Struct qt_core::QTimer

#[repr(C)]
pub struct QTimer { /* fields omitted */ }

The QTimer class provides repetitive and single-shot timers.

C++ class: QTimer.

C++ documentation:

The QTimer class provides repetitive and single-shot timers.

The QTimer class provides a high-level programming interface for timers. To use it, create a QTimer, connect its timeout() signal to the appropriate slots, and call start(). From then on, it will emit the timeout() signal at constant intervals.

Example for a one second (1000 millisecond) timer (from the Analog Clock example):

      QTimer *timer = new QTimer(this);
      connect(timer, SIGNAL(timeout()), this, SLOT(update()));
      timer->start(1000);

From then on, the update() slot is called every second.

You can set a timer to time out only once by calling setSingleShot(true). You can also use the static QTimer::singleShot() function to call a slot after a specified interval:

      QTimer::singleShot(200, this, SLOT(updateCaption()));

In multithreaded applications, you can use QTimer in any thread that has an event loop. To start an event loop from a non-GUI thread, use QThread::exec(). Qt uses the timer's thread affinity to determine which thread will emit the timeout() signal. Because of this, you must start and stop the timer in its thread; it is not possible to start a timer from another thread.

As a special case, a QTimer with a timeout of 0 will time out as soon as all the events in the window system's event queue have been processed. This can be used to do heavy work while providing a snappy user interface:

      QTimer *timer = new QTimer(this);
      connect(timer, SIGNAL(timeout()), this, SLOT(processOneThing()));
      timer->start();

From then on, processOneThing() will be called repeatedly. It should be written in such a way that it always returns quickly (typically after processing one data item) so that Qt can deliver events to the user interface and stop the timer as soon as it has done all its work. This is the traditional way of implementing heavy work in GUI applications, but as multithreading is nowadays becoming available on more and more platforms, we expect that zero-millisecond QTimer objects will gradually be replaced by QThreads.

Methods

impl QTimer

pub fn slot_start(&self) -> Receiver<(c_int,)>

Starts or restarts the timer with a timeout interval of msec milliseconds.

Returns a built-in Qt slot QTimer::start that can be passed to qt_core::Signal::connect.

C++ documentation:

Starts or restarts the timer with a timeout interval of msec milliseconds.

If the timer is already running, it will be stopped and restarted.

If singleShot is true, the timer will be activated only once.

pub fn slot_start2(&self) -> Receiver<()>

This function overloads start().

Returns a built-in Qt slot QTimer::start that can be passed to qt_core::Signal::connect.

C++ documentation:

This function overloads start().

Starts or restarts the timer with the timeout specified in interval.

If the timer is already running, it will be stopped and restarted.

If singleShot is true, the timer will be activated only once.

pub fn slot_stop(&self) -> Receiver<()>

Stops the timer.

Returns a built-in Qt slot QTimer::stop that can be passed to qt_core::Signal::connect.

C++ documentation:

Stops the timer.

See also start().

pub fn timeout(&self) -> Signal<()>

This signal is emitted when the timer times out.

Returns a built-in Qt signal QTimer::timeout that can be passed to qt_core::Signal::connect.

C++ documentation:

This signal is emitted when the timer times out.

Note: This is a private signal. It can be used in signal connections but cannot be emitted by the user.

See also interval, start(), and stop().

pub unsafe fn interval(&self) -> c_int

This property holds the timeout interval in milliseconds

Calls C++ function: int QTimer::interval() const.

C++ documentation:

This property holds the timeout interval in milliseconds

The default value for this property is 0. A QTimer with a timeout interval of 0 will time out as soon as all the events in the window system's event queue have been processed.

Setting the interval of an active timer changes its timerId().

Access functions:

int	interval() const
void	setInterval(int msec)
void	setInterval(std::chrono::milliseconds value)

See also singleShot.

pub unsafe fn is_active(&self) -> bool

Returns true if the timer is running (pending); otherwise returns false.

Calls C++ function: bool QTimer::isActive() const.

C++ documentation:

Returns true if the timer is running (pending); otherwise returns false.

Note: Getter function for property active.

pub unsafe fn is_single_shot(&self) -> bool

This property holds whether the timer is a single-shot timer

Calls C++ function: bool QTimer::isSingleShot() const.

C++ documentation:

This property holds whether the timer is a single-shot timer

A single-shot timer fires only once, non-single-shot timers fire every interval milliseconds.

The default value for this property is false.

Access functions:

bool	isSingleShot() const
void	setSingleShot(bool singleShot)

See also interval and singleShot().

pub unsafe fn meta_object(&self) -> Ptr<QMetaObject>

Calls C++ function: virtual const QMetaObject* QTimer::metaObject() const.

pub unsafe fn new_1a(parent: impl CastInto<MutPtr<QObject>>) -> CppBox<QTimer>

Constructs a timer with the given parent.

Calls C++ function: [constructor] void QTimer::QTimer(QObject* parent = …).

C++ documentation:

Constructs a timer with the given parent.

pub unsafe fn new_0a() -> CppBox<QTimer>

The QTimer class provides repetitive and single-shot timers.

Calls C++ function: [constructor] void QTimer::QTimer().

C++ documentation:

The QTimer class provides repetitive and single-shot timers.

The QTimer class provides a high-level programming interface for timers. To use it, create a QTimer, connect its timeout() signal to the appropriate slots, and call start(). From then on, it will emit the timeout() signal at constant intervals.

Example for a one second (1000 millisecond) timer (from the Analog Clock example):

      QTimer *timer = new QTimer(this);
      connect(timer, SIGNAL(timeout()), this, SLOT(update()));
      timer->start(1000);

From then on, the update() slot is called every second.

You can set a timer to time out only once by calling setSingleShot(true). You can also use the static QTimer::singleShot() function to call a slot after a specified interval:

      QTimer::singleShot(200, this, SLOT(updateCaption()));

In multithreaded applications, you can use QTimer in any thread that has an event loop. To start an event loop from a non-GUI thread, use QThread::exec(). Qt uses the timer's thread affinity to determine which thread will emit the timeout() signal. Because of this, you must start and stop the timer in its thread; it is not possible to start a timer from another thread.

As a special case, a QTimer with a timeout of 0 will time out as soon as all the events in the window system's event queue have been processed. This can be used to do heavy work while providing a snappy user interface:

      QTimer *timer = new QTimer(this);
      connect(timer, SIGNAL(timeout()), this, SLOT(processOneThing()));
      timer->start();

From then on, processOneThing() will be called repeatedly. It should be written in such a way that it always returns quickly (typically after processing one data item) so that Qt can deliver events to the user interface and stop the timer as soon as it has done all its work. This is the traditional way of implementing heavy work in GUI applications, but as multithreading is nowadays becoming available on more and more platforms, we expect that zero-millisecond QTimer objects will gradually be replaced by QThreads.

pub unsafe fn qt_metacall(
    &mut self,
    arg1: Call,
    arg2: c_int,
    arg3: impl CastInto<MutPtr<*mut c_void>>
) -> c_int

Calls C++ function: virtual int QTimer::qt_metacall(QMetaObject::Call arg1, int arg2, void** arg3).

pub unsafe fn qt_metacast(
    &mut self,
    arg1: impl CastInto<Ptr<c_char>>
) -> MutPtr<c_void>

Calls C++ function: virtual void* QTimer::qt_metacast(const char* arg1).

pub unsafe fn remaining_time(&self) -> c_int

This property holds the remaining time in milliseconds

Calls C++ function: int QTimer::remainingTime() const.

