Struct multipart::server::MultipartData [−][src]
pub struct MultipartData<M> { /* fields omitted */ }
Expand description
The data of a field in a multipart/form-data
request.
You can read it to EOF, or use the save()
adaptor to save it to disk/memory.
Implementations
impl<M> MultipartData<M> where
M: ReadEntry,
[src]
impl<M> MultipartData<M> where
M: ReadEntry,
[src]pub fn save(&mut self) -> SaveBuilder<&mut Self>
[src]
pub fn save(&mut self) -> SaveBuilder<&mut Self>
[src]Get a builder type which can save the field with or without a size limit.
pub fn into_inner(self) -> M
[src]
pub fn into_inner(self) -> M
[src]Take the inner Multipart
or &mut Multipart
pub fn set_min_buf_size(&mut self, min_buf_size: usize)
[src]
pub fn set_min_buf_size(&mut self, min_buf_size: usize)
[src]Set the minimum buffer size that BufRead::fill_buf(self)
will return
until the end of the stream is reached. Set this as small as you can tolerate
to minimize read()
calls (read()
won’t be called again until the buffer
is smaller than this).
This value is reset between fields.
Trait Implementations
impl<M: ReadEntry> BufRead for MultipartData<M>
[src]
impl<M: ReadEntry> BufRead for MultipartData<M>
[src]In this implementation, fill_buf()
can return more data with each call.
Use set_min_buf_size()
if you require a minimum buffer length.
fn fill_buf(&mut self) -> Result<&[u8]>
[src]
fn fill_buf(&mut self) -> Result<&[u8]>
[src]Returns the contents of the internal buffer, filling it with more data from the inner reader if it is empty. Read more
fn consume(&mut self, amt: usize)
[src]
fn consume(&mut self, amt: usize)
[src]Tells this buffer that amt
bytes have been consumed from the buffer,
so they should no longer be returned in calls to read
. Read more
fn read_until(
&mut self,
byte: u8,
buf: &mut Vec<u8, Global>
) -> Result<usize, Error>
1.0.0[src]
fn read_until(
&mut self,
byte: u8,
buf: &mut Vec<u8, Global>
) -> Result<usize, Error>
1.0.0[src]Read all bytes into buf
until the delimiter byte
or EOF is reached. Read more
fn read_line(&mut self, buf: &mut String) -> Result<usize, Error>
1.0.0[src]
fn read_line(&mut self, buf: &mut String) -> Result<usize, Error>
1.0.0[src]Read all bytes until a newline (the 0xA
byte) is reached, and append
them to the provided buffer. Read more
impl<M: Debug> Debug for MultipartData<M>
[src]
impl<M: Debug> Debug for MultipartData<M>
[src]impl<M: ReadEntry> Read for MultipartData<M>
[src]
impl<M: ReadEntry> Read for MultipartData<M>
[src]fn read(&mut self, buf: &mut [u8]) -> Result<usize>
[src]
fn read(&mut self, buf: &mut [u8]) -> Result<usize>
[src]Pull some bytes from this source into the specified buffer, returning how many bytes were read. Read more
fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize, Error>
1.36.0[src]
fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize, Error>
1.36.0[src]Like read
, except that it reads into a slice of buffers. Read more
fn is_read_vectored(&self) -> bool
[src]
fn is_read_vectored(&self) -> bool
[src]can_vector
)Determines if this Read
er has an efficient read_vectored
implementation. Read more
unsafe fn initializer(&self) -> Initializer
[src]
unsafe fn initializer(&self) -> Initializer
[src]read_initializer
)Determines if this Read
er can work with buffers of uninitialized
memory. Read more
fn read_to_end(&mut self, buf: &mut Vec<u8, Global>) -> Result<usize, Error>
1.0.0[src]
fn read_to_end(&mut self, buf: &mut Vec<u8, Global>) -> Result<usize, Error>
1.0.0[src]Read all bytes until EOF in this source, placing them into buf
. Read more
fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>
1.0.0[src]
fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>
1.0.0[src]Read all bytes until EOF in this source, appending them to buf
. Read more
fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>
1.6.0[src]
fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>
1.6.0[src]Read the exact number of bytes required to fill buf
. Read more
fn by_ref(&mut self) -> &mut Self
1.0.0[src]
fn by_ref(&mut self) -> &mut Self
1.0.0[src]Creates a “by reference” adaptor for this instance of Read
. Read more
