[−][src]Struct multipart::server::MultipartData
The data of a field in a multipart/form-data
request.
You can read it to EOF, or use the save()
adaptor to save it to disk/memory.
Methods
impl<M> MultipartData<M> where
M: ReadEntry,
[src]
impl<M> MultipartData<M> where
M: ReadEntry,
pub fn save(&mut self) -> SaveBuilder<&mut Self>
[src]
pub fn save(&mut self) -> SaveBuilder<&mut Self>
Get a builder type which can save the field with or without a size limit.
pub fn into_inner(self) -> M
[src]
pub fn into_inner(self) -> M
Take the inner Multipart
or &mut Multipart
pub fn set_min_buf_size(&mut self, min_buf_size: usize)
[src]
pub fn set_min_buf_size(&mut self, min_buf_size: usize)
Set the minimum buffer size that BufRead::fill_buf(self)
will return
until the end of the stream is reached. Set this as small as you can tolerate
to minimize read()
calls (read()
won't be called again until the buffer
is smaller than this).
This value is reset between fields.
Trait Implementations
impl<M: Debug> Debug for MultipartData<M>
[src]
impl<M: Debug> Debug for MultipartData<M>
impl<M: ReadEntry> Read for MultipartData<M>
[src]
impl<M: ReadEntry> Read for MultipartData<M>
fn read(&mut self, buf: &mut [u8]) -> Result<usize>
[src]
fn read(&mut self, buf: &mut [u8]) -> Result<usize>
unsafe fn initializer(&self) -> Initializer
[src]
unsafe fn initializer(&self) -> Initializer
read_initializer
)Determines if this Read
er can work with buffers of uninitialized memory. Read more
fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>
1.0.0[src]
fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>
Read all bytes until EOF in this source, placing them into buf
. Read more
fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>
1.0.0[src]
fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>
Read all bytes until EOF in this source, appending them to buf
. Read more
fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>
1.6.0[src]
fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>
Read the exact number of bytes required to fill buf
. Read more
fn by_ref(&mut self) -> &mut Self
1.0.0[src]
fn by_ref(&mut self) -> &mut Self
Creates a "by reference" adaptor for this instance of Read
. Read more
fn bytes(self) -> Bytes<Self>
1.0.0[src]
fn bytes(self) -> Bytes<Self>
Transforms this Read
instance to an [Iterator
] over its bytes. Read more
fn chain<R>(self, next: R) -> Chain<Self, R> where
R: Read,
1.0.0[src]
fn chain<R>(self, next: R) -> Chain<Self, R> where
R: Read,
Creates an adaptor which will chain this stream with another. Read more
fn take(self, limit: u64) -> Take<Self>
1.0.0[src]
fn take(self, limit: u64) -> Take<Self>
Creates an adaptor which will read at most limit
bytes from it. Read more
impl<M: ReadEntry> BufRead for MultipartData<M>
[src]
impl<M: ReadEntry> BufRead for MultipartData<M>
In this implementation, fill_buf()
can return more data with each call.
Use set_min_buf_size()
if you require a minimum buffer length.
fn fill_buf(&mut self) -> Result<&[u8]>
[src]
fn fill_buf(&mut self) -> Result<&[u8]>
fn consume(&mut self, amt: usize)
[src]
fn consume(&mut self, amt: usize)
fn read_until(&mut self, byte: u8, buf: &mut Vec<u8>) -> Result<usize, Error>
1.0.0[src]
fn read_until(&mut self, byte: u8, buf: &mut Vec<u8>) -> Result<usize, Error>
Read all bytes into buf
until the delimiter byte
or EOF is reached. Read more
fn read_line(&mut self, buf: &mut String) -> Result<usize, Error>
1.0.0[src]
fn read_line(&mut self, buf: &mut String) -> Result<usize, Error>
Read all bytes until a newline (the 0xA byte) is reached, and append them to the provided buffer. Read more
fn split(self, byte: u8) -> Split<Self>
1.0.0[src]
fn split(self, byte: u8) -> Split<Self>
Returns an iterator over the contents of this reader split on the byte byte
. Read more
fn lines(self) -> Lines<Self>
1.0.0[src]
fn lines(self) -> Lines<Self>
Returns an iterator over the lines of this reader. Read more
Auto Trait Implementations
impl<M> Send for MultipartData<M> where
M: Send,
impl<M> Send for MultipartData<M> where
M: Send,
impl<M> Sync for MultipartData<M> where
M: Sync,
impl<M> Sync for MultipartData<M> where
M: Sync,
Blanket Implementations
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
impl<T> Typeable for T where
T: Any,
impl<T> Typeable for T where
T: Any,
impl<R> ReadBytesExt for R where
R: Read + ?Sized,
impl<R> ReadBytesExt for R where
R: Read + ?Sized,
fn read_u8(&mut self) -> Result<u8, Error>
fn read_u8(&mut self) -> Result<u8, Error>
Reads an unsigned 8 bit integer from the underlying reader. Read more
fn read_i8(&mut self) -> Result<i8, Error>
fn read_i8(&mut self) -> Result<i8, Error>
Reads a signed 8 bit integer from the underlying reader. Read more
fn read_u16<T>(&mut self) -> Result<u16, Error> where
T: ByteOrder,
fn read_u16<T>(&mut self) -> Result<u16, Error> where
T: ByteOrder,
Reads an unsigned 16 bit integer from the underlying reader. Read more
fn read_i16<T>(&mut self) -> Result<i16, Error> where
T: ByteOrder,
fn read_i16<T>(&mut self) -> Result<i16, Error> where
T: ByteOrder,
Reads a signed 16 bit integer from the underlying reader. Read more
