[−][src]Struct nrf52832_hal::nrf52832_pac::radio::dacnf::W
Value to write to the register
Methods
impl W
[src]
impl W
pub fn reset_value() -> W
[src]
pub fn reset_value() -> W
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut W
[src]
pub unsafe fn bits(&mut self, bits: u32) -> &mut W
Writes raw bits to the register
pub fn ena0(&mut self) -> _ENA0W
[src]
pub fn ena0(&mut self) -> _ENA0W
Bit 0 - Enable or disable device address matching using device address 0
pub fn ena1(&mut self) -> _ENA1W
[src]
pub fn ena1(&mut self) -> _ENA1W
Bit 1 - Enable or disable device address matching using device address 1
pub fn ena2(&mut self) -> _ENA2W
[src]
pub fn ena2(&mut self) -> _ENA2W
Bit 2 - Enable or disable device address matching using device address 2
pub fn ena3(&mut self) -> _ENA3W
[src]
pub fn ena3(&mut self) -> _ENA3W
Bit 3 - Enable or disable device address matching using device address 3
pub fn ena4(&mut self) -> _ENA4W
[src]
pub fn ena4(&mut self) -> _ENA4W
Bit 4 - Enable or disable device address matching using device address 4
pub fn ena5(&mut self) -> _ENA5W
[src]
pub fn ena5(&mut self) -> _ENA5W
Bit 5 - Enable or disable device address matching using device address 5
pub fn ena6(&mut self) -> _ENA6W
[src]
pub fn ena6(&mut self) -> _ENA6W
Bit 6 - Enable or disable device address matching using device address 6
pub fn ena7(&mut self) -> _ENA7W
[src]
pub fn ena7(&mut self) -> _ENA7W
Bit 7 - Enable or disable device address matching using device address 7
pub fn txadd0(&mut self) -> _TXADD0W
[src]
pub fn txadd0(&mut self) -> _TXADD0W
Bit 8 - TxAdd for device address 0
pub fn txadd1(&mut self) -> _TXADD1W
[src]
pub fn txadd1(&mut self) -> _TXADD1W
Bit 9 - TxAdd for device address 1
pub fn txadd2(&mut self) -> _TXADD2W
[src]
pub fn txadd2(&mut self) -> _TXADD2W
Bit 10 - TxAdd for device address 2
pub fn txadd3(&mut self) -> _TXADD3W
[src]
pub fn txadd3(&mut self) -> _TXADD3W
Bit 11 - TxAdd for device address 3
pub fn txadd4(&mut self) -> _TXADD4W
[src]
pub fn txadd4(&mut self) -> _TXADD4W
Bit 12 - TxAdd for device address 4
pub fn txadd5(&mut self) -> _TXADD5W
[src]
pub fn txadd5(&mut self) -> _TXADD5W
Bit 13 - TxAdd for device address 5
pub fn txadd6(&mut self) -> _TXADD6W
[src]
pub fn txadd6(&mut self) -> _TXADD6W
Bit 14 - TxAdd for device address 6
pub fn txadd7(&mut self) -> _TXADD7W
[src]
pub fn txadd7(&mut self) -> _TXADD7W
Bit 15 - TxAdd for device address 7
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more