//! Primitives for working with UDP.
//!
//! The types provided in this module are non-blocking by default and are
//! designed to be portable across all supported Mio platforms. As long as the
//! [portability guidelines] are followed, the behavior should be identical no
//! matter the target platform.
//!
//! [portability guidelines]: ../struct.Poll.html#portability
use crate::io_source::IoSource;
use crate::{event, sys, Interest, Registry, Token};
use std::fmt;
use std::io;
use std::net;
use std::net::{Ipv4Addr, Ipv6Addr, SocketAddr};
#[cfg(unix)]
use std::os::unix::io::{AsRawFd, FromRawFd, IntoRawFd, RawFd};
#[cfg(windows)]
use std::os::windows::io::{AsRawSocket, FromRawSocket, IntoRawSocket, RawSocket};
/// A User Datagram Protocol socket.
///
/// This is an implementation of a bound UDP socket. This supports both IPv4 and
/// IPv6 addresses, and there is no corresponding notion of a server because UDP
/// is a datagram protocol.
///
/// # Examples
///
#[cfg_attr(feature = "os-poll", doc = "```")]
#[cfg_attr(not(feature = "os-poll"), doc = "```ignore")]
/// # use std::error::Error;
/// #
/// # fn main() -> Result<(), Box<dyn Error>> {
/// // An Echo program:
/// // SENDER -> sends a message.
/// // ECHOER -> listens and prints the message received.
///
/// use mio::net::UdpSocket;
/// use mio::{Events, Interest, Poll, Token};
/// use std::time::Duration;
///
/// const SENDER: Token = Token(0);
/// const ECHOER: Token = Token(1);
///
/// // This operation will fail if the address is in use, so we select different ports for each
/// // socket.
/// let mut sender_socket = UdpSocket::bind("127.0.0.1:0".parse()?)?;
/// let mut echoer_socket = UdpSocket::bind("127.0.0.1:0".parse()?)?;
///
/// // If we do not use connect here, SENDER and ECHOER would need to call send_to and recv_from
/// // respectively.
/// sender_socket.connect(echoer_socket.local_addr()?)?;
///
/// // We need a Poll to check if SENDER is ready to be written into, and if ECHOER is ready to be
/// // read from.
/// let mut poll = Poll::new()?;
///
/// // We register our sockets here so that we can check if they are ready to be written/read.
/// poll.registry().register(&mut sender_socket, SENDER, Interest::WRITABLE)?;
/// poll.registry().register(&mut echoer_socket, ECHOER, Interest::READABLE)?;
///
/// let msg_to_send = [9; 9];
/// let mut buffer = [0; 9];
///
/// let mut events = Events::with_capacity(128);
/// loop {
/// poll.poll(&mut events, Some(Duration::from_millis(100)))?;
/// for event in events.iter() {
/// match event.token() {
/// // Our SENDER is ready to be written into.
/// SENDER => {
/// let bytes_sent = sender_socket.send(&msg_to_send)?;
/// assert_eq!(bytes_sent, 9);
/// println!("sent {:?} -> {:?} bytes", msg_to_send, bytes_sent);
/// },
/// // Our ECHOER is ready to be read from.
/// ECHOER => {
/// let num_recv = echoer_socket.recv(&mut buffer)?;
/// println!("echo {:?} -> {:?}", buffer, num_recv);
/// buffer = [0; 9];
/// # drop(buffer); // Silence unused assignment warning.
/// # return Ok(());
/// }
/// _ => unreachable!()
/// }
/// }
/// }
/// # }
/// ```
pub struct UdpSocket {
inner: IoSource<net::UdpSocket>,
}
impl UdpSocket {
/// Creates a UDP socket from the given address.
///
/// # Examples
///
#[cfg_attr(feature = "os-poll", doc = "```")]
#[cfg_attr(not(feature = "os-poll"), doc = "```ignore")]
/// # use std::error::Error;
/// #
/// # fn main() -> Result<(), Box<dyn Error>> {
/// use mio::net::UdpSocket;
///
/// // We must bind it to an open address.
/// let socket = match UdpSocket::bind("127.0.0.1:0".parse()?) {
/// Ok(new_socket) => new_socket,
/// Err(fail) => {
/// // We panic! here, but you could try to bind it again on another address.
