Struct nvapi_sys::gpu::display::DisplayIdsFlags

pub struct DisplayIdsFlags { /* fields omitted */ }

Bitfield in NV_GPU_DISPLAYIDS

Implementations

impl DisplayIdsFlags

pub const DYNAMIC: DisplayIdsFlags

This display is part of MST topology and it's a dynamic

pub const MST_ROOT_NODE: DisplayIdsFlags

This displayID belongs to a multi stream enabled connector(root node). Note that when multi stream is enabled and a single multi stream capable monitor is connected to it, the monitor will share the display id with the RootNode.

pub const ACTIVE: DisplayIdsFlags

This display is being actively driven

pub const CLUSTER: DisplayIdsFlags

This display is the representative display

pub const OS_VISIBLE: DisplayIdsFlags

This display is reported to the OS

pub const WIRELESS: DisplayIdsFlags

This display is wireless

pub const CONNECTED: DisplayIdsFlags

This display is connected

pub const RESERVED_INTERNAL: DisplayIdsFlags

Do not use

pub const PHYSICALLY_CONNECTED: DisplayIdsFlags

this display is a phycially connected display; Valid only when is Connected bit is set

pub const RESERVED: DisplayIdsFlags

must be zero

pub const fn empty() -> DisplayIdsFlags

Returns an empty set of flags

pub const fn all() -> DisplayIdsFlags

Returns the set containing all flags.

pub const fn bits(&self) -> NV_GPU_DISPLAYIDS_FLAGS

Returns the raw value of the flags currently stored.

pub fn from_bits(bits: NV_GPU_DISPLAYIDS_FLAGS) -> Option<DisplayIdsFlags>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(
    bits: NV_GPU_DISPLAYIDS_FLAGS
) -> DisplayIdsFlags

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(
    bits: NV_GPU_DISPLAYIDS_FLAGS
) -> DisplayIdsFlags

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: DisplayIdsFlags) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: DisplayIdsFlags) -> bool

Returns true all of the flags in other are contained within self.

pub fn insert(&mut self, other: DisplayIdsFlags)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: DisplayIdsFlags)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: DisplayIdsFlags)

Toggles the specified flags in-place.

pub fn set(&mut self, other: DisplayIdsFlags, value: bool)

Inserts or removes the specified flags depending on the passed value.

Trait Implementations

impl Binary for DisplayIdsFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd<DisplayIdsFlags> for DisplayIdsFlags

type Output = DisplayIdsFlags

The resulting type after applying the & operator.

fn bitand(self, other: DisplayIdsFlags) -> DisplayIdsFlags

Returns the intersection between the two sets of flags.

impl BitAndAssign<DisplayIdsFlags> for DisplayIdsFlags

fn bitand_assign(&mut self, other: DisplayIdsFlags)

Disables all flags disabled in the set.

impl BitOr<DisplayIdsFlags> for DisplayIdsFlags

type Output = DisplayIdsFlags

The resulting type after applying the | operator.

fn bitor(self, other: DisplayIdsFlags) -> DisplayIdsFlags

Returns the union of the two sets of flags.

impl BitOrAssign<DisplayIdsFlags> for DisplayIdsFlags

fn bitor_assign(&mut self, other: DisplayIdsFlags)

Adds the set of flags.

impl BitXor<DisplayIdsFlags> for DisplayIdsFlags

type Output = DisplayIdsFlags

The resulting type after applying the ^ operator.

fn bitxor(self, other: DisplayIdsFlags) -> DisplayIdsFlags

Returns the left flags, but with all the right flags toggled.

impl BitXorAssign<DisplayIdsFlags> for DisplayIdsFlags

fn bitxor_assign(&mut self, other: DisplayIdsFlags)

Toggles the set of flags.

impl Clone for DisplayIdsFlags

fn clone(&self) -> DisplayIdsFlags

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for DisplayIdsFlags

impl Debug for DisplayIdsFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for DisplayIdsFlags

fn default() -> DisplayIdsFlags

Returns the "default value" for a type.

impl<'de> Deserialize<'de> for DisplayIdsFlags

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error> where
    __D: Deserializer<'de>, 

Deserialize this value from the given Serde deserializer.

impl Eq for DisplayIdsFlags

impl Extend<DisplayIdsFlags> for DisplayIdsFlags

fn extend<T: IntoIterator<Item = DisplayIdsFlags>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬 This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬 This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<DisplayIdsFlags> for DisplayIdsFlags

fn from_iter<T: IntoIterator<Item = DisplayIdsFlags>>(
    iterator: T
) -> DisplayIdsFlags

Creates a value from an iterator.

impl Hash for DisplayIdsFlags

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl Iterator for DisplayIdsFlags

type Item = Self

The type of the elements being iterated over.

fn next(&mut self) -> Option<Self::Item>

Advances the iterator and returns the next value.