Auto Trait Implementations
impl<M> RefUnwindSafe for MultipartData<M> where
M: RefUnwindSafe,
M: RefUnwindSafe,
impl<M> Send for MultipartData<M> where
M: Send,
M: Send,
impl<M> Sync for MultipartData<M> where
M: Sync,
M: Sync,
impl<M> Unpin for MultipartData<M> where
M: Unpin,
M: Unpin,
impl<M> UnwindSafe for MultipartData<M> where
M: UnwindSafe,
M: UnwindSafe,
Blanket Implementations
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]pub fn borrow_mut(&mut self) -> &mut T
[src]
pub fn borrow_mut(&mut self) -> &mut T
[src]Mutably borrows from an owned value. Read more
impl<R> ReadBytesExt for R where
R: Read + ?Sized,
impl<R> ReadBytesExt for R where
R: Read + ?Sized,
fn read_u8(&mut self) -> Result<u8, Error>
fn read_u8(&mut self) -> Result<u8, Error>
Reads an unsigned 8 bit integer from the underlying reader. Read more
fn read_i8(&mut self) -> Result<i8, Error>
fn read_i8(&mut self) -> Result<i8, Error>
Reads a signed 8 bit integer from the underlying reader. Read more
fn read_u16<T>(&mut self) -> Result<u16, Error> where
T: ByteOrder,
fn read_u16<T>(&mut self) -> Result<u16, Error> where
T: ByteOrder,
Reads an unsigned 16 bit integer from the underlying reader. Read more
fn read_i16<T>(&mut self) -> Result<i16, Error> where
T: ByteOrder,
fn read_i16<T>(&mut self) -> Result<i16, Error> where
T: ByteOrder,
Reads a signed 16 bit integer from the underlying reader. Read more
fn read_u24<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,
fn read_u24<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,
Reads an unsigned 24 bit integer from the underlying reader. Read more
fn read_i24<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,
fn read_i24<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,
Reads a signed 24 bit integer from the underlying reader. Read more
fn read_u32<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,
fn read_u32<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,
Reads an unsigned 32 bit integer from the underlying reader. Read more
fn read_i32<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,
fn read_i32<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,
Reads a signed 32 bit integer from the underlying reader. Read more
fn read_u48<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,
fn read_u48<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,
Reads an unsigned 48 bit integer from the underlying reader. Read more
fn read_i48<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,
fn read_i48<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,
Reads a signed 48 bit integer from the underlying reader. Read more
fn read_u64<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,
fn read_u64<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,
Reads an unsigned 64 bit integer from the underlying reader. Read more
fn read_i64<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,
fn read_i64<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,
Reads a signed 64 bit integer from the underlying reader. Read more
fn read_u128<T>(&mut self) -> Result<u128, Error> where
T: ByteOrder,
fn read_u128<T>(&mut self) -> Result<u128, Error> where
T: ByteOrder,
Reads an unsigned 128 bit integer from the underlying reader. Read more
fn read_i128<T>(&mut self) -> Result<i128, Error> where
T: ByteOrder,
fn read_i128<T>(&mut self) -> Result<i128, Error> where
T: ByteOrder,
Reads a signed 128 bit integer from the underlying reader. Read more
fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where
T: ByteOrder,
fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where
T: ByteOrder,
Reads an unsigned n-bytes integer from the underlying reader. Read more
fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where
T: ByteOrder,
fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where
T: ByteOrder,
Reads a signed n-bytes integer from the underlying reader. Read more
fn read_uint128<T>(&mut self, nbytes: usize) -> Result<u128, Error> where
T: ByteOrder,
fn read_uint128<T>(&mut self, nbytes: usize) -> Result<u128, Error> where
T: ByteOrder,
Reads an unsigned n-bytes integer from the underlying reader.