C++ documentation:

This property holds the remaining time in milliseconds

Returns the timer's remaining value in milliseconds left until the timeout. If the timer is inactive, the returned value will be -1. If the timer is overdue, the returned value will be 0.

This property was introduced in Qt 5.0.

Access functions:

int	remainingTime() const

See also interval.

pub unsafe fn set_interval(&mut self, msec: c_int)

This property holds the timeout interval in milliseconds

Calls C++ function: void QTimer::setInterval(int msec).

C++ documentation:

This property holds the timeout interval in milliseconds

The default value for this property is 0. A QTimer with a timeout interval of 0 will time out as soon as all the events in the window system's event queue have been processed.

Setting the interval of an active timer changes its timerId().

Access functions:

int	interval() const
void	setInterval(int msec)
void	setInterval(std::chrono::milliseconds value)

See also singleShot.

pub unsafe fn set_single_shot(&mut self, single_shot: bool)

This property holds whether the timer is a single-shot timer

Calls C++ function: void QTimer::setSingleShot(bool singleShot).

C++ documentation:

This property holds whether the timer is a single-shot timer

A single-shot timer fires only once, non-single-shot timers fire every interval milliseconds.

The default value for this property is false.

Access functions:

bool	isSingleShot() const
void	setSingleShot(bool singleShot)

See also interval and singleShot().

pub unsafe fn set_timer_type(&mut self, atype: TimerType)

controls the accuracy of the timer

Calls C++ function: void QTimer::setTimerType(Qt::TimerType atype).

C++ documentation:

controls the accuracy of the timer

The default value for this property is Qt::CoarseTimer.

Access functions:

Qt::TimerType	timerType() const
void	setTimerType(Qt::TimerType atype)

See also Qt::TimerType.

pub unsafe fn single_shot_3a(
    msec: c_int,
    receiver: impl CastInto<Ptr<QObject>>,
    member: impl CastInto<Ptr<c_char>>
)

This static function calls a slot after a given time interval.

Calls C++ function: static void QTimer::singleShot(int msec, const QObject* receiver, const char* member).

C++ documentation:

This static function calls a slot after a given time interval.

It is very convenient to use this function because you do not need to bother with a timerEvent or create a local QTimer object.

Example:

#include <QApplication>
#include <QTimer>
int main(int argc, char *argv[])
{
      QApplication app(argc, argv);
      QTimer::singleShot(600000, &app, SLOT(quit()));
      ...
      return app.exec();
}

This sample program automatically terminates after 10 minutes (600,000 milliseconds).

The receiver is the receiving object and the member is the slot. The time interval is msec milliseconds.

Note: This function is reentrant.

See also setSingleShot() and start().

pub unsafe fn single_shot_4a(
    msec: c_int,
    timer_type: TimerType,
    receiver: impl CastInto<Ptr<QObject>>,
    member: impl CastInto<Ptr<c_char>>
)

This is an overloaded function.

Calls C++ function: static void QTimer::singleShot(int msec, Qt::TimerType timerType, const QObject* receiver, const char* member).

C++ documentation:

This is an overloaded function.

This static function calls a slot after a given time interval.

It is very convenient to use this function because you do not need to bother with a timerEvent or create a local QTimer object.

The receiver is the receiving object and the member is the slot. The time interval is msec milliseconds. The timerType affects the accuracy of the timer.

Note: This function is reentrant.

See also start().

pub unsafe fn start_1a(&mut self, msec: c_int)

Starts or restarts the timer with a timeout interval of msec milliseconds.

Calls C++ function: [slot] void QTimer::start(int msec).

C++ documentation:

Starts or restarts the timer with a timeout interval of msec milliseconds.

If the timer is already running, it will be stopped and restarted.

If singleShot is true, the timer will be activated only once.

pub unsafe fn start_0a(&mut self)

This function overloads start().

Calls C++ function: [slot] void QTimer::start().

C++ documentation:

This function overloads start().

Starts or restarts the timer with the timeout specified in interval.

If the timer is already running, it will be stopped and restarted.

If singleShot is true, the timer will be activated only once.

pub unsafe fn static_meta_object() -> Ref<QMetaObject>

Returns a reference to the staticMetaObject field.

pub unsafe fn stop(&mut self)

Stops the timer.

Calls C++ function: [slot] void QTimer::stop().

C++ documentation:

Stops the timer.

See also start().

pub unsafe fn timer_id(&self) -> c_int

Returns the ID of the timer if the timer is running; otherwise returns -1.

Calls C++ function: int QTimer::timerId() const.

C++ documentation:

Returns the ID of the timer if the timer is running; otherwise returns -1.

pub unsafe fn timer_type(&self) -> TimerType

controls the accuracy of the timer

Calls C++ function: Qt::TimerType QTimer::timerType() const.

C++ documentation:

controls the accuracy of the timer

The default value for this property is Qt::CoarseTimer.

Access functions:

Qt::TimerType	timerType() const
void	setTimerType(Qt::TimerType atype)

See also Qt::TimerType.

pub unsafe fn tr(
    s: impl CastInto<Ptr<c_char>>,
    c: impl CastInto<Ptr<c_char>>,
    n: c_int
) -> CppBox<QString>

Calls C++ function: static QString QTimer::tr(const char* s, const char* c, int n).

pub unsafe fn tr_utf8(
    s: impl CastInto<Ptr<c_char>>,
    c: impl CastInto<Ptr<c_char>>,
    n: c_int
) -> CppBox<QString>

Calls C++ function: static QString QTimer::trUtf8(const char* s, const char* c, int n).

Methods from Deref<Target = QObject>

pub fn destroyed(&self) -> Signal<(*mut QObject,)>

This signal is emitted immediately before the object obj is destroyed, and can not be blocked.

Returns a built-in Qt signal QObject::destroyed that can be passed to qt_core::Signal::connect.

C++ documentation:

This signal is emitted immediately before the object obj is destroyed, and can not be blocked.

All the objects's children are destroyed immediately after this signal is emitted.

See also deleteLater() and QPointer.

pub fn object_name_changed(&self) -> Signal<(*const QString,)>

This signal is emitted after the object's name has been changed. The new object name is passed as objectName.

Returns a built-in Qt signal QObject::objectNameChanged that can be passed to qt_core::Signal::connect.

C++ documentation:

This signal is emitted after the object's name has been changed. The new object name is passed as objectName.

Note: This is a private signal. It can be used in signal connections but cannot be emitted by the user.

Note: Notifier signal for property objectName.

See also QObject::objectName.

pub fn slot_delete_later(&self) -> Receiver<()>

Schedules this object for deletion.

Returns a built-in Qt slot QObject::deleteLater that can be passed to qt_core::Signal::connect.

C++ documentation:

Schedules this object for deletion.

