activated first.

Here's a KeyPressEater class that eats the key presses of its monitored objects:

class KeyPressEater : public QObject
{
      Q_OBJECT
      ...
protected:
      bool eventFilter(QObject obj, QEvent event);
};
bool KeyPressEater::eventFilter(QObject obj, QEvent event)
{
      if (event->type() == QEvent::KeyPress) {
          QKeyEvent keyEvent = static_cast<QKeyEvent >(event);
          qDebug(“Ate key press %d”, keyEvent->key());
          return true;
      } else {
          // standard event processing
          return QObject::eventFilter(obj, event);
      }
}

And here's how to install it on two widgets:

KeyPressEater keyPressEater = new KeyPressEater(this);
QPushButton pushButton = new QPushButton(this);
QListView *listView = new QListView(this);
pushButton->installEventFilter(keyPressEater);
listView->installEventFilter(keyPressEater);

The QShortcut class, for example, uses this technique to intercept shortcut key presses.

Warning: If you delete the receiver object in your eventFilter() function, be sure to return true. If you return false, Qt sends the event to the deleted object and the program will crash.

Note that the filtering object must be in the same thread as this object. If filterObj is in a different thread, this function does nothing. If either filterObj or this object are moved to a different thread after calling this function, the event filter will not be called until both objects have the same thread affinity again (it is not removed).

See also removeEventFilter(), eventFilter(), and event().

pub unsafe fn is_widget_type(&self) -> bool

Returns true if the object is a widget; otherwise returns false.

Calls C++ function: bool QObject::isWidgetType() const.

C++ documentation:

Returns true if the object is a widget; otherwise returns false.

Calling this function is equivalent to calling inherits("QWidget"), except that it is much faster.

pub unsafe fn is_window_type(&self) -> bool

Returns true if the object is a window; otherwise returns false.

Calls C++ function: bool QObject::isWindowType() const.

C++ documentation:

Returns true if the object is a window; otherwise returns false.

Calling this function is equivalent to calling inherits("QWindow"), except that it is much faster.

pub unsafe fn kill_timer(&self, id: i32)

Kills the timer with timer identifier, id.

Calls C++ function: void QObject::killTimer(int id).

C++ documentation:

Kills the timer with timer identifier, id.

The timer identifier is returned by startTimer() when a timer event is started.

See also timerEvent() and startTimer().

pub unsafe fn meta_object(&self) -> Ptr<QMetaObject>

Returns a pointer to the meta-object of this object.

Calls C++ function: virtual const QMetaObject* QObject::metaObject() const.

C++ documentation:

Returns a pointer to the meta-object of this object.

A meta-object contains information about a class that inherits QObject, e.g. class name, superclass name, properties, signals and slots. Every QObject subclass that contains the Q_OBJECT macro will have a meta-object.

The meta-object information is required by the signal/slot connection mechanism and the property system. The inherits() function also makes use of the meta-object.

If you have no pointer to an actual object instance but still want to access the meta-object of a class, you can use staticMetaObject.

Example:

QObject *obj = new QPushButton;
obj->metaObject()->className();             // returns “QPushButton”
QPushButton::staticMetaObject.className();  // returns “QPushButton”

See also staticMetaObject.

pub unsafe fn move_to_thread(&self, thread: impl CastInto<Ptr<QThread>>)

Changes the thread affinity for this object and its children. The object cannot be moved if it has a parent. Event processing will continue in the targetThread.

Calls C++ function: void QObject::moveToThread(QThread* thread).

C++ documentation:

Changes the thread affinity for this object and its children. The object cannot be moved if it has a parent. Event processing will continue in the targetThread.

To move an object to the main thread, use QApplication::instance() to retrieve a pointer to the current application, and then use QApplication::thread() to retrieve the thread in which the application lives. For example:

myObject->moveToThread(QApplication::instance()->thread());

If targetThread is zero, all event processing for this object and its children stops.

Note that all active timers for the object will be reset. The timers are first stopped in the current thread and restarted (with the same interval) in the targetThread. As a result, constantly moving an object between threads can postpone timer events indefinitely.

A QEvent::ThreadChange event is sent to this object just before the thread affinity is changed. You can handle this event to perform any special processing. Note that any new events that are posted to this object will be handled in the targetThread.

Warning: This function is not thread-safe; the current thread must be same as the current thread affinity. In other words, this function can only "push" an object from the current thread to another thread, it cannot "pull" an object from any arbitrary thread to the current thread.

See also thread().

pub unsafe fn object_name(&self) -> CppBox<QString>

This property holds the name of this object

Calls C++ function: QString QObject::objectName() const.

C++ documentation:

This property holds the name of this object

You can find an object by name (and type) using findChild(). You can find a set of objects with findChildren().

qDebug(“MyClass::setPrecision(): (%s) invalid precision %f”,
         qPrintable(objectName()), newPrecision);

By default, this property contains an empty string.