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the iterator.

fn count(self) -> usize

Consumes the iterator, counting the number of iterations and returning it.

fn last(self) -> Option<Self::Item>

Consumes the iterator, returning the last element.

fn nth(&mut self, n: usize) -> Option<Self::Item>

Returns the nth element of the iterator.

fn step_by(self, step: usize) -> StepBy<Self>

Creates an iterator starting at the same point, but stepping by the given amount at each iteration.

fn chain<U>(self, other: U) -> Chain<Self, <U as IntoIterator>::IntoIter> where
    U: IntoIterator<Item = Self::Item>, 

Takes two iterators and creates a new iterator over both in sequence.

fn zip<U>(self, other: U) -> Zip<Self, <U as IntoIterator>::IntoIter> where
    U: IntoIterator, 

'Zips up' two iterators into a single iterator of pairs.

fn map<B, F>(self, f: F) -> Map<Self, F> where
    F: FnMut(Self::Item) -> B, 

Takes a closure and creates an iterator which calls that closure on each element.

fn for_each<F>(self, f: F) where
    F: FnMut(Self::Item), 

Calls a closure on each element of an iterator.

fn filter<P>(self, predicate: P) -> Filter<Self, P> where
    P: FnMut(&Self::Item) -> bool, 

Creates an iterator which uses a closure to determine if an element should be yielded.

fn filter_map<B, F>(self, f: F) -> FilterMap<Self, F> where
    F: FnMut(Self::Item) -> Option<B>, 

Creates an iterator that both filters and maps.

fn enumerate(self) -> Enumerate<Self>

Creates an iterator which gives the current iteration count as well as the next value.

fn peekable(self) -> Peekable<Self>

Creates an iterator which can use peek to look at the next element of the iterator without consuming it.

fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P> where
    P: FnMut(&Self::Item) -> bool, 

Creates an iterator that skips elements based on a predicate.

fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P> where
    P: FnMut(&Self::Item) -> bool, 

Creates an iterator that yields elements based on a predicate.

fn map_while<B, P>(self, predicate: P) -> MapWhile<Self, P> where
    P: FnMut(Self::Item) -> Option<B>, 

🔬 This is a nightly-only experimental API. (iter_map_while)

recently added

Creates an iterator that both yields elements based on a predicate and maps.

fn skip(self, n: usize) -> Skip<Self>

Creates an iterator that skips the first n elements.

fn take(self, n: usize) -> Take<Self>

Creates an iterator that yields its first n elements.

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F> where
    F: FnMut(&mut St, Self::Item) -> Option<B>, 

An iterator adaptor similar to fold that holds internal state and produces a new iterator.

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F> where
    F: FnMut(Self::Item) -> U,
    U: IntoIterator, 

Creates an iterator that works like map, but flattens nested structure.

fn flatten(self) -> Flatten<Self> where
    Self::Item: IntoIterator, 

Creates an iterator that flattens nested structure.

fn fuse(self) -> Fuse<Self>

Creates an iterator which ends after the first None.

fn inspect<F>(self, f: F) -> Inspect<Self, F> where
    F: FnMut(&Self::Item), 

Does something with each element of an iterator, passing the value on.

fn by_ref(&mut self) -> &mut Self

Borrows an iterator, rather than consuming it.

#[must_use = "if you really need to exhaust the iterator, consider `.for_each(drop)` instead"]fn collect<B>(self) -> B where
    B: FromIterator<Self::Item>, 

Transforms an iterator into a collection.

fn partition<B, F>(self, f: F) -> (B, B) where
    B: Default + Extend<Self::Item>,
    F: FnMut(&Self::Item) -> bool, 

Consumes an iterator, creating two collections from it.

fn partition_in_place<'a, T, P>(self, predicate: P) -> usize where
    P: FnMut(&T) -> bool,
    Self: DoubleEndedIterator<Item = &'a mut T>,
    T: 'a, 

🔬 This is a nightly-only experimental API. (iter_partition_in_place)

new API

Reorders the elements of this iterator in-place according to the given predicate, such that all those that return true precede all those that return false. Returns the number of true elements found.

fn is_partitioned<P>(self, predicate: P) -> bool where
    P: FnMut(Self::Item) -> bool, 

🔬 This is a nightly-only experimental API. (iter_is_partitioned)

new API

Checks if the elements of this iterator are partitioned according to the given predicate, such that all those that return true precede all those that return false.

fn try_fold<B, F, R>(&mut self, init: B, f: F) -> R where
    F: FnMut(B, Self::Item) -> R,
    R: Try<Ok = B>, 