The object will be deleted when control returns to the event loop. If the event loop is not running when this function is called (e.g. deleteLater() is called on an object before QCoreApplication::exec()), the object will be deleted once the event loop is started. If deleteLater() is called after the main event loop has stopped, the object will not be deleted. Since Qt 4.8, if deleteLater() is called on an object that lives in a thread with no running event loop, the object will be destroyed when the thread finishes.

Note that entering and leaving a new event loop (e.g., by opening a modal dialog) will not perform the deferred deletion; for the object to be deleted, the control must return to the event loop from which deleteLater() was called.

Note: It is safe to call this function more than once; when the first deferred deletion event is delivered, any pending events for the object are removed from the event queue.

See also destroyed() and QPointer.

pub unsafe fn block_signals(&mut self, b: bool) -> bool

If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it). If block is false, no such blocking will occur.

Calls C++ function: bool QObject::blockSignals(bool b).

C++ documentation:

If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it). If block is false, no such blocking will occur.

The return value is the previous value of signalsBlocked().

Note that the destroyed() signal will be emitted even if the signals for this object have been blocked.

Signals emitted while being blocked are not buffered.

See also signalsBlocked() and QSignalBlocker.

pub unsafe fn children(&self) -> Ref<QListOfQObject>

Returns a list of child objects. The QObjectList class is defined in the <QObject> header file as the following:

Calls C++ function: const QList<QObject*>& QObject::children() const.

C++ documentation:

Returns a list of child objects. The QObjectList class is defined in the <QObject> header file as the following:

  typedef QList<QObject*> QObjectList;

The first child added is the first object in the list and the last child added is the last object in the list, i.e. new children are appended at the end.

Note that the list order changes when QWidget children are raised or lowered. A widget that is raised becomes the last object in the list, and a widget that is lowered becomes the first object in the list.

See also findChild(), findChildren(), parent(), and setParent().

pub unsafe fn delete_later(&mut self)

Schedules this object for deletion.

Calls C++ function: [slot] void QObject::deleteLater().

C++ documentation:

Schedules this object for deletion.

The object will be deleted when control returns to the event loop. If the event loop is not running when this function is called (e.g. deleteLater() is called on an object before QCoreApplication::exec()), the object will be deleted once the event loop is started. If deleteLater() is called after the main event loop has stopped, the object will not be deleted. Since Qt 4.8, if deleteLater() is called on an object that lives in a thread with no running event loop, the object will be destroyed when the thread finishes.

Note that entering and leaving a new event loop (e.g., by opening a modal dialog) will not perform the deferred deletion; for the object to be deleted, the control must return to the event loop from which deleteLater() was called.

Note: It is safe to call this function more than once; when the first deferred deletion event is delivered, any pending events for the object are removed from the event queue.

See also destroyed() and QPointer.

pub unsafe fn disconnect_char_q_object_char(
    &self,
    signal: impl CastInto<Ptr<c_char>>,
    receiver: impl CastInto<Ptr<QObject>>,
    member: impl CastInto<Ptr<c_char>>
) -> bool

This function overloads disconnect().

Calls C++ function: bool QObject::disconnect(const char* signal = …, const QObject* receiver = …, const char* member = …) const.

C++ documentation:

This function overloads disconnect().

Disconnects signal from method of receiver.

A signal-slot connection is removed when either of the objects involved are destroyed.

Note: This function is thread-safe.

pub unsafe fn disconnect_q_object_char(
    &self,
    receiver: impl CastInto<Ptr<QObject>>,
    member: impl CastInto<Ptr<c_char>>
) -> bool

This function overloads disconnect().

Calls C++ function: bool QObject::disconnect(const QObject* receiver, const char* member = …) const.

C++ documentation:

This function overloads disconnect().

Disconnects all signals in this object from receiver's method.

A signal-slot connection is removed when either of the objects involved are destroyed.

pub unsafe fn disconnect_char_q_object(
    &self,
    signal: impl CastInto<Ptr<c_char>>,
    receiver: impl CastInto<Ptr<QObject>>
) -> bool

This function overloads disconnect().

Calls C++ function: bool QObject::disconnect(const char* signal = …, const QObject* receiver = …) const.

C++ documentation:

This function overloads disconnect().

Disconnects signal from method of receiver.

A signal-slot connection is removed when either of the objects involved are destroyed.

Note: This function is thread-safe.

pub unsafe fn disconnect_char(&self, signal: impl CastInto<Ptr<c_char>>) -> bool

This function overloads disconnect().

Calls C++ function: bool QObject::disconnect(const char* signal = …) const.

C++ documentation:

This function overloads disconnect().

Disconnects signal from method of receiver.

A signal-slot connection is removed when either of the objects involved are destroyed.

Note: This function is thread-safe.

pub unsafe fn disconnect(&self) -> bool

This function overloads disconnect().

Calls C++ function: bool QObject::disconnect() const.

C++ documentation:

This function overloads disconnect().

Disconnects signal from method of receiver.

A signal-slot connection is removed when either of the objects involved are destroyed.

Note: This function is thread-safe.

pub unsafe fn disconnect_q_object(
    &self,
    receiver: impl CastInto<Ptr<QObject>>
) -> bool

This function overloads disconnect().

Calls C++ function: bool QObject::disconnect(const QObject* receiver) const.

C++ documentation:

This function overloads disconnect().

Disconnects all signals in this object from receiver's method.

A signal-slot connection is removed when either of the objects involved are destroyed.

pub unsafe fn dump_object_info_mut(&mut self)

Dumps information about signal connections, etc. for this object to the debug output.

Calls C++ function: void QObject::dumpObjectInfo().

C++ documentation:

Dumps information about signal connections, etc. for this object to the debug output.

Note: before Qt 5.9, this function was not const.

See also dumpObjectTree().

pub unsafe fn dump_object_info(&self)

Dumps information about signal connections, etc. for this object to the debug output.

Calls C++ function: void QObject::dumpObjectInfo() const.

C++ documentation:

Dumps information about signal connections, etc. for this object to the debug output.

Note: before Qt 5.9, this function was not const.

See also dumpObjectTree().

pub unsafe fn dump_object_tree_mut(&mut self)

Dumps a tree of children to the debug output.

Calls C++ function: void QObject::dumpObjectTree().

C++ documentation:

Dumps a tree of children to the debug output.

Note: before Qt 5.9, this function was not const.

See also dumpObjectInfo().

pub unsafe fn dump_object_tree(&self)

Dumps a tree of children to the debug output.

Calls C++ function: void QObject::dumpObjectTree() const.

C++ documentation:

Dumps a tree of children to the debug output.

Note: before Qt 5.9, this function was not const.

See also dumpObjectInfo().

pub unsafe fn dynamic_property_names(&self) -> CppBox<QListOfQByteArray>

Returns the names of all properties that were dynamically added to the object using setProperty().

Calls C++ function: QList<QByteArray> QObject::dynamicPropertyNames() const.

C++ documentation:

Returns the names of all properties that were dynamically added to the object using setProperty().

This function was introduced in Qt 4.2.

pub unsafe fn event(&mut self, event: impl CastInto<MutPtr<QEvent>>) -> bool

This virtual function receives events to an object and should return true if the event e was recognized and processed.

