AVPRE_R | Field AVPRE reader - If set to 1, indicates that the pre-program verify operation has detected an error
|
AVPST_R | Field AVPST reader - If set to 1, indicates that the post-program verify operation has failed comparison
|
BMRK_R | Field BMRK reader - If set to 1, indicates that a Benchmark Compare match occurred
|
ERASE_R | Field ERASE reader - If set to 1, indicates that the Erase operation is complete
|
FLCTL_IFG_SPEC | Interrupt Flag Register
|
PRGB_R | Field PRGB reader - If set to 1, indicates that the configured Burst Program operation is complete
|
PRG_ERR_R | Field PRG_ERR reader - If set to 1, indicates a word composition error in full word write mode (possible data loss due to writes crossing over to a new 128bit boundary before full word has been composed)
|
PRG_R | Field PRG reader - If set to 1, indicates that a word Program operation is complete
|
R | Register FLCTL_IFG reader
|
RDBRST_R | Field RDBRST reader - If set to 1, indicates that the Read Burst/Compare operation is complete
|