Struct ms_oforms::common::VarFlags

pub struct VarFlags { /* fields omitted */ }

[MS-OAUT] VARFLAGS

The VARFLAGS enumeration values are used in the wVarFlags field of a VARDESC to specify the features of a field, constant, or ODL dispinterface property, as specified in section 2.2.43.

Methods

impl VarFlags

pub const READONLY: VarFlags

MUST be set if the variable is an ODL dispinterface property that was declared with the [readonly] attribute (see section 2.2.49.5.3).

pub const SOURCE: VarFlags

MUST be set if the variable is a property member of an ODL interface that was declared with the [source] attribute (see section 2.2.49.8).

pub const BINDABLE: VarFlags

MUST be set if the variable is an ODL dispinterface property that was declared with the [bindable] attribute (see section 2.2.49.5.2).

pub const REQUEST_EDIT: VarFlags

MUST be set if the variable is an ODL dispinterface property that was declared with the [requestedit] attribute (see section 2.2.49.5.2).

pub const DISPLAY_BIND: VarFlags

MUST be set if the variable is an ODL dispinterface property that was declared with the [displaybind] attribute (see section 2.2.49.5.2).

pub const DEFAULT_BIND: VarFlags

MUST be set if the variable is an ODL dispinterface property that was declared with the [defaultbind] attribute (see section 2.2.49.5.2).

pub const HIDDEN: VarFlags

MUST be set if the variable is a member of a type that was declared with the [hidden] attribute (see section 2.2.49.5.1).

pub const RESTRICTED: VarFlags

MUST be set if the variable is a member of a type that was declared with the [restricted] attribute (see section 2.2.49.5.1).

pub const DEFAULT_COLL_ELEM: VarFlags

MUST be set if the variable is an ODL dispinterface property that was declared with the [defaultcollelem] attribute (see section 2.2.49.5.1).

pub const UI_DEFAULT: VarFlags

MUST be set if the variable is an ODL dispinterface property that was declared with the [uidefault] attribute (see section 2.2.49.5.1).

pub const NON_BROWSABLE: VarFlags

MUST be set if the variable is an ODL dispinterface property that was declared with the [nonbrowsable] attribute (see section 2.2.49.5.1).

pub const REPLACEABLE: VarFlags

MUST be set if the variable is an ODL dispinterface property that was declared with the [replaceable] attribute (see section 2.2.49.5.1). MUST be ignored on receipt.

pub const IMMEDIATE_BIND: VarFlags

MUST be set if the variable is an ODL dispinterface property that was declared with the [immediatebind] attribute (see section 2.2.49.5.2).

pub fn empty() -> VarFlags

Returns an empty set of flags.

pub fn all() -> VarFlags

Returns the set containing all flags.

pub fn bits(&self) -> u16

Returns the raw value of the flags currently stored.

pub fn from_bits(bits: u16) -> Option<VarFlags>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub fn from_bits_truncate(bits: u16) -> VarFlags

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub fn intersects(&self, other: VarFlags) -> bool

Returns true if there are flags common to both self and other.

pub fn contains(&self, other: VarFlags) -> bool

Returns true all of the flags in other are contained within self.

pub fn insert(&mut self, other: VarFlags)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: VarFlags)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: VarFlags)

Toggles the specified flags in-place.

pub fn set(&mut self, other: VarFlags, value: bool)

Inserts or removes the specified flags depending on the passed value.

Trait Implementations

impl Copy for VarFlags

impl PartialOrd<VarFlags> for VarFlags

fn partial_cmp(&self, other: &VarFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &VarFlags) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &VarFlags) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &VarFlags) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &VarFlags) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialEq<VarFlags> for VarFlags

fn eq(&self, other: &VarFlags) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &VarFlags) -> bool

This method tests for !=.

impl Extend<VarFlags> for VarFlags

fn extend<T: IntoIterator<Item = VarFlags>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

impl Clone for VarFlags

fn clone(&self) -> VarFlags

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Ord for VarFlags

fn cmp(&self, other: &VarFlags) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

🔬 This is a nightly-only experimental API. (clamp)

Restrict a value to a certain interval.

impl Eq for VarFlags

impl Octal for VarFlags

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Binary for VarFlags

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Debug for VarFlags

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Sub<VarFlags> for VarFlags

type Output = VarFlags

The resulting type after applying the - operator.

fn sub(self, other: VarFlags) -> VarFlags

Returns the set difference of the two sets of flags.

impl SubAssign<VarFlags> for VarFlags

fn sub_assign(&mut self, other: VarFlags)

Disables all flags enabled in the set.

impl Not for VarFlags

type Output = VarFlags

The resulting type after applying the ! operator.

fn not(self) -> VarFlags

Returns the complement of this set of flags.

impl BitAnd<VarFlags> for VarFlags

type Output = VarFlags

The resulting type after applying the & operator.

fn bitand(self, other: VarFlags) -> VarFlags

Returns the intersection between the two sets of flags.

impl BitOr<VarFlags> for VarFlags

type Output = VarFlags

The resulting type after applying the | operator.

fn bitor(self, other: VarFlags) -> VarFlags

Returns the union of the two sets of flags.

impl BitXor<VarFlags> for VarFlags

type Output = VarFlags

The resulting type after applying the ^ operator.

fn bitxor(self, other: VarFlags) -> VarFlags

Returns the left flags, but with all the right flags toggled.

impl BitAndAssign<VarFlags> for VarFlags

fn bitand_assign(&mut self, other: VarFlags)

Disables all flags disabled in the set.

impl BitOrAssign<VarFlags> for VarFlags

fn bitor_assign(&mut self, other: VarFlags)

Adds the set of flags.

impl BitXorAssign<VarFlags> for VarFlags

fn bitxor_assign(&mut self, other: VarFlags)

Toggles the set of flags.

impl Hash for VarFlags

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl FromIterator<VarFlags> for VarFlags

fn from_iter<T: IntoIterator<Item = VarFlags>>(iterator: T) -> VarFlags

Creates a value from an iterator.

impl LowerHex for VarFlags

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl UpperHex for VarFlags

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.