Calls C++ function: virtual bool QObject::event(QEvent* event).

C++ documentation:

This virtual function receives events to an object and should return true if the event e was recognized and processed.

The event() function can be reimplemented to customize the behavior of an object.

Make sure you call the parent event class implementation for all the events you did not handle.

Example:

class MyClass : public QWidget
{
      Q_OBJECT
public:
      MyClass(QWidget *parent = 0);
      ~MyClass();
      bool event(QEvent* ev)
      {
          if (ev->type() == QEvent::PolishRequest) {
              // overwrite handling of PolishRequest if any
              doThings();
              return true;
          } else  if (ev->type() == QEvent::Show) {
              // complement handling of Show if any
              doThings2();
              QWidget::event(ev);
              return true;
          }
          // Make sure the rest of events are handled
          return QWidget::event(ev);
      }
};

See also installEventFilter(), timerEvent(), QCoreApplication::sendEvent(), and QCoreApplication::postEvent().

pub unsafe fn event_filter(
    &mut self,
    watched: impl CastInto<MutPtr<QObject>>,
    event: impl CastInto<MutPtr<QEvent>>
) -> bool

Filters events if this object has been installed as an event filter for the watched object.

Calls C++ function: virtual bool QObject::eventFilter(QObject* watched, QEvent* event).

C++ documentation:

Filters events if this object has been installed as an event filter for the watched object.

In your reimplementation of this function, if you want to filter the event out, i.e. stop it being handled further, return true; otherwise return false.

Example:

class MainWindow : public QMainWindow
{
public:
      MainWindow();
protected:
      bool eventFilter(QObject obj, QEvent ev);
private:
      QTextEdit *textEdit;
};
MainWindow::MainWindow()
{
      textEdit = new QTextEdit;
      setCentralWidget(textEdit);
      textEdit->installEventFilter(this);
}
bool MainWindow::eventFilter(QObject obj, QEvent event)
{
      if (obj == textEdit) {
          if (event->type() == QEvent::KeyPress) {
              QKeyEvent keyEvent = static_cast<QKeyEvent>(event);
              qDebug() << "Ate key press" << keyEvent->key();
              return true;
          } else {
              return false;
          }
      } else {
          // pass the event on to the parent class
          return QMainWindow::eventFilter(obj, event);
      }
}

Notice in the example above that unhandled events are passed to the base class's eventFilter() function, since the base class might have reimplemented eventFilter() for its own internal purposes.

Warning: If you delete the receiver object in this function, be sure to return true. Otherwise, Qt will forward the event to the deleted object and the program might crash.

See also installEventFilter().

pub unsafe fn find_child_q_object_2a(
    &self,
    a_name: impl CastInto<Ref<QString>>,
    options: QFlags<FindChildOption>
) -> MutPtr<QObject>

Returns the child of this object that can be cast into type T and that is called name, or 0 if there is no such object. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QObject* QObject::findChild<QObject*>(const QString& aName = …, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

Returns the child of this object that can be cast into type T and that is called name, or 0 if there is no such object. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

If there is more than one child matching the search, the most direct ancestor is returned. If there are several direct ancestors, it is undefined which one will be returned. In that case, findChildren() should be used.

This example returns a child QPushButton of parentWidget named "button1", even if the button isn't a direct child of the parent:

QPushButton button = parentWidget->findChild<QPushButton >("button1");

This example returns a QListWidget child of parentWidget:

QListWidget list = parentWidget->findChild<QListWidget >();

This example returns a child QPushButton of parentWidget (its direct parent) named "button1":

QPushButton button = parentWidget->findChild<QPushButton >("button1", Qt::FindDirectChildrenOnly);

This example returns a QListWidget child of parentWidget, its direct parent:

QListWidget list = parentWidget->findChild<QListWidget >(QString(), Qt::FindDirectChildrenOnly);

See also findChildren().

pub unsafe fn find_child_q_object_1a(
    &self,
    a_name: impl CastInto<Ref<QString>>
) -> MutPtr<QObject>

Returns the child of this object that can be cast into type T and that is called name, or 0 if there is no such object. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QObject* QObject::findChild<QObject*>(const QString& aName = …) const.

C++ documentation:

Returns the child of this object that can be cast into type T and that is called name, or 0 if there is no such object. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

If there is more than one child matching the search, the most direct ancestor is returned. If there are several direct ancestors, it is undefined which one will be returned. In that case, findChildren() should be used.

This example returns a child QPushButton of parentWidget named "button1", even if the button isn't a direct child of the parent:

QPushButton button = parentWidget->findChild<QPushButton >("button1");

This example returns a QListWidget child of parentWidget:

QListWidget list = parentWidget->findChild<QListWidget >();

This example returns a child QPushButton of parentWidget (its direct parent) named "button1":

QPushButton button = parentWidget->findChild<QPushButton >("button1", Qt::FindDirectChildrenOnly);

This example returns a QListWidget child of parentWidget, its direct parent:

QListWidget list = parentWidget->findChild<QListWidget >(QString(), Qt::FindDirectChildrenOnly);

See also findChildren().

pub unsafe fn find_child_q_object_0a(&self) -> MutPtr<QObject>

Returns the child of this object that can be cast into type T and that is called name, or 0 if there is no such object. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QObject* QObject::findChild<QObject*>() const.

C++ documentation:

Returns the child of this object that can be cast into type T and that is called name, or 0 if there is no such object. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

If there is more than one child matching the search, the most direct ancestor is returned. If there are several direct ancestors, it is undefined which one will be returned. In that case, findChildren() should be used.

This example returns a child QPushButton of parentWidget named "button1", even if the button isn't a direct child of the parent:

QPushButton button = parentWidget->findChild<QPushButton >("button1");

This example returns a QListWidget child of parentWidget:

QListWidget list = parentWidget->findChild<QListWidget >();

This example returns a child QPushButton of parentWidget (its direct parent) named "button1":

QPushButton button = parentWidget->findChild<QPushButton >("button1", Qt::FindDirectChildrenOnly);

This example returns a QListWidget child of parentWidget, its direct parent:

QListWidget list = parentWidget->findChild<QListWidget >(QString(), Qt::FindDirectChildrenOnly);

See also findChildren().

pub unsafe fn find_children_q_abstract_animation_q_string_q_flags_find_child_option(
    &self,
    a_name: impl CastInto<Ref<QString>>,
    options: QFlags<FindChildOption>
) -> CppBox<QListOfQAbstractAnimation>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QAbstractAnimation*> QObject::findChildren<QAbstractAnimation*>(const QString& aName = …, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >("widgetname");

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_abstract_animation_q_reg_exp_q_flags_find_child_option(
    &self,
    re: impl CastInto<Ref<QRegExp>>,
    options: QFlags<FindChildOption>
) -> CppBox<QListOfQAbstractAnimation>

This function overloads findChildren().

Calls C++ function: QList<QAbstractAnimation*> QObject::findChildren<QAbstractAnimation*>(const QRegExp& re, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression regExp, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

pub unsafe fn find_children_q_abstract_animation_q_regular_expression_q_flags_find_child_option(
    &self,
    re: impl CastInto<Ref<QRegularExpression>>,
    options: QFlags<FindChildOption>
) -> CppBox<QListOfQAbstractAnimation>

This function overloads findChildren().

