Struct plotly_types::traces::surface::Surface

pub struct Surface<'a> { /* fields omitted */ }

The data the describes the coordinates of the surface is set in z. Data in z should be a {2D array}. Coordinates in x and y can either be 1D {arrays} or {2D arrays} (e.g. to graph parametric surfaces). If not provided in x and y, the x and y coordinates are assumed to be linear starting at 0 with a unit step. The color scale corresponds to the z values by default. For custom color scales, use surfacecolor which should be a {2D array}, where its bounds can be controlled using cmin and cmax.

Implementations

impl<'a> Surface<'a>

pub fn visible(&mut self, visible: Visible) -> &mut Self

Determines whether or not this trace is visible. If legendonly, the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

default: true

pub fn legendgroup(&mut self, legendgroup: &'a str) -> &mut Self

Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.

default: ``

pub fn name(&mut self, name: &'a str) -> &mut Self

Sets the trace name. The trace name appear as the legend item and on hover.

pub fn uid(&mut self, uid: &'a str) -> &mut Self

Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions.

pub fn ids(&mut self, ids: &'a [&'a str]) -> &mut Self

Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

pub fn meta(&mut self, meta: Any) -> &mut Self

Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace name, graph, axis and colorbar title.text, annotation text rangeselector, updatemenues and sliders label text all support meta. To access the trace meta values in an attribute in the same trace, simply use %{meta[i]} where i is the index or key of the meta item in question. To access trace meta in layout attributes, use %{data[n[.meta[i]} where i is the index or key of the meta and n is the trace index.

pub fn hoverlabel(&mut self) -> &mut Hoverlabel<'a>

pub fn stream(&mut self) -> &mut Stream<'a>

pub fn uirevision(&mut self, uirevision: Any) -> &mut Self

Controls persistence of some user-driven changes to the trace: constraintrange in parcoords traces, as well as some editable: true modifications such as name and colorbar.title. Defaults to layout.uirevision. Note that other user-driven trace attribute changes are controlled by layout attributes: trace.visible is controlled by layout.legend.uirevision, selectedpoints is controlled by layout.selectionrevision, and colorbar.(x|y) (accessible with config: {editable: true}) is controlled by layout.editrevision. Trace changes are tracked by uid, which only falls back on trace index if no uid is provided. So if your app can add/remove traces before the end of the data array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a uid that stays with it as it moves.

pub fn z(&mut self, z: &'a [f64]) -> &mut Self

Sets the z coordinates.

pub fn x(&mut self, x: &'a [f64]) -> &mut Self

Sets the x coordinates.

pub fn y(&mut self, y: &'a [f64]) -> &mut Self

Sets the y coordinates.

pub fn text(&mut self, text: &'a str) -> &mut Self

Sets the text elements associated with each z value. If trace hoverinfo contains a text flag and hovertext is not set, these elements will be seen in the hover labels.

default: ``

pub fn hovertext(&mut self, hovertext: &'a str) -> &mut Self

Same as text.

default: ``

pub fn hovertemplate(&mut self, hovertemplate: &'a str) -> &mut Self

Template string used for rendering the information that appear on hover box. Note that this will override hoverinfo. Variables are inserted using %{variable}, for example "y: %{y}". Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-3.x-api-reference/blob/master/Formatting.md#d3_format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-3.x-api-reference/blob/master/Time-Formatting.md#format for details on the date formatting syntax. The variables available in hovertemplate are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are arrayOk: true) are available. Anything contained in tag <extra> is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag <extra></extra>.

default: ``

pub fn connectgaps(&mut self, connectgaps: bool) -> &mut Self

Determines whether or not gaps (i.e. {nan} or missing values) in the z data are filled in.

default: false

pub fn surfacecolor(&mut self, surfacecolor: &'a [f64]) -> &mut Self

Sets the surface color values, used for setting a color scale independent of z.

pub fn cauto(&mut self, cauto: bool) -> &mut Self

Determines whether or not the color domain is computed with respect to the input data (here z or surfacecolor) or the bounds set in cmin and cmax Defaults to false when cmin and cmax are set by the user.

default: true

pub fn cmin(&mut self, cmin: f64) -> &mut Self

Sets the lower bound of the color domain. Value should have the same units as z or surfacecolor and if set, cmax must be set as well.

default: null

pub fn cmax(&mut self, cmax: f64) -> &mut Self

Sets the upper bound of the color domain. Value should have the same units as z or surfacecolor and if set, cmin must be set as well.

default: null

pub fn cmid(&mut self, cmid: f64) -> &mut Self

Sets the mid-point of the color domain by scaling cmin and/or cmax to be equidistant to this point. Value should have the same units as z or surfacecolor. Has no effect when cauto is false.

default: null

pub fn colorscale(&mut self, colorscale: ColorScale<'a>) -> &mut Self

Sets the colorscale. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, [[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]. To control the bounds of the colorscale in color space, usecmin and cmax. Alternatively, colorscale may be a palette name string of the following list: Greys,YlGnBu,Greens,YlOrRd,Bluered,RdBu,Reds,Blues,Picnic,Rainbow,Portland,Jet,Hot,Blackbody,Earth,Electric,Viridis,Cividis.