Access functions:

QString	objectName() const
void	setObjectName(const QString &name)

Notifier signal:

void

objectNameChanged(const QString &objectName)

[see note below]

Note: This is a private signal. It can be used in signal connections but cannot be emitted by the user.

See also metaObject() and QMetaObject::className().

pub unsafe fn parent(&self) -> QPtr<QObject>

Returns a pointer to the parent object.

Calls C++ function: QObject* QObject::parent() const.

C++ documentation:

Returns a pointer to the parent object.

See also setParent() and children().

pub unsafe fn property(&self, name: *const i8) -> CppBox<QVariant>

Returns the value of the object's name property.

Calls C++ function: QVariant QObject::property(const char* name) const.

C++ documentation:

Returns the value of the object’s name property.

If no such property exists, the returned variant is invalid.

Information about all available properties is provided through the metaObject() and dynamicPropertyNames().

See also setProperty(), QVariant::isValid(), metaObject(), and dynamicPropertyNames().

pub unsafe fn qt_metacall( &self, arg1: Call, arg2: i32, arg3: *mut *mut c_void ) -> i32

Calls C++ function: virtual int QObject::qt_metacall(QMetaObject::Call arg1, int arg2, void** arg3).

pub unsafe fn qt_metacast(&self, arg1: *const i8) -> *mut c_void

Calls C++ function: virtual void* QObject::qt_metacast(const char* arg1).

pub unsafe fn remove_event_filter(&self, obj: impl CastInto<Ptr<QObject>>)

Removes an event filter object obj from this object. The request is ignored if such an event filter has not been installed.

Calls C++ function: void QObject::removeEventFilter(QObject* obj).

C++ documentation:

Removes an event filter object obj from this object. The request is ignored if such an event filter has not been installed.

All event filters for this object are automatically removed when this object is destroyed.

It is always safe to remove an event filter, even during event filter activation (i.e. from the eventFilter() function).

See also installEventFilter(), eventFilter(), and event().

pub unsafe fn set_object_name(&self, name: impl CastInto<Ref<QString>>)

This property holds the name of this object

Calls C++ function: void QObject::setObjectName(const QString& name).

C++ documentation:

This property holds the name of this object

You can find an object by name (and type) using findChild(). You can find a set of objects with findChildren().

qDebug(“MyClass::setPrecision(): (%s) invalid precision %f”,
         qPrintable(objectName()), newPrecision);

By default, this property contains an empty string.

Access functions:

QString	objectName() const
void	setObjectName(const QString &name)

Notifier signal:

void

objectNameChanged(const QString &objectName)

[see note below]

Note: This is a private signal. It can be used in signal connections but cannot be emitted by the user.

See also metaObject() and QMetaObject::className().

pub unsafe fn set_parent(&self, parent: impl CastInto<Ptr<QObject>>)

Makes the object a child of parent.

Calls C++ function: void QObject::setParent(QObject* parent).

C++ documentation:

Makes the object a child of parent.

See also parent() and children().

pub unsafe fn set_property( &self, name: *const i8, value: impl CastInto<Ref<QVariant>> ) -> bool

Sets the value of the object's name property to value.

Calls C++ function: bool QObject::setProperty(const char* name, const QVariant& value).

C++ documentation:

Sets the value of the object’s name property to value.

If the property is defined in the class using Q_PROPERTY then true is returned on success and false otherwise. If the property is not defined using Q_PROPERTY, and therefore not listed in the meta-object, it is added as a dynamic property and false is returned.

Information about all available properties is provided through the metaObject() and dynamicPropertyNames().

Dynamic properties can be queried again using property() and can be removed by setting the property value to an invalid QVariant. Changing the value of a dynamic property causes a QDynamicPropertyChangeEvent to be sent to the object.

Note: Dynamic properties starting with "_q_" are reserved for internal purposes.

See also property(), metaObject(), dynamicPropertyNames(), and QMetaProperty::write().

pub unsafe fn signals_blocked(&self) -> bool

Returns true if signals are blocked; otherwise returns false.

Calls C++ function: bool QObject::signalsBlocked() const.

C++ documentation:

Returns true if signals are blocked; otherwise returns false.

Signals are not blocked by default.

See also blockSignals() and QSignalBlocker.

pub unsafe fn start_timer_2a(&self, interval: i32, timer_type: TimerType) -> i32

Starts a timer and returns a timer identifier, or returns zero if it could not start a timer.

Calls C++ function: int QObject::startTimer(int interval, Qt::TimerType timerType = …).

C++ documentation:

Starts a timer and returns a timer identifier, or returns zero if it could not start a timer.

A timer event will occur every interval milliseconds until killTimer() is called. If interval is 0, then the timer event occurs once every time there are no more window system events to process.

The virtual timerEvent() function is called with the QTimerEvent event parameter class when a timer event occurs. Reimplement this function to get timer events.

