[−]Struct nannou::wgpu::BackendBit
Methods
impl BackendBit
pub const VULKAN: BackendBit
pub const GL: BackendBit
pub const METAL: BackendBit
pub const DX12: BackendBit
pub const DX11: BackendBit
pub const PRIMARY: BackendBit
Vulkan + METAL + DX12
pub const SECONDARY: BackendBit
OpenGL + DX11
pub const fn empty() -> BackendBit
Returns an empty set of flags
pub const fn all() -> BackendBit
Returns the set containing all flags.
pub const fn bits(&self) -> u32
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: u32) -> Option<BackendBit>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub const fn from_bits_truncate(bits: u32) -> BackendBit
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub const unsafe fn from_bits_unchecked(bits: u32) -> BackendBit
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
pub const fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub const fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub const fn intersects(&self, other: BackendBit) -> bool
Returns true
if there are flags common to both self
and other
.
pub const fn contains(&self, other: BackendBit) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: BackendBit)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: BackendBit)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: BackendBit)
Toggles the specified flags in-place.
pub fn set(&mut self, other: BackendBit, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Binary for BackendBit
impl BitAnd<BackendBit> for BackendBit
type Output = BackendBit
The resulting type after applying the &
operator.
fn bitand(self, other: BackendBit) -> BackendBit
Returns the intersection between the two sets of flags.
impl BitAndAssign<BackendBit> for BackendBit
fn bitand_assign(&mut self, other: BackendBit)
Disables all flags disabled in the set.
impl BitOr<BackendBit> for BackendBit
type Output = BackendBit
The resulting type after applying the |
operator.
fn bitor(self, other: BackendBit) -> BackendBit
Returns the union of the two sets of flags.
impl BitOrAssign<BackendBit> for BackendBit
fn bitor_assign(&mut self, other: BackendBit)
Adds the set of flags.
impl BitXor<BackendBit> for BackendBit
type Output = BackendBit
The resulting type after applying the ^
operator.
fn bitxor(self, other: BackendBit) -> BackendBit
Returns the left flags, but with all the right flags toggled.
impl BitXorAssign<BackendBit> for BackendBit
fn bitxor_assign(&mut self, other: BackendBit)
Toggles the set of flags.
impl Clone for BackendBit
fn clone(&self) -> BackendBit
fn clone_from(&mut self, source: &Self)
1.0.0[src]
impl Copy for BackendBit
impl Debug for BackendBit
impl Eq for BackendBit
impl Extend<BackendBit> for BackendBit
fn extend<T>(&mut self, iterator: T) where
T: IntoIterator<Item = BackendBit>,
T: IntoIterator<Item = BackendBit>,
impl From<Backend> for BackendBit
fn from(backend: Backend) -> BackendBit
impl FromIterator<BackendBit> for BackendBit
fn from_iter<T>(iterator: T) -> BackendBit where
T: IntoIterator<Item = BackendBit>,
T: IntoIterator<Item = BackendBit>,
impl Hash for BackendBit
fn hash<__H>(&self, state: &mut __H) where
__H: Hasher,
__H: Hasher,
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
impl LowerHex for BackendBit
impl Not for BackendBit
type Output = BackendBit
The resulting type after applying the !
operator.
fn not(self) -> BackendBit
Returns the complement of this set of flags.
impl Octal for BackendBit
impl Ord for BackendBit
fn cmp(&self, other: &BackendBit) -> Ordering
#[must_use]
fn max(self, other: Self) -> Self
1.21.0[src]
#[must_use]
fn min(self, other: Self) -> Self
1.21.0[src]
#[must_use]
fn clamp(self, min: Self, max: Self) -> Self
[src]
impl PartialEq<BackendBit> for BackendBit
fn eq(&self, other: &BackendBit) -> bool
fn ne(&self, other: &BackendBit) -> bool
impl PartialOrd<BackendBit> for BackendBit
fn partial_cmp(&self, other: &BackendBit) -> Option<Ordering>
fn lt(&self, other: &BackendBit) -> bool
fn le(&self, other: &BackendBit) -> bool
fn gt(&self, other: &BackendBit) -> bool
fn ge(&self, other: &BackendBit) -> bool
impl StructuralEq for BackendBit
impl StructuralPartialEq for BackendBit
impl Sub<BackendBit> for BackendBit
type Output = BackendBit
The resulting type after applying the -
operator.
fn sub(self, other: BackendBit) -> BackendBit
Returns the set difference of the two sets of flags.
impl SubAssign<BackendBit> for BackendBit
fn sub_assign(&mut self, other: BackendBit)
Disables all flags enabled in the set.
impl UpperHex for BackendBit
Auto Trait Implementations
impl RefUnwindSafe for BackendBit
impl Send for BackendBit
impl Sync for BackendBit
impl Unpin for BackendBit
impl UnwindSafe for BackendBit
Blanket Implementations
impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S where
D: AdaptFrom<S, Swp, Dwp, T>,
Dwp: WhitePoint,
Swp: WhitePoint,
T: Component + Float,
[src]
D: AdaptFrom<S, Swp, Dwp, T>,
Dwp: WhitePoint,
Swp: WhitePoint,
T: Component + Float,
fn adapt_into_using<M>(self, method: M) -> D where
M: TransformMatrix<Swp, Dwp, T>,
[src]
M: TransformMatrix<Swp, Dwp, T>,
fn adapt_into(self) -> D
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T, U> ConvertInto<U> for T where
U: ConvertFrom<T>,
[src]
U: ConvertFrom<T>,
fn convert_into(self) -> U
[src]
fn convert_unclamped_into(self) -> U
[src]
fn try_convert_into(self) -> Result<U, OutOfBounds<U>>
[src]
impl<Q, K> Equivalent<K> for Q where
K: Borrow<Q> + ?Sized,
Q: Eq + ?Sized,
[src]
K: Borrow<Q> + ?Sized,
Q: Eq + ?Sized,
fn equivalent(&self, key: &K) -> bool
[src]
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> NodeId for T where
T: 'static + Copy + Clone + PartialEq<T> + Eq + Hash + Send,
[src]
T: 'static + Copy + Clone + PartialEq<T> + Eq + Hash + Send,
impl<N> NodeTrait for N where
N: Copy + Ord + Hash,
[src]
N: Copy + Ord + Hash,
impl<T> SetParameter for T
fn set<T>(&mut self, value: T) -> <T as Parameter<Self>>::Result where
T: Parameter<Self>,
T: Parameter<Self>,
impl<T> SetParameter for T
fn set<T>(&mut self, value: T) -> <T as Parameter<Self>>::Result where
T: Parameter<Self>,
T: Parameter<Self>,
impl<T> Style for T where
T: Any + Debug + PartialEq<T>,
[src]
T: Any + Debug + PartialEq<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
fn to_owned(&self) -> T
[src]
fn clone_into(&self, target: &mut T)
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
V: MultiLane<T>,