Calls C++ function: QList<QAbstractAnimation*> QObject::findChildren<QAbstractAnimation*>(const QRegularExpression& re, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression re, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

This function was introduced in Qt 5.0.

pub unsafe fn find_children_q_abstract_animation_q_string(
    &self,
    a_name: impl CastInto<Ref<QString>>
) -> CppBox<QListOfQAbstractAnimation>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QAbstractAnimation*> QObject::findChildren<QAbstractAnimation*>(const QString& aName = …) const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >("widgetname");

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_abstract_animation(
    &self
) -> CppBox<QListOfQAbstractAnimation>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QAbstractAnimation*> QObject::findChildren<QAbstractAnimation*>() const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >("widgetname");

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_abstract_animation_q_reg_exp(
    &self,
    re: impl CastInto<Ref<QRegExp>>
) -> CppBox<QListOfQAbstractAnimation>

This function overloads findChildren().

Calls C++ function: QList<QAbstractAnimation*> QObject::findChildren<QAbstractAnimation*>(const QRegExp& re) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression regExp, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

pub unsafe fn find_children_q_abstract_animation_q_regular_expression(
    &self,
    re: impl CastInto<Ref<QRegularExpression>>
) -> CppBox<QListOfQAbstractAnimation>

This function overloads findChildren().

Calls C++ function: QList<QAbstractAnimation*> QObject::findChildren<QAbstractAnimation*>(const QRegularExpression& re) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression re, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

This function was introduced in Qt 5.0.

pub unsafe fn find_children_q_abstract_state_q_string_q_flags_find_child_option(
    &self,
    a_name: impl CastInto<Ref<QString>>,
    options: QFlags<FindChildOption>
) -> CppBox<QListOfQAbstractState>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QAbstractState*> QObject::findChildren<QAbstractState*>(const QString& aName = …, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >("widgetname");

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_abstract_state_q_reg_exp_q_flags_find_child_option(
    &self,
    re: impl CastInto<Ref<QRegExp>>,
    options: QFlags<FindChildOption>
) -> CppBox<QListOfQAbstractState>

This function overloads findChildren().

Calls C++ function: QList<QAbstractState*> QObject::findChildren<QAbstractState*>(const QRegExp& re, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression regExp, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

pub unsafe fn find_children_q_abstract_state_q_regular_expression_q_flags_find_child_option(
    &self,
    re: impl CastInto<Ref<QRegularExpression>>,
    options: QFlags<FindChildOption>
) -> CppBox<QListOfQAbstractState>

This function overloads findChildren().

Calls C++ function: QList<QAbstractState*> QObject::findChildren<QAbstractState*>(const QRegularExpression& re, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression re, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

This function was introduced in Qt 5.0.

pub unsafe fn find_children_q_abstract_state_q_string(
    &self,
    a_name: impl CastInto<Ref<QString>>
) -> CppBox<QListOfQAbstractState>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QAbstractState*> QObject::findChildren<QAbstractState*>(const QString& aName = …) const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >("widgetname");

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_abstract_state(
    &self
) -> CppBox<QListOfQAbstractState>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QAbstractState*> QObject::findChildren<QAbstractState*>() const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >("widgetname");

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_abstract_state_q_reg_exp(
    &self,
    re: impl CastInto<Ref<QRegExp>>
) -> CppBox<QListOfQAbstractState>

This function overloads findChildren().

Calls C++ function: QList<QAbstractState*> QObject::findChildren<QAbstractState*>(const QRegExp& re) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression regExp, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

pub unsafe fn find_children_q_abstract_state_q_regular_expression(
    &self,
    re: impl CastInto<Ref<QRegularExpression>>
) -> CppBox<QListOfQAbstractState>

This function overloads findChildren().

Calls C++ function: QList<QAbstractState*> QObject::findChildren<QAbstractState*>(const QRegularExpression& re) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression re, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

This function was introduced in Qt 5.0.

pub unsafe fn find_children_q_abstract_transition_q_string_q_flags_find_child_option(
    &self,
    a_name: impl CastInto<Ref<QString>>,
    options: QFlags<FindChildOption>
) -> CppBox<QListOfQAbstractTransition>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QAbstractTransition*> QObject::findChildren<QAbstractTransition*>(const QString& aName = …, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >("widgetname");

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_abstract_transition_q_reg_exp_q_flags_find_child_option(
    &self,
    re: impl CastInto<Ref<QRegExp>>,
    options: QFlags<FindChildOption>
) -> CppBox<QListOfQAbstractTransition>

This function overloads findChildren().

Calls C++ function: QList<QAbstractTransition*> QObject::findChildren<QAbstractTransition*>(const QRegExp& re, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression regExp, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

pub unsafe fn find_children_q_abstract_transition_q_regular_expression_q_flags_find_child_option(
    &self,
    re: impl CastInto<Ref<QRegularExpression>>,
    options: QFlags<FindChildOption>
) -> CppBox<QListOfQAbstractTransition>

This function overloads findChildren().

Calls C++ function: QList<QAbstractTransition*> QObject::findChildren<QAbstractTransition*>(const QRegularExpression& re, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression re, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

This function was introduced in Qt 5.0.

pub unsafe fn find_children_q_abstract_transition_q_string(
    &self,
    a_name: impl CastInto<Ref<QString>>
) -> CppBox<QListOfQAbstractTransition>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QAbstractTransition*> QObject::findChildren<QAbstractTransition*>(const QString& aName = …) const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >("widgetname");

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_abstract_transition(
    &self
) -> CppBox<QListOfQAbstractTransition>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QAbstractTransition*> QObject::findChildren<QAbstractTransition*>() const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >("widgetname");

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_abstract_transition_q_reg_exp(
    &self,
    re: impl CastInto<Ref<QRegExp>>
) -> CppBox<QListOfQAbstractTransition>

This function overloads findChildren().

Calls C++ function: QList<QAbstractTransition*> QObject::findChildren<QAbstractTransition*>(const QRegExp& re) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression regExp, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

pub unsafe fn find_children_q_abstract_transition_q_regular_expression(
    &self,
    re: impl CastInto<Ref<QRegularExpression>>
) -> CppBox<QListOfQAbstractTransition>

This function overloads findChildren().

Calls C++ function: QList<QAbstractTransition*> QObject::findChildren<QAbstractTransition*>(const QRegularExpression& re) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression re, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

This function was introduced in Qt 5.0.

pub unsafe fn find_children_q_locale_q_string_q_flags_find_child_option(
    &self,
    a_name: impl CastInto<Ref<QString>>,
    options: QFlags<FindChildOption>
) -> CppBox<QListOfQLocale>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QLocale> QObject::findChildren<QLocale>(const QString& aName = …, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >("widgetname");

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_locale_q_reg_exp_q_flags_find_child_option(
    &self,
    re: impl CastInto<Ref<QRegExp>>,
    options: QFlags<FindChildOption>
) -> CppBox<QListOfQLocale>

This function overloads findChildren().

