Module nrf51::radio

The radio.

Modules

base0	Radio base address 0. Decision point: START task.
base1	Radio base address 1. Decision point: START task.
bcc	Bit counter compare.
crccnf	CRC configuration.
crcinit	CRC initial value.
crcpoly	CRC polynomial.
crcstatus	CRC status of received packet.
dab	Device address base segment.
dacnf	Device address match configuration.
dai	Device address match index.
dap	Device address prefix.
datawhiteiv	Data whitening initial value.
events_address	Address event.
events_bcmatch	Bit counter reached bit count value specified in BCC register.
events_devmatch	A device address match occurred on the last received packet.
events_devmiss	No device address match occurred on the last received packet.
events_disabled	Disable event.
events_end	End event.
events_payload	Payload event.
events_ready	Ready event.
events_rssiend	Sampling of the receive signal strength complete. A new RSSI sample is ready for readout at the RSSISAMPLE register.
frequency	Frequency.
intenclr	Interrupt enable clear register.
intenset	Interrupt enable set register.
mode	Data rate and modulation.
override0	Trim value override register 0.
override1	Trim value override register 1.
override2	Trim value override register 2.
override3	Trim value override register 3.
override4	Trim value override register 4.
packetptr	Packet pointer. Decision point: START task.
pcnf0	Packet configuration 0.
pcnf1	Packet configuration 1.
power	Peripheral power control.
prefix0	Prefixes bytes for logical addresses 0 to 3.
prefix1	Prefixes bytes for logical addresses 4 to 7.
rssisample	RSSI sample.
rxaddresses	Receive address select.
rxcrc	Received CRC.
rxmatch	Received address.
shorts	Shortcuts for the radio.
state	Current radio state.
tasks_bcstart	Start the bit counter.
tasks_bcstop	Stop the bit counter.
tasks_disable	Disable radio.
tasks_rssistart	Start the RSSI and take one sample of the receive signal strength.
tasks_rssistop	Stop the RSSI measurement.
tasks_rxen	Enable radio in RX mode.
tasks_start	Start radio.
tasks_stop	Stop radio.
tasks_txen	Enable radio in TX mode.
test	Test features enable register.
tifs	Inter Frame Spacing in microseconds.
txaddress	Transmit address select.
txpower	Output power.

Structs

BASE0	Radio base address 0. Decision point: START task.
BASE1	Radio base address 1. Decision point: START task.
BCC	Bit counter compare.
CRCCNF	CRC configuration.
CRCINIT	CRC initial value.
CRCPOLY	CRC polynomial.
CRCSTATUS	CRC status of received packet.
DAB	Device address base segment.
DACNF	Device address match configuration.
DAI	Device address match index.
DAP	Device address prefix.
DATAWHITEIV	Data whitening initial value.
EVENTS_ADDRESS	Address event.
EVENTS_BCMATCH	Bit counter reached bit count value specified in BCC register.
EVENTS_DEVMATCH	A device address match occurred on the last received packet.
EVENTS_DEVMISS	No device address match occurred on the last received packet.
EVENTS_DISABLED	Disable event.
EVENTS_END	End event.
EVENTS_PAYLOAD	Payload event.
EVENTS_READY	Ready event.
EVENTS_RSSIEND	Sampling of the receive signal strength complete. A new RSSI sample is ready for readout at the RSSISAMPLE register.
FREQUENCY	Frequency.
INTENCLR	Interrupt enable clear register.
INTENSET	Interrupt enable set register.
MODE	Data rate and modulation.
OVERRIDE0	Trim value override register 0.
OVERRIDE1	Trim value override register 1.
OVERRIDE2	Trim value override register 2.
OVERRIDE3	Trim value override register 3.
OVERRIDE4	Trim value override register 4.
PACKETPTR	Packet pointer. Decision point: START task.
PCNF0	Packet configuration 0.
PCNF1	Packet configuration 1.
POWER	Peripheral power control.
PREFIX0	Prefixes bytes for logical addresses 0 to 3.
PREFIX1	Prefixes bytes for logical addresses 4 to 7.
RSSISAMPLE	RSSI sample.
RXADDRESSES	Receive address select.
RXCRC	Received CRC.
RXMATCH	Received address.
RegisterBlock	Register block
SHORTS	Shortcuts for the radio.
STATE	Current radio state.
TASKS_BCSTART	Start the bit counter.
TASKS_BCSTOP	Stop the bit counter.
TASKS_DISABLE	Disable radio.
TASKS_RSSISTART	Start the RSSI and take one sample of the receive signal strength.
TASKS_RSSISTOP	Stop the RSSI measurement.
TASKS_RXEN	Enable radio in RX mode.
TASKS_START	Start radio.
TASKS_STOP	Stop radio.
TASKS_TXEN	Enable radio in TX mode.
TEST	Test features enable register.
TIFS	Inter Frame Spacing in microseconds.
TXADDRESS	Transmit address select.
TXPOWER	Output power.