/// panic!("Failed to bind socket. {:?}", fail);
/// }
/// };
///
/// // Our socket was created, but we should not use it before checking it's readiness.
/// # drop(socket); // Silence unused variable warning.
/// # Ok(())
/// # }
/// ```
pub fn bind(addr: SocketAddr) -> io::Result<UdpSocket> {
sys::udp::bind(addr).map(UdpSocket::from_std)
}
/// Creates a new `UdpSocket` from a standard `net::UdpSocket`.
///
/// This function is intended to be used to wrap a UDP socket from the
/// standard library in the Mio equivalent. The conversion assumes nothing
/// about the underlying socket; it is left up to the user to set it in
/// non-blocking mode.
pub fn from_std(socket: net::UdpSocket) -> UdpSocket {
UdpSocket {
inner: IoSource::new(socket),
}
}
/// Returns the socket address that this socket was created from.
///
/// # Examples
///
// This assertion is almost, but not quite, universal. It fails on
// shared-IP FreeBSD jails. It's hard for mio to know whether we're jailed,
// so simply disable the test on FreeBSD.
#[cfg_attr(all(feature = "os-poll", not(target_os = "freebsd")), doc = "```")]
#[cfg_attr(
any(not(feature = "os-poll"), target_os = "freebsd"),
doc = "```ignore"
)]
/// # use std::error::Error;
/// #
/// # fn main() -> Result<(), Box<dyn Error>> {
/// use mio::net::UdpSocket;
///
/// let addr = "127.0.0.1:0".parse()?;
/// let socket = UdpSocket::bind(addr)?;
/// assert_eq!(socket.local_addr()?.ip(), addr.ip());
/// # Ok(())
/// # }
/// ```
pub fn local_addr(&self) -> io::Result<SocketAddr> {
self.inner.local_addr()
}
/// Sends data on the socket to the given address. On success, returns the
/// number of bytes written.
///
/// Address type can be any implementor of `ToSocketAddrs` trait. See its
/// documentation for concrete examples.
///
/// # Examples
///
/// ```no_run
/// # use std::error::Error;
/// # fn main() -> Result<(), Box<dyn Error>> {
/// use mio::net::UdpSocket;
///
/// let socket = UdpSocket::bind("127.0.0.1:0".parse()?)?;
///
/// // We must check if the socket is writable before calling send_to,
/// // or we could run into a WouldBlock error.
///
/// let bytes_sent = socket.send_to(&[9; 9], "127.0.0.1:11100".parse()?)?;
/// assert_eq!(bytes_sent, 9);
/// #
/// # Ok(())
/// # }
/// ```
pub fn send_to(&self, buf: &[u8], target: SocketAddr) -> io::Result<usize> {
self.inner.do_io(|inner| inner.send_to(buf, target))
}
/// Receives data from the socket. On success, returns the number of bytes
/// read and the address from whence the data came.
///
/// # Notes
///
/// On Windows, if the data is larger than the buffer specified, the buffer
/// is filled with the first part of the data, and recv_from returns the error
/// WSAEMSGSIZE(10040). The excess data is lost.
/// Make sure to always use a sufficiently large buffer to hold the
/// maximum UDP packet size, which can be up to 65536 bytes in size.
///
/// # Examples
///
/// ```no_run
/// # use std::error::Error;
/// #
/// # fn main() -> Result<(), Box<dyn Error>> {
/// use mio::net::UdpSocket;
///
/// let socket = UdpSocket::bind("127.0.0.1:0".parse()?)?;
///
/// // We must check if the socket is readable before calling recv_from,
/// // or we could run into a WouldBlock error.
///
/// let mut buf = [0; 9];
/// let (num_recv, from_addr) = socket.recv_from(&mut buf)?;
/// println!("Received {:?} -> {:?} bytes from {:?}", buf, num_recv, from_addr);
/// #
/// # Ok(())
/// # }
/// ```
pub fn recv_from(&self, buf: &mut [u8]) -> io::Result<(usize, SocketAddr)> {
self.inner.do_io(|inner| inner.recv_from(buf))
}
/// Receives data from the socket, without removing it from the input queue.
/// On success, returns the number of bytes read and the address from whence
/// the data came.