Calls C++ function: QList<QLocale> QObject::findChildren<QLocale>(const QRegExp& re, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression regExp, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

pub unsafe fn find_children_q_locale_q_regular_expression_q_flags_find_child_option(
    &self,
    re: impl CastInto<Ref<QRegularExpression>>,
    options: QFlags<FindChildOption>
) -> CppBox<QListOfQLocale>

This function overloads findChildren().

Calls C++ function: QList<QLocale> QObject::findChildren<QLocale>(const QRegularExpression& re, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression re, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

This function was introduced in Qt 5.0.

pub unsafe fn find_children_q_locale_q_string(
    &self,
    a_name: impl CastInto<Ref<QString>>
) -> CppBox<QListOfQLocale>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QLocale> QObject::findChildren<QLocale>(const QString& aName = …) const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >("widgetname");

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_locale(&self) -> CppBox<QListOfQLocale>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QLocale> QObject::findChildren<QLocale>() const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >("widgetname");

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_locale_q_reg_exp(
    &self,
    re: impl CastInto<Ref<QRegExp>>
) -> CppBox<QListOfQLocale>

This function overloads findChildren().

Calls C++ function: QList<QLocale> QObject::findChildren<QLocale>(const QRegExp& re) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression regExp, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

pub unsafe fn find_children_q_locale_q_regular_expression(
    &self,
    re: impl CastInto<Ref<QRegularExpression>>
) -> CppBox<QListOfQLocale>

This function overloads findChildren().

Calls C++ function: QList<QLocale> QObject::findChildren<QLocale>(const QRegularExpression& re) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression re, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

This function was introduced in Qt 5.0.

pub unsafe fn find_children_q_object_q_string_q_flags_find_child_option(
    &self,
    a_name: impl CastInto<Ref<QString>>,
    options: QFlags<FindChildOption>
) -> CppBox<QListOfQObject>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QObject*> QObject::findChildren<QObject*>(const QString& aName = …, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >("widgetname");

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_object_q_reg_exp_q_flags_find_child_option(
    &self,
    re: impl CastInto<Ref<QRegExp>>,
    options: QFlags<FindChildOption>
) -> CppBox<QListOfQObject>

This function overloads findChildren().

Calls C++ function: QList<QObject*> QObject::findChildren<QObject*>(const QRegExp& re, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression regExp, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

pub unsafe fn find_children_q_object_q_regular_expression_q_flags_find_child_option(
    &self,
    re: impl CastInto<Ref<QRegularExpression>>,
    options: QFlags<FindChildOption>
) -> CppBox<QListOfQObject>

This function overloads findChildren().

Calls C++ function: QList<QObject*> QObject::findChildren<QObject*>(const QRegularExpression& re, QFlags<Qt::FindChildOption> options = …) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression re, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

This function was introduced in Qt 5.0.

pub unsafe fn find_children_q_object_q_string(
    &self,
    a_name: impl CastInto<Ref<QString>>
) -> CppBox<QListOfQObject>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QObject*> QObject::findChildren<QObject*>(const QString& aName = …) const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >("widgetname");

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_object(&self) -> CppBox<QListOfQObject>

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

Calls C++ function: QList<QObject*> QObject::findChildren<QObject*>() const.

C++ documentation:

Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:

QList<QWidget > widgets = parentWidget.findChildren<QWidget >("widgetname");

This example returns all QPushButtons that are children of parentWidget:

QList<QPushButton > allPButtons = parentWidget.findChildren<QPushButton >();

This example returns all QPushButtons that are immediate children of parentWidget:

QList<QPushButton > childButtons = parentWidget.findChildren<QPushButton >(QString(), Qt::FindDirectChildrenOnly);

See also findChild().

pub unsafe fn find_children_q_object_q_reg_exp(
    &self,
    re: impl CastInto<Ref<QRegExp>>
) -> CppBox<QListOfQObject>

This function overloads findChildren().

Calls C++ function: QList<QObject*> QObject::findChildren<QObject*>(const QRegExp& re) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression regExp, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

pub unsafe fn find_children_q_object_q_regular_expression(
    &self,
    re: impl CastInto<Ref<QRegularExpression>>
) -> CppBox<QListOfQObject>

This function overloads findChildren().

Calls C++ function: QList<QObject*> QObject::findChildren<QObject*>(const QRegularExpression& re) const.

C++ documentation:

This function overloads findChildren().

Returns the children of this object that can be cast to type T and that have names matching the regular expression re, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.

This function was introduced in Qt 5.0.

pub unsafe fn inherits(&self, classname: impl CastInto<Ptr<c_char>>) -> bool

Returns true if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns false.

Calls C++ function: bool QObject::inherits(const char* classname) const.

C++ documentation:

Returns true if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns false.

A class is considered to inherit itself.

Example:

QTimer *timer = new QTimer;         // QTimer inherits QObject
timer->inherits("QTimer");          // returns true
timer->inherits("QObject");         // returns true
timer->inherits("QAbstractButton"); // returns false
// QVBoxLayout inherits QObject and QLayoutItem
QVBoxLayout *layout = new QVBoxLayout;
layout->inherits("QObject");        // returns true
layout->inherits("QLayoutItem");    // returns true (even though QLayoutItem is not a QObject)

If you need to determine whether an object is an instance of a particular class for the purpose of casting it, consider using qobject_cast<Type *>(object) instead.

See also metaObject() and qobject_cast().

pub unsafe fn install_event_filter(
    &mut self,
    filter_obj: impl CastInto<MutPtr<QObject>>
)

Installs an event filter filterObj on this object. For example:

Calls C++ function: void QObject::installEventFilter(QObject* filterObj).

C++ documentation:

Installs an event filter filterObj on this object. For example:

  monitoredObj->installEventFilter(filterObj);

An event filter is an object that receives all events that are sent to this object. The filter can either stop the event or forward it to this object. The event filter filterObj receives events via its eventFilter() function. The eventFilter() function must return true if the event should be filtered, (i.e. stopped); otherwise it must return false.

If multiple event filters are installed on a single object, the filter that was installed last is activated first.

Here's a KeyPressEater class that eats the key presses of its monitored objects:

class KeyPressEater : public QObject
{
      Q_OBJECT
      ...
protected:
      bool eventFilter(QObject obj, QEvent event);
};
bool KeyPressEater::eventFilter(QObject obj, QEvent event)
{
      if (event->type() == QEvent::KeyPress) {
          QKeyEvent keyEvent = static_cast<QKeyEvent >(event);
          qDebug("Ate key press %d", keyEvent->key());
          return true;
      } else {
          // standard event processing
          return QObject::eventFilter(obj, event);
      }
}

And here's how to install it on two widgets:

KeyPressEater keyPressEater = new KeyPressEater(this);
QPushButton pushButton = new QPushButton(this);
QListView *listView = new QListView(this);
pushButton->installEventFilter(keyPressEater);
listView->installEventFilter(keyPressEater);

The QShortcut class, for example, uses this technique to intercept shortcut key presses.

Warning: If you delete the receiver object in your eventFilter() function, be sure to return true. If you return false, Qt sends the event to the deleted object and the program will crash.

Note that the filtering object must be in the same thread as this object. If filterObj is in a different thread, this function does nothing. If either filterObj or this object are moved to a different thread after calling this function, the event filter will not be called until both objects have the same thread affinity again (it is not removed).