fn read_int128<T>(&mut self, nbytes: usize) -> Result<i128, Error> where
T: ByteOrder,
fn read_int128<T>(&mut self, nbytes: usize) -> Result<i128, Error> where
T: ByteOrder,
Reads a signed n-bytes integer from the underlying reader.
fn read_f32<T>(&mut self) -> Result<f32, Error> where
T: ByteOrder,
fn read_f32<T>(&mut self) -> Result<f32, Error> where
T: ByteOrder,
Reads a IEEE754 single-precision (4 bytes) floating point number from the underlying reader. Read more
fn read_f64<T>(&mut self) -> Result<f64, Error> where
T: ByteOrder,
fn read_f64<T>(&mut self) -> Result<f64, Error> where
T: ByteOrder,
Reads a IEEE754 double-precision (8 bytes) floating point number from the underlying reader. Read more
fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error> where
T: ByteOrder,
fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of unsigned 16 bit integers from the underlying reader. Read more
fn read_u32_into<T>(&mut self, dst: &mut [u32]) -> Result<(), Error> where
T: ByteOrder,
fn read_u32_into<T>(&mut self, dst: &mut [u32]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of unsigned 32 bit integers from the underlying reader. Read more
fn read_u64_into<T>(&mut self, dst: &mut [u64]) -> Result<(), Error> where
T: ByteOrder,
fn read_u64_into<T>(&mut self, dst: &mut [u64]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of unsigned 64 bit integers from the underlying reader. Read more
fn read_u128_into<T>(&mut self, dst: &mut [u128]) -> Result<(), Error> where
T: ByteOrder,
fn read_u128_into<T>(&mut self, dst: &mut [u128]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of unsigned 128 bit integers from the underlying reader. Read more
fn read_i8_into(&mut self, dst: &mut [i8]) -> Result<(), Error>
fn read_i8_into(&mut self, dst: &mut [i8]) -> Result<(), Error>
Reads a sequence of signed 8 bit integers from the underlying reader. Read more
fn read_i16_into<T>(&mut self, dst: &mut [i16]) -> Result<(), Error> where
T: ByteOrder,
fn read_i16_into<T>(&mut self, dst: &mut [i16]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of signed 16 bit integers from the underlying reader. Read more
fn read_i32_into<T>(&mut self, dst: &mut [i32]) -> Result<(), Error> where
T: ByteOrder,
fn read_i32_into<T>(&mut self, dst: &mut [i32]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of signed 32 bit integers from the underlying reader. Read more
fn read_i64_into<T>(&mut self, dst: &mut [i64]) -> Result<(), Error> where
T: ByteOrder,
fn read_i64_into<T>(&mut self, dst: &mut [i64]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of signed 64 bit integers from the underlying reader. Read more
fn read_i128_into<T>(&mut self, dst: &mut [i128]) -> Result<(), Error> where
T: ByteOrder,
fn read_i128_into<T>(&mut self, dst: &mut [i128]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of signed 128 bit integers from the underlying reader. Read more
fn read_f32_into<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder,
fn read_f32_into<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of IEEE754 single-precision (4 bytes) floating point numbers from the underlying reader. Read more
fn read_f32_into_unchecked<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder,
fn read_f32_into_unchecked<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder,
please use read_f32_into
instead
DEPRECATED. Read more
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
pub fn vzip(self) -> V
impl<T> DebugAny for T where
T: Any + Debug,
T: Any + Debug,
impl<T> UnsafeAny for T where
T: Any,
T: Any,