Struct nrf52811_pac::ppi::chenset::W

pub struct W(_);

Register CHENSET writer

Implementations

impl W

pub fn ch0(&mut self) -> CH0_W<'_>

Bit 0 - Channel 0 enable set register. Writing ‘0’ has no effect

pub fn ch1(&mut self) -> CH1_W<'_>

Bit 1 - Channel 1 enable set register. Writing ‘0’ has no effect

pub fn ch2(&mut self) -> CH2_W<'_>

Bit 2 - Channel 2 enable set register. Writing ‘0’ has no effect

pub fn ch3(&mut self) -> CH3_W<'_>

Bit 3 - Channel 3 enable set register. Writing ‘0’ has no effect

pub fn ch4(&mut self) -> CH4_W<'_>

Bit 4 - Channel 4 enable set register. Writing ‘0’ has no effect

pub fn ch5(&mut self) -> CH5_W<'_>

Bit 5 - Channel 5 enable set register. Writing ‘0’ has no effect

pub fn ch6(&mut self) -> CH6_W<'_>

Bit 6 - Channel 6 enable set register. Writing ‘0’ has no effect

pub fn ch7(&mut self) -> CH7_W<'_>

Bit 7 - Channel 7 enable set register. Writing ‘0’ has no effect

pub fn ch8(&mut self) -> CH8_W<'_>

Bit 8 - Channel 8 enable set register. Writing ‘0’ has no effect

pub fn ch9(&mut self) -> CH9_W<'_>

Bit 9 - Channel 9 enable set register. Writing ‘0’ has no effect

pub fn ch10(&mut self) -> CH10_W<'_>

Bit 10 - Channel 10 enable set register. Writing ‘0’ has no effect

pub fn ch11(&mut self) -> CH11_W<'_>

Bit 11 - Channel 11 enable set register. Writing ‘0’ has no effect

pub fn ch12(&mut self) -> CH12_W<'_>

Bit 12 - Channel 12 enable set register. Writing ‘0’ has no effect

pub fn ch13(&mut self) -> CH13_W<'_>

Bit 13 - Channel 13 enable set register. Writing ‘0’ has no effect

pub fn ch14(&mut self) -> CH14_W<'_>

Bit 14 - Channel 14 enable set register. Writing ‘0’ has no effect

pub fn ch15(&mut self) -> CH15_W<'_>

Bit 15 - Channel 15 enable set register. Writing ‘0’ has no effect

pub fn ch16(&mut self) -> CH16_W<'_>

Bit 16 - Channel 16 enable set register. Writing ‘0’ has no effect

pub fn ch17(&mut self) -> CH17_W<'_>

Bit 17 - Channel 17 enable set register. Writing ‘0’ has no effect

pub fn ch18(&mut self) -> CH18_W<'_>

Bit 18 - Channel 18 enable set register. Writing ‘0’ has no effect

pub fn ch19(&mut self) -> CH19_W<'_>

Bit 19 - Channel 19 enable set register. Writing ‘0’ has no effect

pub fn ch20(&mut self) -> CH20_W<'_>

Bit 20 - Channel 20 enable set register. Writing ‘0’ has no effect

pub fn ch21(&mut self) -> CH21_W<'_>

Bit 21 - Channel 21 enable set register. Writing ‘0’ has no effect

pub fn ch22(&mut self) -> CH22_W<'_>

Bit 22 - Channel 22 enable set register. Writing ‘0’ has no effect

pub fn ch23(&mut self) -> CH23_W<'_>

Bit 23 - Channel 23 enable set register. Writing ‘0’ has no effect

pub fn ch24(&mut self) -> CH24_W<'_>

Bit 24 - Channel 24 enable set register. Writing ‘0’ has no effect

pub fn ch25(&mut self) -> CH25_W<'_>

Bit 25 - Channel 25 enable set register. Writing ‘0’ has no effect

pub fn ch26(&mut self) -> CH26_W<'_>

Bit 26 - Channel 26 enable set register. Writing ‘0’ has no effect

pub fn ch27(&mut self) -> CH27_W<'_>

Bit 27 - Channel 27 enable set register. Writing ‘0’ has no effect

pub fn ch28(&mut self) -> CH28_W<'_>

Bit 28 - Channel 28 enable set register. Writing ‘0’ has no effect

pub fn ch29(&mut self) -> CH29_W<'_>

Bit 29 - Channel 29 enable set register. Writing ‘0’ has no effect

pub fn ch30(&mut self) -> CH30_W<'_>

Bit 30 - Channel 30 enable set register. Writing ‘0’ has no effect

pub fn ch31(&mut self) -> CH31_W<'_>

Bit 31 - Channel 31 enable set register. Writing ‘0’ has no effect

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<CHENSET_SPEC>>

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Trait Implementations

impl Deref for W

type Target = W<CHENSET_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl From<W<CHENSET_SPEC>> for W

fn from(writer: W<CHENSET_SPEC>) -> Self

Performs the conversion.