///
/// # Notes
///
/// On Windows, if the data is larger than the buffer specified, the buffer
/// is filled with the first part of the data, and peek_from returns the error
/// WSAEMSGSIZE(10040). The excess data is lost.
/// Make sure to always use a sufficiently large buffer to hold the
/// maximum UDP packet size, which can be up to 65536 bytes in size.
///
/// # Examples
///
/// ```no_run
/// # use std::error::Error;
/// #
/// # fn main() -> Result<(), Box<dyn Error>> {
/// use mio::net::UdpSocket;
///
/// let socket = UdpSocket::bind("127.0.0.1:0".parse()?)?;
///
/// // We must check if the socket is readable before calling recv_from,
/// // or we could run into a WouldBlock error.
///
/// let mut buf = [0; 9];
/// let (num_recv, from_addr) = socket.peek_from(&mut buf)?;
/// println!("Received {:?} -> {:?} bytes from {:?}", buf, num_recv, from_addr);
/// #
/// # Ok(())
/// # }
/// ```
pub fn peek_from(&self, buf: &mut [u8]) -> io::Result<(usize, SocketAddr)> {
self.inner.do_io(|inner| inner.peek_from(buf))
}
/// Sends data on the socket to the address previously bound via connect(). On success,
/// returns the number of bytes written.
pub fn send(&self, buf: &[u8]) -> io::Result<usize> {
self.inner.do_io(|inner| inner.send(buf))
}
/// Receives data from the socket previously bound with connect(). On success, returns
/// the number of bytes read.
///
/// # Notes
///
/// On Windows, if the data is larger than the buffer specified, the buffer
/// is filled with the first part of the data, and recv returns the error
/// WSAEMSGSIZE(10040). The excess data is lost.
/// Make sure to always use a sufficiently large buffer to hold the
/// maximum UDP packet size, which can be up to 65536 bytes in size.
pub fn recv(&self, buf: &mut [u8]) -> io::Result<usize> {
self.inner.do_io(|inner| inner.recv(buf))
}
/// Receives data from the socket, without removing it from the input queue.
/// On success, returns the number of bytes read.
///
/// # Notes
///
/// On Windows, if the data is larger than the buffer specified, the buffer
/// is filled with the first part of the data, and peek returns the error
/// WSAEMSGSIZE(10040). The excess data is lost.
/// Make sure to always use a sufficiently large buffer to hold the
/// maximum UDP packet size, which can be up to 65536 bytes in size.
pub fn peek(&self, buf: &mut [u8]) -> io::Result<usize> {
self.inner.do_io(|inner| inner.peek(buf))
}
/// Connects the UDP socket setting the default destination for `send()`
/// and limiting packets that are read via `recv` from the address specified
/// in `addr`.
pub fn connect(&self, addr: SocketAddr) -> io::Result<()> {
self.inner.connect(addr)
}
/// Sets the value of the `SO_BROADCAST` option for this socket.
///
/// When enabled, this socket is allowed to send packets to a broadcast
/// address.
///
/// # Examples
///
#[cfg_attr(feature = "os-poll", doc = "```")]
#[cfg_attr(not(feature = "os-poll"), doc = "```ignore")]
/// # use std::error::Error;
/// #
/// # fn main() -> Result<(), Box<dyn Error>> {
/// use mio::net::UdpSocket;
///
/// let broadcast_socket = UdpSocket::bind("127.0.0.1:0".parse()?)?;
/// if broadcast_socket.broadcast()? == false {
/// broadcast_socket.set_broadcast(true)?;
/// }
///
/// assert_eq!(broadcast_socket.broadcast()?, true);
/// #
/// # Ok(())
/// # }
/// ```
pub fn set_broadcast(&self, on: bool) -> io::Result<()> {
self.inner.set_broadcast(on)
}
/// Gets the value of the `SO_BROADCAST` option for this socket.
///
/// For more information about this option, see
/// [`set_broadcast`][link].