default: null

pub fn autocolorscale(&mut self, autocolorscale: bool) -> &mut Self

Determines whether the colorscale is a default palette (autocolorscale: true) or the palette determined by colorscale. In case colorscale is unspecified or autocolorscale is true, the default palette will be chosen according to whether numbers in the color array are all positive, all negative or mixed.

default: false

pub fn reversescale(&mut self, reversescale: bool) -> &mut Self

Reverses the color mapping if true. If true, cmin will correspond to the last color in the array and cmax will correspond to the first color.

default: false

pub fn showscale(&mut self, showscale: bool) -> &mut Self

Determines whether or not a colorbar is displayed for this trace.

default: true

pub fn colorbar(&mut self) -> &mut Colorbar<'a>

pub fn coloraxis(&mut self, coloraxis: &'a str) -> &mut Self

Sets a reference to a shared color axis. References to these shared color axes are coloraxis, coloraxis2, coloraxis3, etc. Settings for these shared color axes are set in the layout, under layout.coloraxis, layout.coloraxis2, etc. Note that multiple color scales can be linked to the same color axis.

default: null

pub fn contours(&mut self) -> &mut Contours<'a>

pub fn hidesurface(&mut self, hidesurface: bool) -> &mut Self

Determines whether or not a surface is drawn. For example, set hidesurface to false contours.x.show to true and contours.y.show to true to draw a wire frame plot.

default: false

pub fn lightposition(&mut self) -> &mut Lightposition

pub fn lighting(&mut self) -> &mut Lighting

pub fn opacity(&mut self, opacity: f64) -> &mut Self

Sets the opacity of the surface. Please note that in the case of using high opacity values for example a value greater than or equal to 0.5 on two surfaces (and 0.25 with four surfaces), an overlay of multiple transparent surfaces may not perfectly be sorted in depth by the webgl API. This behavior may be improved in the near future and is subject to change.

default: 1

pub fn opacityscale(&mut self, opacityscale: Any) -> &mut Self

Sets the opacityscale. The opacityscale must be an array containing arrays mapping a normalized value to an opacity value. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, [[0, 1], [0.5, 0.2], [1, 1]] means that higher/lower values would have higher opacity values and those in the middle would be more transparent Alternatively, opacityscale may be a palette name string of the following list: 'min', 'max', 'extremes' and 'uniform'. The default is 'uniform'.

pub fn hoverinfo(&mut self) -> &mut Hoverinfo

Determines which trace information appear on hover. If none or skip are set, no information is displayed upon hovering. But, if none is set, click and hover events are still fired.

default: all

pub fn showlegend(&mut self, showlegend: bool) -> &mut Self

Determines whether or not an item corresponding to this trace is shown in the legend.

default: false

pub fn xcalendar(&mut self, xcalendar: Xcalendar) -> &mut Self

Sets the calendar system to use with x date data.

default: gregorian

pub fn ycalendar(&mut self, ycalendar: Ycalendar) -> &mut Self

Sets the calendar system to use with y date data.

default: gregorian

pub fn zcalendar(&mut self, zcalendar: Zcalendar) -> &mut Self

Sets the calendar system to use with z date data.

default: gregorian

pub fn scene(&mut self, scene: &'a str) -> &mut Self

Sets a reference between this trace's 3D coordinate system and a 3D scene. If scene (the default value), the (x,y,z) coordinates refer to layout.scene. If scene2, the (x,y,z) coordinates refer to layout.scene2, and so on.

default: scene

pub fn idssrc(&mut self, idssrc: &'a str) -> &mut Self

Sets the source reference on Chart Studio Cloud for ids .

pub fn customdatasrc(&mut self, customdatasrc: &'a str) -> &mut Self

Sets the source reference on Chart Studio Cloud for customdata .

pub fn metasrc(&mut self, metasrc: &'a str) -> &mut Self

Sets the source reference on Chart Studio Cloud for meta .

pub fn zsrc(&mut self, zsrc: &'a str) -> &mut Self

Sets the source reference on Chart Studio Cloud for z .

pub fn xsrc(&mut self, xsrc: &'a str) -> &mut Self

Sets the source reference on Chart Studio Cloud for x .

pub fn ysrc(&mut self, ysrc: &'a str) -> &mut Self

Sets the source reference on Chart Studio Cloud for y .

pub fn textsrc(&mut self, textsrc: &'a str) -> &mut Self

Sets the source reference on Chart Studio Cloud for text .

pub fn hovertextsrc(&mut self, hovertextsrc: &'a str) -> &mut Self

Sets the source reference on Chart Studio Cloud for hovertext .

pub fn hovertemplatesrc(&mut self, hovertemplatesrc: &'a str) -> &mut Self

Sets the source reference on Chart Studio Cloud for hovertemplate .

pub fn surfacecolorsrc(&mut self, surfacecolorsrc: &'a str) -> &mut Self

Sets the source reference on Chart Studio Cloud for surfacecolor .

pub fn hoverinfosrc(&mut self, hoverinfosrc: &'a str) -> &mut Self

Sets the source reference on Chart Studio Cloud for hoverinfo .

Trait Implementations

impl<'a> Default for Surface<'a>

fn default() -> Surface<'a>

Returns the "default value" for a type.

impl<'a> Serialize for Surface<'a>

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error> where
    __S: Serializer, 

Serialize this value into the given Serde serializer.