An iterator method that applies a function as long as it returns successfully, producing a single, final value.

fn try_for_each<F, R>(&mut self, f: F) -> R where
    F: FnMut(Self::Item) -> R,
    R: Try<Ok = ()>, 

An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error.

fn fold<B, F>(self, init: B, f: F) -> B where
    F: FnMut(B, Self::Item) -> B, 

An iterator method that applies a function, producing a single, final value.

fn fold_first<F>(self, f: F) -> Option<Self::Item> where
    F: FnMut(Self::Item, Self::Item) -> Self::Item, 

🔬 This is a nightly-only experimental API. (iterator_fold_self)

The same as fold(), but uses the first element in the iterator as the initial value, folding every subsequent element into it. If the iterator is empty, return None; otherwise, return the result of the fold.

fn all<F>(&mut self, f: F) -> bool where
    F: FnMut(Self::Item) -> bool, 

Tests if every element of the iterator matches a predicate.

fn any<F>(&mut self, f: F) -> bool where
    F: FnMut(Self::Item) -> bool, 

Tests if any element of the iterator matches a predicate.

fn find<P>(&mut self, predicate: P) -> Option<Self::Item> where
    P: FnMut(&Self::Item) -> bool, 

Searches for an element of an iterator that satisfies a predicate.

fn find_map<B, F>(&mut self, f: F) -> Option<B> where
    F: FnMut(Self::Item) -> Option<B>, 

Applies function to the elements of iterator and returns the first non-none result.

fn try_find<F, R>(
    &mut self,
    f: F
) -> Result<Option<Self::Item>, <R as Try>::Error> where
    F: FnMut(&Self::Item) -> R,
    R: Try<Ok = bool>, 

🔬 This is a nightly-only experimental API. (try_find)

new API

Applies function to the elements of iterator and returns the first true result or the first error.

fn position<P>(&mut self, predicate: P) -> Option<usize> where
    P: FnMut(Self::Item) -> bool, 

Searches for an element in an iterator, returning its index.

fn rposition<P>(&mut self, predicate: P) -> Option<usize> where
    P: FnMut(Self::Item) -> bool,
    Self: ExactSizeIterator + DoubleEndedIterator, 

Searches for an element in an iterator from the right, returning its index.

fn max(self) -> Option<Self::Item> where
    Self::Item: Ord, 

Returns the maximum element of an iterator.

fn min(self) -> Option<Self::Item> where
    Self::Item: Ord, 

Returns the minimum element of an iterator.

fn max_by_key<B, F>(self, f: F) -> Option<Self::Item> where
    B: Ord,
    F: FnMut(&Self::Item) -> B, 

Returns the element that gives the maximum value from the specified function.

fn max_by<F>(self, compare: F) -> Option<Self::Item> where
    F: FnMut(&Self::Item, &Self::Item) -> Ordering, 

Returns the element that gives the maximum value with respect to the specified comparison function.

fn min_by_key<B, F>(self, f: F) -> Option<Self::Item> where
    B: Ord,
    F: FnMut(&Self::Item) -> B, 

Returns the element that gives the minimum value from the specified function.

fn min_by<F>(self, compare: F) -> Option<Self::Item> where
    F: FnMut(&Self::Item, &Self::Item) -> Ordering, 

Returns the element that gives the minimum value with respect to the specified comparison function.

fn rev(self) -> Rev<Self> where
    Self: DoubleEndedIterator, 

Reverses an iterator's direction.

fn unzip<A, B, FromA, FromB>(self) -> (FromA, FromB) where
    FromA: Default + Extend<A>,
    FromB: Default + Extend<B>,
    Self: Iterator<Item = (A, B)>, 

Converts an iterator of pairs into a pair of containers.

fn copied<'a, T>(self) -> Copied<Self> where
    Self: Iterator<Item = &'a T>,
    T: 'a + Copy, 

Creates an iterator which copies all of its elements.

fn cloned<'a, T>(self) -> Cloned<Self> where
    Self: Iterator<Item = &'a T>,
    T: 'a + Clone, 

Creates an iterator which clones all of its elements.

fn cycle(self) -> Cycle<Self> where
    Self: Clone, 

Repeats an iterator endlessly.

fn sum<S>(self) -> S where
    S: Sum<Self::Item>, 

Sums the elements of an iterator.

fn product<P>(self) -> P where
    P: Product<Self::Item>, 

Iterates over the entire iterator, multiplying all the elements

fn cmp<I>(self, other: I) -> Ordering where
    I: IntoIterator<Item = Self::Item>,
    Self::Item: Ord, 

Lexicographically compares the elements of this Iterator with those of another.

fn cmp_by<I, F>(self, other: I, cmp: F) -> Ordering where
    F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Ordering,
    I: IntoIterator, 