///
/// [link]: #method.set_broadcast
///
/// # Examples
///
#[cfg_attr(feature = "os-poll", doc = "```")]
#[cfg_attr(not(feature = "os-poll"), doc = "```ignore")]
/// # use std::error::Error;
/// #
/// # fn main() -> Result<(), Box<dyn Error>> {
/// use mio::net::UdpSocket;
///
/// let broadcast_socket = UdpSocket::bind("127.0.0.1:0".parse()?)?;
/// assert_eq!(broadcast_socket.broadcast()?, false);
/// #
/// # Ok(())
/// # }
/// ```
pub fn broadcast(&self) -> io::Result<bool> {
self.inner.broadcast()
}
/// Sets the value of the `IP_MULTICAST_LOOP` option for this socket.
///
/// If enabled, multicast packets will be looped back to the local socket.
/// Note that this may not have any affect on IPv6 sockets.
pub fn set_multicast_loop_v4(&self, on: bool) -> io::Result<()> {
self.inner.set_multicast_loop_v4(on)
}
/// Gets the value of the `IP_MULTICAST_LOOP` option for this socket.
///
/// For more information about this option, see
/// [`set_multicast_loop_v4`][link].
///
/// [link]: #method.set_multicast_loop_v4
pub fn multicast_loop_v4(&self) -> io::Result<bool> {
self.inner.multicast_loop_v4()
}
/// Sets the value of the `IP_MULTICAST_TTL` option for this socket.
///
/// Indicates the time-to-live value of outgoing multicast packets for
/// this socket. The default value is 1 which means that multicast packets
/// don't leave the local network unless explicitly requested.
///
/// Note that this may not have any affect on IPv6 sockets.
pub fn set_multicast_ttl_v4(&self, ttl: u32) -> io::Result<()> {
self.inner.set_multicast_ttl_v4(ttl)
}
/// Gets the value of the `IP_MULTICAST_TTL` option for this socket.
///
/// For more information about this option, see
/// [`set_multicast_ttl_v4`][link].
///
/// [link]: #method.set_multicast_ttl_v4
pub fn multicast_ttl_v4(&self) -> io::Result<u32> {
self.inner.multicast_ttl_v4()
}
/// Sets the value of the `IPV6_MULTICAST_LOOP` option for this socket.
///
/// Controls whether this socket sees the multicast packets it sends itself.
/// Note that this may not have any affect on IPv4 sockets.
pub fn set_multicast_loop_v6(&self, on: bool) -> io::Result<()> {
self.inner.set_multicast_loop_v6(on)
}
/// Gets the value of the `IPV6_MULTICAST_LOOP` option for this socket.
///
/// For more information about this option, see
/// [`set_multicast_loop_v6`][link].
///
/// [link]: #method.set_multicast_loop_v6
pub fn multicast_loop_v6(&self) -> io::Result<bool> {
self.inner.multicast_loop_v6()
}
/// Sets the value for the `IP_TTL` option on this socket.
///
/// This value sets the time-to-live field that is used in every packet sent
/// from this socket.
///
/// # Examples
///
#[cfg_attr(feature = "os-poll", doc = "```")]
#[cfg_attr(not(feature = "os-poll"), doc = "```ignore")]
/// # use std::error::Error;
/// #
/// # fn main() -> Result<(), Box<dyn Error>> {
/// use mio::net::UdpSocket;
///
/// let socket = UdpSocket::bind("127.0.0.1:0".parse()?)?;
/// if socket.ttl()? < 255 {
/// socket.set_ttl(255)?;
/// }
///
/// assert_eq!(socket.ttl()?, 255);
/// #
/// # Ok(())
/// # }
/// ```
pub fn set_ttl(&self, ttl: u32) -> io::Result<()> {
self.inner.set_ttl(ttl)
}
/// Gets the value of the `IP_TTL` option for this socket.
///
/// For more information about this option, see [`set_ttl`][link].
///
/// [link]: #method.set_ttl
///
/// # Examples
///
#[cfg_attr(feature = "os-poll", doc = "```")]
#[cfg_attr(not(feature = "os-poll"), doc = "```ignore")]
/// # use std::error::Error;
/// #
/// # fn main() -> Result<(), Box<dyn Error>> {
/// use mio::net::UdpSocket;
///
/// let socket = UdpSocket::bind("127.0.0.1:0".parse()?)?;
/// socket.set_ttl(255)?;
///
/// assert_eq!(socket.ttl()?, 255);
/// #
/// # Ok(())
/// # }
/// ```
pub fn ttl(&self) -> io::Result<u32> {
self.inner.ttl()
}
/// Executes an operation of the `IP_ADD_MEMBERSHIP` type.