See also removeEventFilter(), eventFilter(), and event().

pub unsafe fn is_widget_type(&self) -> bool

Returns true if the object is a widget; otherwise returns false.

Calls C++ function: bool QObject::isWidgetType() const.

C++ documentation:

Returns true if the object is a widget; otherwise returns false.

Calling this function is equivalent to calling inherits("QWidget"), except that it is much faster.

pub unsafe fn is_window_type(&self) -> bool

Returns true if the object is a window; otherwise returns false.

Calls C++ function: bool QObject::isWindowType() const.

C++ documentation:

Returns true if the object is a window; otherwise returns false.

Calling this function is equivalent to calling inherits("QWindow"), except that it is much faster.

pub unsafe fn kill_timer(&mut self, id: c_int)

Kills the timer with timer identifier, id.

Calls C++ function: void QObject::killTimer(int id).

C++ documentation:

Kills the timer with timer identifier, id.

The timer identifier is returned by startTimer() when a timer event is started.

See also timerEvent() and startTimer().

pub unsafe fn meta_object(&self) -> Ptr<QMetaObject>

Returns a pointer to the meta-object of this object.

Calls C++ function: virtual const QMetaObject* QObject::metaObject() const.

C++ documentation:

Returns a pointer to the meta-object of this object.

A meta-object contains information about a class that inherits QObject, e.g. class name, superclass name, properties, signals and slots. Every QObject subclass that contains the Q_OBJECT macro will have a meta-object.

The meta-object information is required by the signal/slot connection mechanism and the property system. The inherits() function also makes use of the meta-object.

If you have no pointer to an actual object instance but still want to access the meta-object of a class, you can use staticMetaObject.

Example:

QObject *obj = new QPushButton;
obj->metaObject()->className();             // returns "QPushButton"
QPushButton::staticMetaObject.className();  // returns "QPushButton"

See also staticMetaObject.

pub unsafe fn move_to_thread(&mut self, thread: impl CastInto<MutPtr<QThread>>)

Changes the thread affinity for this object and its children. The object cannot be moved if it has a parent. Event processing will continue in the targetThread.

Calls C++ function: void QObject::moveToThread(QThread* thread).

C++ documentation:

Changes the thread affinity for this object and its children. The object cannot be moved if it has a parent. Event processing will continue in the targetThread.

To move an object to the main thread, use QApplication::instance() to retrieve a pointer to the current application, and then use QApplication::thread() to retrieve the thread in which the application lives. For example:

myObject->moveToThread(QApplication::instance()->thread());

If targetThread is zero, all event processing for this object and its children stops.

Note that all active timers for the object will be reset. The timers are first stopped in the current thread and restarted (with the same interval) in the targetThread. As a result, constantly moving an object between threads can postpone timer events indefinitely.

A QEvent::ThreadChange event is sent to this object just before the thread affinity is changed. You can handle this event to perform any special processing. Note that any new events that are posted to this object will be handled in the targetThread.

Warning: This function is not thread-safe; the current thread must be same as the current thread affinity. In other words, this function can only "push" an object from the current thread to another thread, it cannot "pull" an object from any arbitrary thread to the current thread.

See also thread().

pub unsafe fn object_name(&self) -> CppBox<QString>

This property holds the name of this object

Calls C++ function: QString QObject::objectName() const.

C++ documentation:

This property holds the name of this object

You can find an object by name (and type) using findChild(). You can find a set of objects with findChildren().

qDebug("MyClass::setPrecision(): (%s) invalid precision %f",
         qPrintable(objectName()), newPrecision);

By default, this property contains an empty string.

Access functions:

QString	objectName() const
void	setObjectName(const QString &name)

Notifier signal:

void

objectNameChanged(const QString &objectName)

[see note below]

Note: This is a private signal. It can be used in signal connections but cannot be emitted by the user.

See also metaObject() and QMetaObject::className().

pub unsafe fn parent(&self) -> MutPtr<QObject>

Returns a pointer to the parent object.

Calls C++ function: QObject* QObject::parent() const.

C++ documentation:

Returns a pointer to the parent object.

See also setParent() and children().

pub unsafe fn property(
    &self,
    name: impl CastInto<Ptr<c_char>>
) -> CppBox<QVariant>

Returns the value of the object's name property.

Calls C++ function: QVariant QObject::property(const char* name) const.

C++ documentation:

Returns the value of the object's name property.

If no such property exists, the returned variant is invalid.

Information about all available properties is provided through the metaObject() and dynamicPropertyNames().

See also setProperty(), QVariant::isValid(), metaObject(), and dynamicPropertyNames().

pub unsafe fn qt_metacall(
    &mut self,
    arg1: Call,
    arg2: c_int,
    arg3: impl CastInto<MutPtr<*mut c_void>>
) -> c_int

Calls C++ function: virtual int QObject::qt_metacall(QMetaObject::Call arg1, int arg2, void** arg3).

pub unsafe fn qt_metacast(
    &mut self,
    arg1: impl CastInto<Ptr<c_char>>
) -> MutPtr<c_void>

Calls C++ function: virtual void* QObject::qt_metacast(const char* arg1).

pub unsafe fn remove_event_filter(
    &mut self,
    obj: impl CastInto<MutPtr<QObject>>
)

Removes an event filter object obj from this object. The request is ignored if such an event filter has not been installed.

Calls C++ function: void QObject::removeEventFilter(QObject* obj).

C++ documentation:

Removes an event filter object obj from this object. The request is ignored if such an event filter has not been installed.

All event filters for this object are automatically removed when this object is destroyed.

It is always safe to remove an event filter, even during event filter activation (i.e. from the eventFilter() function).

See also installEventFilter(), eventFilter(), and event().

pub unsafe fn set_object_name(&mut self, name: impl CastInto<Ref<QString>>)

This property holds the name of this object

Calls C++ function: void QObject::setObjectName(const QString& name).

C++ documentation:

This property holds the name of this object

You can find an object by name (and type) using findChild(). You can find a set of objects with findChildren().

qDebug("MyClass::setPrecision(): (%s) invalid precision %f",
         qPrintable(objectName()), newPrecision);

By default, this property contains an empty string.

Access functions:

QString	objectName() const
void	setObjectName(const QString &name)

Notifier signal:

void

objectNameChanged(const QString &objectName)

[see note below]

Note: This is a private signal. It can be used in signal connections but cannot be emitted by the user.

See also metaObject() and QMetaObject::className().

pub unsafe fn set_parent(&mut self, parent: impl CastInto<MutPtr<QObject>>)

Makes the object a child of parent.

Calls C++ function: void QObject::setParent(QObject* parent).

C++ documentation:

Makes the object a child of parent.

See also parent() and children().

pub unsafe fn set_property(
    &mut self,
    name: impl CastInto<Ptr<c_char>>,
    value: impl CastInto<Ref<QVariant>>
) -> bool

Sets the value of the object's name property to value.

Calls C++ function: bool QObject::setProperty(const char* name, const QVariant& value).

C++ documentation:

Sets the value of the object's name property to value.

