#[doc = r" Register block"]
#[repr(C)]
pub struct RegisterBlock {
_reserved0: [u8; 4usize],
#[doc = "0x04 - Stops PWM pulse generation on all channels at the end of current PWM period, and stops sequence playback"]
pub tasks_stop: TASKS_STOP,
#[doc = "0x08 - Description collection\\[0\\]: Loads the first PWM value on all enabled channels from sequence 0, and starts playing that sequence at the rate defined in SEQ\\[0\\]REFRESH and/or DECODER.MODE. Causes PWM generation to start it was not running."]
pub tasks_seqstart: [TASKS_SEQSTART; 2],
#[doc = "0x10 - Steps by one value in the current sequence on all enabled channels if DECODER.MODE=NextStep. Does not cause PWM generation to start it was not running."]
pub tasks_nextstep: TASKS_NEXTSTEP,
_reserved1: [u8; 240usize],
#[doc = "0x104 - Response to STOP task, emitted when PWM pulses are no longer generated"]
pub events_stopped: EVENTS_STOPPED,
#[doc = "0x108 - Description collection\\[0\\]: First PWM period started on sequence 0"]
pub events_seqstarted: [EVENTS_SEQSTARTED; 2],
#[doc = "0x110 - Description collection\\[0\\]: Emitted at end of every sequence 0, when last value from RAM has been applied to wave counter"]
pub events_seqend: [EVENTS_SEQEND; 2],
#[doc = "0x118 - Emitted at the end of each PWM period"]
pub events_pwmperiodend: EVENTS_PWMPERIODEND,
#[doc = "0x11c - Concatenated sequences have been played the amount of times defined in LOOP.CNT"]
pub events_loopsdone: EVENTS_LOOPSDONE,
_reserved2: [u8; 224usize],
#[doc = "0x200 - Shortcut register"]
pub shorts: SHORTS,
_reserved3: [u8; 252usize],
#[doc = "0x300 - Enable or disable interrupt"]
pub inten: INTEN,
#[doc = "0x304 - Enable interrupt"]
pub intenset: INTENSET,
#[doc = "0x308 - Disable interrupt"]
pub intenclr: INTENCLR,
_reserved4: [u8; 500usize],
#[doc = "0x500 - PWM module enable register"]
pub enable: ENABLE,
#[doc = "0x504 - Selects operating mode of the wave counter"]
pub mode: MODE,
#[doc = "0x508 - Value up to which the pulse generator counter counts"]
pub countertop: COUNTERTOP,
#[doc = "0x50c - Configuration for PWM_CLK"]
pub prescaler: PRESCALER,
#[doc = "0x510 - Configuration of the decoder"]
pub decoder: DECODER,
#[doc = "0x514 - Amount of playback of a loop"]
pub loop_: LOOP,
_reserved5: [u8; 8usize],
#[doc = "0x520 - Unspecified"]
pub seq0: SEQ,
_reserved6: [u8; 16usize],
#[doc = "0x540 - Unspecified"]
pub seq1: SEQ,
_reserved7: [u8; 16usize],
#[doc = "0x560 - Unspecified"]
pub psel: PSEL,
}
#[doc = r" Register block"]
#[repr(C)]
pub struct SEQ {
#[doc = "0x00 - Description cluster\\[0\\]: Beginning address in Data RAM of this sequence"]
pub ptr: self::seq::PTR,
#[doc = "0x04 - Description cluster\\[0\\]: Amount of values (duty cycles) in this sequence"]
pub cnt: self::seq::CNT,
#[doc = "0x08 - Description cluster\\[0\\]: Amount of additional PWM periods between samples loaded into compare register"]
pub refresh: self::seq::REFRESH,
#[doc = "0x0c - Description cluster\\[0\\]: Time added after the sequence"]
pub enddelay: self::seq::ENDDELAY,
}
#[doc = r" Register block"]
#[doc = "Unspecified"]
pub mod seq;
#[doc = r" Register block"]
#[repr(C)]
pub struct PSEL {
#[doc = "0x00 - Description collection\\[0\\]: Output pin select for PWM channel 0"]
pub out: [self::psel::OUT; 4],
}
#[doc = r" Register block"]
#[doc = "Unspecified"]
pub mod psel;
#[doc = "Stops PWM pulse generation on all channels at the end of current PWM period, and stops sequence playback"]
pub struct TASKS_STOP {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Stops PWM pulse generation on all channels at the end of current PWM period, and stops sequence playback"]
pub mod tasks_stop;
#[doc = "Description collection\\[0\\]: Loads the first PWM value on all enabled channels from sequence 0, and starts playing that sequence at the rate defined in SEQ\\[0\\]REFRESH and/or DECODER.MODE. Causes PWM generation to start it was not running."]