fn read_u24<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,
fn read_u24<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,
Reads an unsigned 24 bit integer from the underlying reader. Read more
fn read_i24<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,
fn read_i24<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,
Reads a signed 24 bit integer from the underlying reader. Read more
fn read_u32<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,
fn read_u32<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,
Reads an unsigned 32 bit integer from the underlying reader. Read more
fn read_i32<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,
fn read_i32<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,
Reads a signed 32 bit integer from the underlying reader. Read more
fn read_u48<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,
fn read_u48<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,
Reads an unsigned 48 bit integer from the underlying reader. Read more
fn read_i48<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,
fn read_i48<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,
Reads a signed 48 bit integer from the underlying reader. Read more
fn read_u64<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,
fn read_u64<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,
Reads an unsigned 64 bit integer from the underlying reader. Read more
fn read_i64<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,
fn read_i64<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,
Reads a signed 64 bit integer from the underlying reader. Read more
fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where
T: ByteOrder,
fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where
T: ByteOrder,
Reads an unsigned n-bytes integer from the underlying reader. Read more
fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where
T: ByteOrder,
fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where
T: ByteOrder,
Reads a signed n-bytes integer from the underlying reader. Read more
fn read_f32<T>(&mut self) -> Result<f32, Error> where
T: ByteOrder,
fn read_f32<T>(&mut self) -> Result<f32, Error> where
T: ByteOrder,
Reads a IEEE754 single-precision (4 bytes) floating point number from the underlying reader. Read more
fn read_f64<T>(&mut self) -> Result<f64, Error> where
T: ByteOrder,
fn read_f64<T>(&mut self) -> Result<f64, Error> where
T: ByteOrder,
Reads a IEEE754 double-precision (8 bytes) floating point number from the underlying reader. Read more
fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error> where
T: ByteOrder,
fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of unsigned 16 bit integers from the underlying reader. Read more
fn read_u32_into<T>(&mut self, dst: &mut [u32]) -> Result<(), Error> where
T: ByteOrder,
fn read_u32_into<T>(&mut self, dst: &mut [u32]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of unsigned 32 bit integers from the underlying reader. Read more
fn read_u64_into<T>(&mut self, dst: &mut [u64]) -> Result<(), Error> where
T: ByteOrder,
fn read_u64_into<T>(&mut self, dst: &mut [u64]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of unsigned 64 bit integers from the underlying reader. Read more
fn read_i16_into<T>(&mut self, dst: &mut [i16]) -> Result<(), Error> where
T: ByteOrder,
fn read_i16_into<T>(&mut self, dst: &mut [i16]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of signed 16 bit integers from the underlying reader. Read more
fn read_i32_into<T>(&mut self, dst: &mut [i32]) -> Result<(), Error> where
T: ByteOrder,
fn read_i32_into<T>(&mut self, dst: &mut [i32]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of signed 32 bit integers from the underlying reader. Read more
fn read_i64_into<T>(&mut self, dst: &mut [i64]) -> Result<(), Error> where
T: ByteOrder,
fn read_i64_into<T>(&mut self, dst: &mut [i64]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of signed 64 bit integers from the underlying reader. Read more
fn read_f32_into<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder,
fn read_f32_into<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of IEEE754 single-precision (4 bytes) floating point numbers from the underlying reader. Read more
fn read_f32_into_unchecked<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder,
fn read_f32_into_unchecked<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder,
: please use read_f32_into
instead
DEPRECATED. Read more
fn read_f64_into<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
T: ByteOrder,
fn read_f64_into<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of IEEE754 double-precision (8 bytes) floating point numbers from the underlying reader. Read more
fn read_f64_into_unchecked<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
T: ByteOrder,
fn read_f64_into_unchecked<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
T: ByteOrder,
: please use read_f64_into
instead
DEPRECATED. Read more
impl<T> DebugAny for T where
T: Any + Debug,
impl<T> DebugAny for T where
T: Any + Debug,
impl<T> UnsafeAny for T where
T: Any,
impl<T> UnsafeAny for T where
T: Any,