🔬 This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function.

fn partial_cmp<I>(self, other: I) -> Option<Ordering> where
    I: IntoIterator,
    Self::Item: PartialOrd<<I as IntoIterator>::Item>, 

Lexicographically compares the elements of this Iterator with those of another.

fn partial_cmp_by<I, F>(self, other: I, partial_cmp: F) -> Option<Ordering> where
    F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Option<Ordering>,
    I: IntoIterator, 

🔬 This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function.

fn eq<I>(self, other: I) -> bool where
    I: IntoIterator,
    Self::Item: PartialEq<<I as IntoIterator>::Item>, 

Determines if the elements of this Iterator are equal to those of another.

fn eq_by<I, F>(self, other: I, eq: F) -> bool where
    F: FnMut(Self::Item, <I as IntoIterator>::Item) -> bool,
    I: IntoIterator, 

🔬 This is a nightly-only experimental API. (iter_order_by)

Determines if the elements of this Iterator are equal to those of another with respect to the specified equality function.

fn ne<I>(self, other: I) -> bool where
    I: IntoIterator,
    Self::Item: PartialEq<<I as IntoIterator>::Item>, 

Determines if the elements of this Iterator are unequal to those of another.

fn lt<I>(self, other: I) -> bool where
    I: IntoIterator,
    Self::Item: PartialOrd<<I as IntoIterator>::Item>, 

Determines if the elements of this Iterator are lexicographically less than those of another.

fn le<I>(self, other: I) -> bool where
    I: IntoIterator,
    Self::Item: PartialOrd<<I as IntoIterator>::Item>, 

Determines if the elements of this Iterator are lexicographically less or equal to those of another.

fn gt<I>(self, other: I) -> bool where
    I: IntoIterator,
    Self::Item: PartialOrd<<I as IntoIterator>::Item>, 

Determines if the elements of this Iterator are lexicographically greater than those of another.

fn ge<I>(self, other: I) -> bool where
    I: IntoIterator,
    Self::Item: PartialOrd<<I as IntoIterator>::Item>, 

Determines if the elements of this Iterator are lexicographically greater than or equal to those of another.

fn is_sorted(self) -> bool where
    Self::Item: PartialOrd<Self::Item>, 

🔬 This is a nightly-only experimental API. (is_sorted)

new API

Checks if the elements of this iterator are sorted.

fn is_sorted_by<F>(self, compare: F) -> bool where
    F: FnMut(&Self::Item, &Self::Item) -> Option<Ordering>, 

🔬 This is a nightly-only experimental API. (is_sorted)

new API

Checks if the elements of this iterator are sorted using the given comparator function.

fn is_sorted_by_key<F, K>(self, f: F) -> bool where
    F: FnMut(Self::Item) -> K,
    K: PartialOrd<K>, 

🔬 This is a nightly-only experimental API. (is_sorted)

new API

Checks if the elements of this iterator are sorted using the given key extraction function.

impl LowerHex for DisplayIdsFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for DisplayIdsFlags

type Output = DisplayIdsFlags

The resulting type after applying the ! operator.

fn not(self) -> DisplayIdsFlags

Returns the complement of this set of flags.

impl Octal for DisplayIdsFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for DisplayIdsFlags

fn cmp(&self, other: &DisplayIdsFlags) -> Ordering

This method returns an Ordering between self and other.

#[must_use]fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]fn clamp(self, min: Self, max: Self) -> Self

🔬 This is a nightly-only experimental API. (clamp)

Restrict a value to a certain interval.

impl PartialEq<DisplayIdsFlags> for DisplayIdsFlags

fn eq(&self, other: &DisplayIdsFlags) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &DisplayIdsFlags) -> bool

This method tests for !=.

impl PartialOrd<DisplayIdsFlags> for DisplayIdsFlags

fn partial_cmp(&self, other: &DisplayIdsFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &DisplayIdsFlags) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &DisplayIdsFlags) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &DisplayIdsFlags) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &DisplayIdsFlags) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Serialize for DisplayIdsFlags

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error> where
    __S: Serializer, 

Serialize this value into the given Serde serializer.

impl StructuralEq for DisplayIdsFlags

impl StructuralPartialEq for DisplayIdsFlags

impl Sub<DisplayIdsFlags> for DisplayIdsFlags

type Output = DisplayIdsFlags

The resulting type after applying the - operator.

fn sub(self, other: DisplayIdsFlags) -> DisplayIdsFlags

Returns the set difference of the two sets of flags.

impl SubAssign<DisplayIdsFlags> for DisplayIdsFlags

fn sub_assign(&mut self, other: DisplayIdsFlags)

Disables all flags enabled in the set.

impl UpperHex for DisplayIdsFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.