1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496
/*!
This module defines a low level and *mostly* safe abstraction around the
core PCRE2 regex primitives. Callers may still need to deal with some
unsafety, but this layer will take care of the obvious things, such as
resource management and error handling.
*/
use std::{cmp, ptr, slice};
use {libc::c_void, pcre2_sys::*};
use crate::error::Error;
/// Returns true if and only if PCRE2 believes that JIT is available.
pub fn is_jit_available() -> bool {
let mut rc: u32 = 0;
let error_code = unsafe {
pcre2_config_8(PCRE2_CONFIG_JIT, &mut rc as *mut _ as *mut c_void)
};
if error_code < 0 {
// If PCRE2_CONFIG_JIT is a bad option, then there's a bug somewhere.
panic!("BUG: {}", Error::jit(error_code));
}
rc == 1
}
/// Returns the version of PCRE2 being used.
///
/// The tuple returned corresponds to the major and minor version, e.g.,
/// `(10, 32)`.
pub fn version() -> (u32, u32) {
(PCRE2_MAJOR, PCRE2_MINOR)
}
/// Escapes all regular expression meta characters in `pattern`.
///
/// The string returned may be safely used as a literal in a regular
/// expression.
pub fn escape(pattern: &str) -> String {
fn is_meta_character(c: char) -> bool {
match c {
'\\' | '.' | '+' | '*' | '?' | '(' | ')' | '|' | '[' | ']'
| '{' | '}' | '^' | '$' | '#' | '-' => true,
_ => false,
}
}
// Is it really true that PCRE2 doesn't have an API routine to
// escape a pattern so that it matches literally? Wow. I couldn't
// find one. It does of course have \Q...\E, but, umm, what if the
// literal contains a \E?
let mut quoted = String::new();
quoted.reserve(pattern.len());
for c in pattern.chars() {
if is_meta_character(c) {
quoted.push('\\');
}
quoted.push(c);
}
quoted
}
/// A low level representation of a compiled PCRE2 code object.
pub(crate) struct Code {
code: *mut pcre2_code_8,
compiled_jit: bool,
// We hang on to this but don't use it so that it gets freed when the
// compiled code gets freed. It's not clear whether this is necessary or
// not, but presumably doesn't cost us much to be conservative.
#[allow(dead_code)]
ctx: CompileContext,
}
// SAFETY: Compiled PCRE2 code objects are immutable once built and explicitly
// safe to use from multiple threads simultaneously.
//
// One hitch here is that JIT compiling can write into a PCRE2 code object, but
// we only ever JIT compile immediately after first building the code object
// and before making it available to the caller.
unsafe impl Send for Code {}
unsafe impl Sync for Code {}
impl Drop for Code {
fn drop(&mut self) {
unsafe { pcre2_code_free_8(self.code) }
}
}
impl Code {
/// Compile the given pattern with the given options. If there was a
/// problem compiling the pattern, then return an error.
pub(crate) fn new(
pattern: &str,
options: u32,
mut ctx: CompileContext,
) -> Result<Code, Error> {
let (mut error_code, mut error_offset) = (0, 0);
let code = unsafe {
pcre2_compile_8(
pattern.as_ptr(),
pattern.len(),
options,
&mut error_code,
&mut error_offset,
ctx.as_mut_ptr(),
)
};
if code.is_null() {
Err(Error::compile(error_code, error_offset))
} else {
Ok(Code { code, compiled_jit: false, ctx })
}
}
/// JIT compile this code object.
///
/// If there was a problem performing JIT compilation, then this returns
/// an error.
pub(crate) fn jit_compile(&mut self) -> Result<(), Error> {
let error_code =
unsafe { pcre2_jit_compile_8(self.code, PCRE2_JIT_COMPLETE) };
if error_code == 0 {
self.compiled_jit = true;
Ok(())
} else {
Err(Error::jit(error_code))
}
}
/// Build and return an ordered sequence of all capture group names in this
/// compiled regex.
///
/// The returned vector has a slot for every capturing group (including the
/// one corresponding to the entire regex, which is always unnamed). Groups
/// that are unnamed are set to `None`.
///
/// If there was a problem querying the compiled object for information,
/// then this returns an error.
pub(crate) fn capture_names(&self) -> Result<Vec<Option<String>>, Error> {
// This is an object lesson in why C sucks. All we need is a map from
// a name to a number, but we need to go through all sorts of
// shenanigans to get it. In order to verify this code, see
// https://www.pcre.org/current/doc/html/pcre2api.html
// and search for PCRE2_INFO_NAMETABLE.
let name_count = self.name_count()?;
let size = self.name_entry_size()?;
let table = unsafe {
slice::from_raw_parts(self.raw_name_table()?, name_count * size)
};
let mut names = vec![None; self.capture_count()?];
for i in 0..name_count {
let entry = &table[i * size..(i + 1) * size];
let name = &entry[2..];
let nulat = name
.iter()
.position(|&b| b == 0)
.expect("a NUL in name table entry");
let index = (entry[0] as usize) << 8 | (entry[1] as usize);
names[index] = String::from_utf8(name[..nulat].to_vec())
.map(Some)
// We require our pattern to be valid UTF-8, so all capture
// names should also be valid UTF-8.