If the property is defined in the class using Q_PROPERTY then true is returned on success and false otherwise. If the property is not defined using Q_PROPERTY, and therefore not listed in the meta-object, it is added as a dynamic property and false is returned.

Information about all available properties is provided through the metaObject() and dynamicPropertyNames().

Dynamic properties can be queried again using property() and can be removed by setting the property value to an invalid QVariant. Changing the value of a dynamic property causes a QDynamicPropertyChangeEvent to be sent to the object.

Note: Dynamic properties starting with "_q_" are reserved for internal purposes.

See also property(), metaObject(), dynamicPropertyNames(), and QMetaProperty::write().

pub unsafe fn signals_blocked(&self) -> bool

Returns true if signals are blocked; otherwise returns false.

Calls C++ function: bool QObject::signalsBlocked() const.

C++ documentation:

Returns true if signals are blocked; otherwise returns false.

Signals are not blocked by default.

See also blockSignals() and QSignalBlocker.

pub unsafe fn start_timer_2a(
    &mut self,
    interval: c_int,
    timer_type: TimerType
) -> c_int

Starts a timer and returns a timer identifier, or returns zero if it could not start a timer.

Calls C++ function: int QObject::startTimer(int interval, Qt::TimerType timerType = …).

C++ documentation:

Starts a timer and returns a timer identifier, or returns zero if it could not start a timer.

A timer event will occur every interval milliseconds until killTimer() is called. If interval is 0, then the timer event occurs once every time there are no more window system events to process.

The virtual timerEvent() function is called with the QTimerEvent event parameter class when a timer event occurs. Reimplement this function to get timer events.

If multiple timers are running, the QTimerEvent::timerId() can be used to find out which timer was activated.

Example:

class MyObject : public QObject
{
      Q_OBJECT
public:
      MyObject(QObject *parent = 0);
protected:
      void timerEvent(QTimerEvent *event);
};
MyObject::MyObject(QObject *parent)
      : QObject(parent)
{
      startTimer(50);     // 50-millisecond timer
      startTimer(1000);   // 1-second timer
      startTimer(60000);  // 1-minute timer
      using namespace std::chrono;
      startTimer(milliseconds(50));
      startTimer(seconds(1));
      startTimer(minutes(1));
      // since C++14 we can use std::chrono::duration literals, e.g.:
      startTimer(100ms);
      startTimer(5s);
      startTimer(2min);
      startTimer(1h);
}
void MyObject::timerEvent(QTimerEvent *event)
{
      qDebug() << "Timer ID:" << event->timerId();
}

Note that QTimer's accuracy depends on the underlying operating system and hardware. The timerType argument allows you to customize the accuracy of the timer. See Qt::TimerType for information on the different timer types. Most platforms support an accuracy of 20 milliseconds; some provide more. If Qt is unable to deliver the requested number of timer events, it will silently discard some.

The QTimer class provides a high-level programming interface with single-shot timers and timer signals instead of events. There is also a QBasicTimer class that is more lightweight than QTimer and less clumsy than using timer IDs directly.

See also timerEvent(), killTimer(), and QTimer::singleShot().

pub unsafe fn start_timer_1a(&mut self, interval: c_int) -> c_int

Starts a timer and returns a timer identifier, or returns zero if it could not start a timer.

Calls C++ function: int QObject::startTimer(int interval).

C++ documentation:

Starts a timer and returns a timer identifier, or returns zero if it could not start a timer.

A timer event will occur every interval milliseconds until killTimer() is called. If interval is 0, then the timer event occurs once every time there are no more window system events to process.

The virtual timerEvent() function is called with the QTimerEvent event parameter class when a timer event occurs. Reimplement this function to get timer events.

If multiple timers are running, the QTimerEvent::timerId() can be used to find out which timer was activated.

Example:

class MyObject : public QObject
{
      Q_OBJECT
public:
      MyObject(QObject *parent = 0);
protected:
      void timerEvent(QTimerEvent *event);
};
MyObject::MyObject(QObject *parent)
      : QObject(parent)
{
      startTimer(50);     // 50-millisecond timer
      startTimer(1000);   // 1-second timer
      startTimer(60000);  // 1-minute timer
      using namespace std::chrono;
      startTimer(milliseconds(50));
      startTimer(seconds(1));
      startTimer(minutes(1));
      // since C++14 we can use std::chrono::duration literals, e.g.:
      startTimer(100ms);
      startTimer(5s);
      startTimer(2min);
      startTimer(1h);
}
void MyObject::timerEvent(QTimerEvent *event)
{
      qDebug() << "Timer ID:" << event->timerId();
}

Note that QTimer's accuracy depends on the underlying operating system and hardware. The timerType argument allows you to customize the accuracy of the timer. See Qt::TimerType for information on the different timer types. Most platforms support an accuracy of 20 milliseconds; some provide more. If Qt is unable to deliver the requested number of timer events, it will silently discard some.

The QTimer class provides a high-level programming interface with single-shot timers and timer signals instead of events. There is also a QBasicTimer class that is more lightweight than QTimer and less clumsy than using timer IDs directly.

See also timerEvent(), killTimer(), and QTimer::singleShot().

pub unsafe fn thread(&self) -> MutPtr<QThread>

Returns the thread in which the object lives.

Calls C++ function: QThread* QObject::thread() const.

C++ documentation:

Returns the thread in which the object lives.

See also moveToThread().

Trait Implementations

impl Deref for QTimer

type Target = QObject

The resulting type after dereferencing.

fn deref(&self) -> &QObject

Calls C++ function: QObject* static_cast<QObject*>(QTimer* ptr).

impl DerefMut for QTimer

fn deref_mut(&mut self) -> &mut QObject

Calls C++ function: QObject* static_cast<QObject*>(QTimer* ptr).

impl StaticUpcast<QObject> for QTimer

unsafe fn static_upcast(ptr: Ptr<QTimer>) -> Ptr<QObject>

Calls C++ function: QObject* static_cast<QObject*>(QTimer* ptr).

unsafe fn static_upcast_mut(ptr: MutPtr<QTimer>) -> MutPtr<QObject>

Calls C++ function: QObject* static_cast<QObject*>(QTimer* ptr).

impl StaticDowncast<QTimer> for QObject

unsafe fn static_downcast(ptr: Ptr<QObject>) -> Ptr<QTimer>

Calls C++ function: QTimer* static_cast<QTimer*>(QObject* ptr).

unsafe fn static_downcast_mut(ptr: MutPtr<QObject>) -> MutPtr<QTimer>

Calls C++ function: QTimer* static_cast<QTimer*>(QObject* ptr).

impl DynamicCast<QTimer> for QObject

unsafe fn dynamic_cast(ptr: Ptr<QObject>) -> Ptr<QTimer>

Calls C++ function: QTimer* dynamic_cast<QTimer*>(QObject* ptr).

unsafe fn dynamic_cast_mut(ptr: MutPtr<QObject>) -> MutPtr<QTimer>

Calls C++ function: QTimer* dynamic_cast<QTimer*>(QObject* ptr).

impl CppDeletable for QTimer

unsafe fn delete(&mut self)

Destroys the timer.

Calls C++ function: virtual [destructor] void QTimer::~QTimer().

C++ documentation:

Destroys the timer.