[−][src]Module nrf52810_pac::radio
2.4 GHz Radio
Modules
base0 | Base address 0 |
base1 | Base address 1 |
bcc | Bit counter compare |
crccnf | CRC configuration |
crcinit | CRC initial value |
crcpoly | CRC polynomial |
crcstatus | CRC status |
dab | Description collection: Device address base segment n |
dacnf | Device address match configuration |
dai | Device address match index |
dap | Description collection: Device address prefix n |
datawhiteiv | Data whitening initial value |
events_address | Address sent or received |
events_bcmatch | Bit counter reached bit count value. |
events_crcerror | Packet received with CRC error |
events_crcok | Packet received with CRC ok |
events_devmatch | A device address match occurred on the last received packet |
events_devmiss | No device address match occurred on the last received packet |
events_disabled | RADIO has been disabled |
events_end | Packet sent or received |
events_payload | Packet payload sent or received |
events_ready | RADIO has ramped up and is ready to be started |
events_rssiend | Sampling of receive signal strength complete. |
frequency | Frequency |
intenclr | Disable interrupt |
intenset | Enable interrupt |
mode | Data rate and modulation |
modecnf0 | Radio mode configuration register 0 |
packetptr | Packet pointer |
pcnf0 | Packet configuration register 0 |
pcnf1 | Packet configuration register 1 |
power | Peripheral power control |
prefix0 | Prefixes bytes for logical addresses 0-3 |
prefix1 | Prefixes bytes for logical addresses 4-7 |
rssisample | RSSI sample |
rxaddresses | Receive address select |
rxcrc | CRC field of previously received packet |
rxmatch | Received address |
shorts | Shortcuts between local events and tasks |
state | Current radio state |
tasks_bcstart | Start the bit counter |
tasks_bcstop | Stop the bit counter |
tasks_disable | Disable RADIO |
tasks_rssistart | Start the RSSI and take one single sample of the receive signal strength. |
tasks_rssistop | Stop the RSSI measurement |
tasks_rxen | Enable RADIO in RX mode |
tasks_start | Start RADIO |
tasks_stop | Stop RADIO |
tasks_txen | Enable RADIO in TX mode |
tifs | Inter Frame Spacing in us |
txaddress | Transmit address select |
txpower | Output power |
Structs
BASE0 | Base address 0 |
BASE1 | Base address 1 |
BCC | Bit counter compare |
CRCCNF | CRC configuration |
CRCINIT | CRC initial value |
CRCPOLY | CRC polynomial |
CRCSTATUS | CRC status |
DAB | Description collection: Device address base segment n |
DACNF | Device address match configuration |
DAI | Device address match index |
DAP | Description collection: Device address prefix n |
DATAWHITEIV | Data whitening initial value |
EVENTS_ADDRESS | Address sent or received |
EVENTS_BCMATCH | Bit counter reached bit count value. |
EVENTS_CRCERROR | Packet received with CRC error |
EVENTS_CRCOK | Packet received with CRC ok |
EVENTS_DEVMATCH | A device address match occurred on the last received packet |
EVENTS_DEVMISS | No device address match occurred on the last received packet |
EVENTS_DISABLED | RADIO has been disabled |
EVENTS_END | Packet sent or received |
EVENTS_PAYLOAD | Packet payload sent or received |
EVENTS_READY | RADIO has ramped up and is ready to be started |
EVENTS_RSSIEND | Sampling of receive signal strength complete. |
FREQUENCY | Frequency |
INTENCLR | Disable interrupt |
INTENSET | Enable interrupt |
MODE | Data rate and modulation |
MODECNF0 | Radio mode configuration register 0 |
PACKETPTR | Packet pointer |
PCNF0 | Packet configuration register 0 |
PCNF1 | Packet configuration register 1 |
POWER | Peripheral power control |
PREFIX0 | Prefixes bytes for logical addresses 0-3 |
PREFIX1 | Prefixes bytes for logical addresses 4-7 |
RSSISAMPLE | RSSI sample |
RXADDRESSES | Receive address select |
RXCRC | CRC field of previously received packet |
RXMATCH | Received address |
RegisterBlock | Register block |
SHORTS | Shortcuts between local events and tasks |
STATE | Current radio state |
TASKS_BCSTART | Start the bit counter |
TASKS_BCSTOP | Stop the bit counter |
TASKS_DISABLE | Disable RADIO |
TASKS_RSSISTART | Start the RSSI and take one single sample of the receive signal strength. |
TASKS_RSSISTOP | Stop the RSSI measurement |
TASKS_RXEN | Enable RADIO in RX mode |
TASKS_START | Start RADIO |
TASKS_STOP | Stop RADIO |
TASKS_TXEN | Enable RADIO in TX mode |
TIFS | Inter Frame Spacing in us |
TXADDRESS | Transmit address select |
TXPOWER | Output power |