.expect("valid UTF-8 for capture name");
}
Ok(names)
}
/// Return the underlying raw pointer to the code object.
pub(crate) fn as_ptr(&self) -> *const pcre2_code_8 {
self.code
}
/// Returns the raw name table, where each entry in the table corresponds
/// to a mapping between a named capturing group and the index of that
/// capturing group. The encoding for each item is as follows:
///
/// * 2 bytes encoding the capture index (big-endian)
/// * N bytes encoding the code units of the name
/// * 1 byte for the NUL terminator
/// * M padding bytes, corresponding to the difference in length between
/// this name and the longest name.
///
/// In particular, each entry uses the same number of bytes.
///
/// Entries are in alphabetical order.
fn raw_name_table(&self) -> Result<*const u8, Error> {
let mut bytes: *const u8 = ptr::null();
let rc = unsafe {
pcre2_pattern_info_8(
self.as_ptr(),
PCRE2_INFO_NAMETABLE,
&mut bytes as *mut *const u8 as *mut c_void,
)
};
if rc != 0 {
Err(Error::info(rc))
} else {
Ok(bytes)
}
}
/// Returns the number of named capturing groups.
fn name_count(&self) -> Result<usize, Error> {
let mut count: u32 = 0;
let rc = unsafe {
pcre2_pattern_info_8(
self.as_ptr(),
PCRE2_INFO_NAMECOUNT,
&mut count as *mut u32 as *mut c_void,
)
};
if rc != 0 {
Err(Error::info(rc))
} else {
Ok(count as usize)
}
}
/// Returns the entry size of each name in the name table.
///
/// This appears to correspond to `3` plus the size of the longest named
/// capturing group. The extra 3 bytes correspond to a NUL terminator and
/// two prefix bytes corresponding to a big-endian encoding of the index
/// of the capture group.
fn name_entry_size(&self) -> Result<usize, Error> {
let mut size: u32 = 0;
let rc = unsafe {
pcre2_pattern_info_8(
self.as_ptr(),
PCRE2_INFO_NAMEENTRYSIZE,
&mut size as *mut u32 as *mut c_void,
)
};
if rc != 0 {
Err(Error::info(rc))
} else {
Ok(size as usize)
}
}
/// Returns the total number of capturing groups in this regex. This
/// includes the capturing group for the entire pattern, so that this is
/// always 1 more than the number of syntactic groups in the pattern.
pub(crate) fn capture_count(&self) -> Result<usize, Error> {
let mut count: u32 = 0;
let rc = unsafe {
pcre2_pattern_info_8(
self.as_ptr(),
PCRE2_INFO_CAPTURECOUNT,
&mut count as *mut u32 as *mut c_void,
)
};
if rc != 0 {
Err(Error::info(rc))
} else {
Ok(1 + count as usize)
}
}
}
/// A low level representation of PCRE2's compilation context.
pub(crate) struct CompileContext(*mut pcre2_compile_context_8);
// SAFETY: Compile contexts are safe to read from multiple threads
// simultaneously. No interior mutability is used, so Sync is safe.
unsafe impl Send for CompileContext {}
unsafe impl Sync for CompileContext {}
impl Drop for CompileContext {
fn drop(&mut self) {
unsafe { pcre2_compile_context_free_8(self.0) }
}
}
impl CompileContext {
/// Create a new empty compilation context.
///
/// If memory could not be allocated for the context, then this panics.
pub(crate) fn new() -> CompileContext {
let ctx = unsafe { pcre2_compile_context_create_8(ptr::null_mut()) };
assert!(!ctx.is_null(), "could not allocate compile context");
CompileContext(ctx)
}
/// Set the PCRE2 newline sequence.
///
/// Valid values are: PCRE2_NEWLINE_CR, PCRE2_NEWLINE_LF,
/// PCRE2_NEWLINE_CRLF, PCRE2_NEWLINE_ANYCRLF, PCRE2_NEWLINE_ANY or
/// PCRE2_NEWLINE_NUL. Using any other value results in an error.
pub(crate) fn set_newline(&mut self, value: u32) -> Result<(), Error> {
let rc = unsafe { pcre2_set_newline_8(self.0, value) };
if rc == 0 {
Ok(())
} else {
Err(Error::option(rc))
}
}
fn as_mut_ptr(&mut self) -> *mut pcre2_compile_context_8 {
self.0
}
}
/// Configuration for PCRE2's match context.
#[derive(Clone, Debug)]
pub(crate) struct MatchConfig {
/// When set, a custom JIT stack will be created with the given maximum
/// size.
pub(crate) max_jit_stack_size: Option<usize>,
}
impl Default for MatchConfig {
fn default() -> MatchConfig {
MatchConfig { max_jit_stack_size: None }
}
}
/// A low level representation of a match data block.