pub struct TASKS_SEQSTART {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Description collection\\[0\\]: Loads the first PWM value on all enabled channels from sequence 0, and starts playing that sequence at the rate defined in SEQ\\[0\\]REFRESH and/or DECODER.MODE. Causes PWM generation to start it was not running."]
pub mod tasks_seqstart;
#[doc = "Steps by one value in the current sequence on all enabled channels if DECODER.MODE=NextStep. Does not cause PWM generation to start it was not running."]
pub struct TASKS_NEXTSTEP {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Steps by one value in the current sequence on all enabled channels if DECODER.MODE=NextStep. Does not cause PWM generation to start it was not running."]
pub mod tasks_nextstep;
#[doc = "Response to STOP task, emitted when PWM pulses are no longer generated"]
pub struct EVENTS_STOPPED {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Response to STOP task, emitted when PWM pulses are no longer generated"]
pub mod events_stopped;
#[doc = "Description collection\\[0\\]: First PWM period started on sequence 0"]
pub struct EVENTS_SEQSTARTED {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Description collection\\[0\\]: First PWM period started on sequence 0"]
pub mod events_seqstarted;
#[doc = "Description collection\\[0\\]: Emitted at end of every sequence 0, when last value from RAM has been applied to wave counter"]
pub struct EVENTS_SEQEND {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Description collection\\[0\\]: Emitted at end of every sequence 0, when last value from RAM has been applied to wave counter"]
pub mod events_seqend;
#[doc = "Emitted at the end of each PWM period"]
pub struct EVENTS_PWMPERIODEND {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Emitted at the end of each PWM period"]
pub mod events_pwmperiodend;
#[doc = "Concatenated sequences have been played the amount of times defined in LOOP.CNT"]
pub struct EVENTS_LOOPSDONE {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Concatenated sequences have been played the amount of times defined in LOOP.CNT"]
pub mod events_loopsdone;
#[doc = "Shortcut register"]
pub struct SHORTS {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Shortcut register"]
pub mod shorts;
#[doc = "Enable or disable interrupt"]
pub struct INTEN {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Enable or disable interrupt"]
pub mod inten;
#[doc = "Enable interrupt"]
pub struct INTENSET {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Enable interrupt"]
pub mod intenset;
#[doc = "Disable interrupt"]
pub struct INTENCLR {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Disable interrupt"]
pub mod intenclr;
#[doc = "PWM module enable register"]
pub struct ENABLE {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "PWM module enable register"]
pub mod enable;
#[doc = "Selects operating mode of the wave counter"]
pub struct MODE {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Selects operating mode of the wave counter"]
pub mod mode;
#[doc = "Value up to which the pulse generator counter counts"]
pub struct COUNTERTOP {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Value up to which the pulse generator counter counts"]
pub mod countertop;
#[doc = "Configuration for PWM_CLK"]
pub struct PRESCALER {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Configuration for PWM_CLK"]
pub mod prescaler;
#[doc = "Configuration of the decoder"]
pub struct DECODER {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Configuration of the decoder"]
pub mod decoder;
#[doc = "Amount of playback of a loop"]
pub struct LOOP {
register: ::vcell::VolatileCell<u32>,
}
#[doc = "Amount of playback of a loop"]
pub mod loop_;