If multiple timers are running, the QTimerEvent::timerId() can be used to find out which timer was activated.

Example:

class MyObject : public QObject
{
      Q_OBJECT
public:
      MyObject(QObject *parent = 0);
protected:
      void timerEvent(QTimerEvent *event);
};
MyObject::MyObject(QObject *parent)
      : QObject(parent)
{
      startTimer(50);     // 50-millisecond timer
      startTimer(1000);   // 1-second timer
      startTimer(60000);  // 1-minute timer
      using namespace std::chrono;
      startTimer(milliseconds(50));
      startTimer(seconds(1));
      startTimer(minutes(1));
      // since C++14 we can use std::chrono::duration literals, e.g.:
      startTimer(100ms);
      startTimer(5s);
      startTimer(2min);
      startTimer(1h);
}
void MyObject::timerEvent(QTimerEvent *event)
{
      qDebug() << “Timer ID:” << event->timerId();
}

Note that QTimer's accuracy depends on the underlying operating system and hardware. The timerType argument allows you to customize the accuracy of the timer. See Qt::TimerType for information on the different timer types. Most platforms support an accuracy of 20 milliseconds; some provide more. If Qt is unable to deliver the requested number of timer events, it will silently discard some.

The QTimer class provides a high-level programming interface with single-shot timers and timer signals instead of events. There is also a QBasicTimer class that is more lightweight than QTimer and less clumsy than using timer IDs directly.

See also timerEvent(), killTimer(), and QTimer::singleShot().

pub unsafe fn start_timer_1a(&self, interval: i32) -> i32

Starts a timer and returns a timer identifier, or returns zero if it could not start a timer.

Calls C++ function: int QObject::startTimer(int interval).

C++ documentation:

Starts a timer and returns a timer identifier, or returns zero if it could not start a timer.

A timer event will occur every interval milliseconds until killTimer() is called. If interval is 0, then the timer event occurs once every time there are no more window system events to process.

The virtual timerEvent() function is called with the QTimerEvent event parameter class when a timer event occurs. Reimplement this function to get timer events.

If multiple timers are running, the QTimerEvent::timerId() can be used to find out which timer was activated.

Example:

class MyObject : public QObject
{
      Q_OBJECT
public:
      MyObject(QObject *parent = 0);
protected:
      void timerEvent(QTimerEvent *event);
};
MyObject::MyObject(QObject *parent)
      : QObject(parent)
{
      startTimer(50);     // 50-millisecond timer
      startTimer(1000);   // 1-second timer
      startTimer(60000);  // 1-minute timer
      using namespace std::chrono;
      startTimer(milliseconds(50));
      startTimer(seconds(1));
      startTimer(minutes(1));
      // since C++14 we can use std::chrono::duration literals, e.g.:
      startTimer(100ms);
      startTimer(5s);
      startTimer(2min);
      startTimer(1h);
}
void MyObject::timerEvent(QTimerEvent *event)
{
      qDebug() << “Timer ID:” << event->timerId();
}

Note that QTimer's accuracy depends on the underlying operating system and hardware. The timerType argument allows you to customize the accuracy of the timer. See Qt::TimerType for information on the different timer types. Most platforms support an accuracy of 20 milliseconds; some provide more. If Qt is unable to deliver the requested number of timer events, it will silently discard some.

The QTimer class provides a high-level programming interface with single-shot timers and timer signals instead of events. There is also a QBasicTimer class that is more lightweight than QTimer and less clumsy than using timer IDs directly.

See also timerEvent(), killTimer(), and QTimer::singleShot().

pub unsafe fn thread(&self) -> QPtr<QThread>

Returns the thread in which the object lives.

Calls C++ function: QThread* QObject::thread() const.

C++ documentation:

Returns the thread in which the object lives.

See also moveToThread().

Trait Implementations

impl CppDeletable for QDrag

unsafe fn delete(&self)

Destroys the drag object.

Calls C++ function: virtual [destructor] void QDrag::~QDrag().

C++ documentation:

Destroys the drag object.

impl Deref for QDrag

fn deref(&self) -> &QObject

Calls C++ function: QObject* static_cast<QObject*>(QDrag* ptr).

type Target = QObject

The resulting type after dereferencing.

impl DynamicCast<QDrag> for QObject

unsafe fn dynamic_cast(ptr: Ptr<QObject>) -> Ptr<QDrag>

Calls C++ function: QDrag* dynamic_cast<QDrag*>(QObject* ptr).

impl StaticDowncast<QDrag> for QObject

unsafe fn static_downcast(ptr: Ptr<QObject>) -> Ptr<QDrag>

Calls C++ function: QDrag* static_cast<QDrag*>(QObject* ptr).

impl StaticUpcast<QObject> for QDrag

unsafe fn static_upcast(ptr: Ptr<QDrag>) -> Ptr<QObject>

Calls C++ function: QObject* static_cast<QObject*>(QDrag* ptr).