///
/// Technically, a single match data block can be used with multiple regexes
/// (not simultaneously), but in practice, we just create a single match data
/// block for each regex for each thread it's used in.
pub(crate) struct MatchData {
config: MatchConfig,
match_context: *mut pcre2_match_context_8,
match_data: *mut pcre2_match_data_8,
jit_stack: Option<*mut pcre2_jit_stack_8>,
ovector_ptr: *const usize,
ovector_count: u32,
}
// SAFETY: Match data blocks can be freely sent from one thread to another,
// but they do not support multiple threads using them simultaneously. We still
// implement Sync however, since we require mutable access to use the match
// data block for executing a search, which statically prevents simultaneous
// reading/writing. It is legal to read match data blocks from multiple threads
// simultaneously.
unsafe impl Send for MatchData {}
unsafe impl Sync for MatchData {}
impl Drop for MatchData {
fn drop(&mut self) {
unsafe {
if let Some(stack) = self.jit_stack {
pcre2_jit_stack_free_8(stack);
}
pcre2_match_data_free_8(self.match_data);
pcre2_match_context_free_8(self.match_context);
}
}
}
impl MatchData {
/// Create a new match data block from a compiled PCRE2 code object.
///
/// This panics if memory could not be allocated for the block.
pub(crate) fn new(config: MatchConfig, code: &Code) -> MatchData {
let match_context =
unsafe { pcre2_match_context_create_8(ptr::null_mut()) };
assert!(!match_context.is_null(), "failed to allocate match context");
let match_data = unsafe {
pcre2_match_data_create_from_pattern_8(
code.as_ptr(),
ptr::null_mut(),
)
};
assert!(!match_data.is_null(), "failed to allocate match data block");
let jit_stack = match config.max_jit_stack_size {
None => None,
Some(_) if !code.compiled_jit => None,
Some(max) => {
let stack = unsafe {
pcre2_jit_stack_create_8(
cmp::min(max, 32 * 1 << 10),
max,
ptr::null_mut(),
)
};
assert!(!stack.is_null(), "failed to allocate JIT stack");
unsafe {
pcre2_jit_stack_assign_8(
match_context,
None,
stack as *mut c_void,
)
};
Some(stack)
}
};
let ovector_ptr = unsafe { pcre2_get_ovector_pointer_8(match_data) };
assert!(!ovector_ptr.is_null(), "got NULL ovector pointer");
let ovector_count = unsafe { pcre2_get_ovector_count_8(match_data) };
MatchData {
config,
match_context,
match_data,
jit_stack,
ovector_ptr,
ovector_count,
}
}
/// Return the configuration for this match data object.
pub(crate) fn config(&self) -> &MatchConfig {
&self.config
}
/// Execute PCRE2's primary match routine on the given subject string
/// starting at the given offset. The provided options are passed to PCRE2
/// as is.
///
/// This returns false if no match occurred.
///
/// Match offsets can be extracted via `ovector`.
///
/// # Safety
///
/// This routine is marked unsafe because it allows the caller to set
/// arbitrary PCRE2 options. Some of those options can invoke undefined
/// behavior when not used correctly. For example, if PCRE2_NO_UTF_CHECK
/// is given and UTF mode is enabled and the given subject string is not
/// valid UTF-8, then the result is undefined.
pub(crate) unsafe fn find(
&mut self,
code: &Code,
mut subject: &[u8],
start: usize,
options: u32,
) -> Result<bool, Error> {
// When the subject is empty, we use an empty slice
// with a known valid pointer. Otherwise, slices derived
// from, e.g., an empty `Vec<u8>` may not have a valid
// pointer, since creating an empty `Vec` is guaranteed
// to not allocate.
const EMPTY: &[u8] = &[];
if subject.is_empty() {
subject = EMPTY;
}
let rc = pcre2_match_8(
code.as_ptr(),
subject.as_ptr(),
subject.len(),
start,
options,
self.as_mut_ptr(),
self.match_context,
);
if rc == PCRE2_ERROR_NOMATCH {
Ok(false)
} else if rc > 0 {
Ok(true)
} else {
// We always create match data with
// pcre2_match_data_create_from_pattern, so the ovector should
// always be big enough.
assert!(rc != 0, "ovector should never be too small");
Err(Error::matching(rc))
}
}
/// Return a mutable reference to the underlying match data.
fn as_mut_ptr(&mut self) -> *mut pcre2_match_data_8 {
self.match_data
}
/// Return the ovector corresponding to this match data.
///
/// The ovector represents match offsets as pairs. This always returns
/// N + 1 pairs (so 2*N + 1 offsets), where N is the number of capturing
/// groups in the original regex.
pub(crate) fn ovector(&self) -> &[usize] {
// SAFETY: Both our ovector pointer and count are derived directly from
// the creation of a valid match data block. One interesting question
// here is whether the contents of the ovector are always initialized.
// The PCRE2 documentation suggests that they are (so does testing),
// but this isn't actually 100% clear!
unsafe {
slice::from_raw_parts(
self.ovector_ptr,
// This could in theory overflow, but the ovector count comes
// directly from PCRE2, so presumably it's guaranteed to never
// overflow size_t/usize. Also, in practice, this would require
// a number of capture groups so large as to be probably
// impossible.
self.ovector_count as usize * 2,
)
}
}
}