///
/// This function specifies a new multicast group for this socket to join.
/// The address must be a valid multicast address, and `interface` is the
/// address of the local interface with which the system should join the
/// multicast group. If it's equal to `INADDR_ANY` then an appropriate
/// interface is chosen by the system.
#[allow(clippy::trivially_copy_pass_by_ref)]
pub fn join_multicast_v4(&self, multiaddr: &Ipv4Addr, interface: &Ipv4Addr) -> io::Result<()> {
self.inner.join_multicast_v4(multiaddr, interface)
}
/// Executes an operation of the `IPV6_ADD_MEMBERSHIP` type.
///
/// This function specifies a new multicast group for this socket to join.
/// The address must be a valid multicast address, and `interface` is the
/// index of the interface to join/leave (or 0 to indicate any interface).
#[allow(clippy::trivially_copy_pass_by_ref)]
pub fn join_multicast_v6(&self, multiaddr: &Ipv6Addr, interface: u32) -> io::Result<()> {
self.inner.join_multicast_v6(multiaddr, interface)
}
/// Executes an operation of the `IP_DROP_MEMBERSHIP` type.
///
/// For more information about this option, see
/// [`join_multicast_v4`][link].
///
/// [link]: #method.join_multicast_v4
#[allow(clippy::trivially_copy_pass_by_ref)]
pub fn leave_multicast_v4(&self, multiaddr: &Ipv4Addr, interface: &Ipv4Addr) -> io::Result<()> {
self.inner.leave_multicast_v4(multiaddr, interface)
}
/// Executes an operation of the `IPV6_DROP_MEMBERSHIP` type.
///
/// For more information about this option, see
/// [`join_multicast_v6`][link].
///
/// [link]: #method.join_multicast_v6
#[allow(clippy::trivially_copy_pass_by_ref)]
pub fn leave_multicast_v6(&self, multiaddr: &Ipv6Addr, interface: u32) -> io::Result<()> {
self.inner.leave_multicast_v6(multiaddr, interface)
}
/// Get the value of the `IPV6_V6ONLY` option on this socket.
#[allow(clippy::trivially_copy_pass_by_ref)]
pub fn only_v6(&self) -> io::Result<bool> {
sys::udp::only_v6(&self.inner)
}
/// Get the value of the `SO_ERROR` option on this socket.
///
/// This will retrieve the stored error in the underlying socket, clearing
/// the field in the process. This can be useful for checking errors between
/// calls.
pub fn take_error(&self) -> io::Result<Option<io::Error>> {
self.inner.take_error()
}
}
impl event::Source for UdpSocket {
fn register(
&mut self,
registry: &Registry,
token: Token,
interests: Interest,
) -> io::Result<()> {
self.inner.register(registry, token, interests)
}
fn reregister(
&mut self,
registry: &Registry,
token: Token,
interests: Interest,
) -> io::Result<()> {
self.inner.reregister(registry, token, interests)
}
fn deregister(&mut self, registry: &Registry) -> io::Result<()> {
self.inner.deregister(registry)
}
}
impl fmt::Debug for UdpSocket {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
self.inner.fmt(f)
}
}
#[cfg(unix)]
impl IntoRawFd for UdpSocket {
fn into_raw_fd(self) -> RawFd {
self.inner.into_inner().into_raw_fd()
}
}
#[cfg(unix)]
impl AsRawFd for UdpSocket {
fn as_raw_fd(&self) -> RawFd {
self.inner.as_raw_fd()
}
}
#[cfg(unix)]
impl FromRawFd for UdpSocket {
/// Converts a `RawFd` to a `UdpSocket`.
///
/// # Notes
///
/// The caller is responsible for ensuring that the socket is in
/// non-blocking mode.
unsafe fn from_raw_fd(fd: RawFd) -> UdpSocket {
UdpSocket::from_std(FromRawFd::from_raw_fd(fd))
}
}
#[cfg(windows)]
impl IntoRawSocket for UdpSocket {
fn into_raw_socket(self) -> RawSocket {
self.inner.into_inner().into_raw_socket()
}
}
#[cfg(windows)]
impl AsRawSocket for UdpSocket {
fn as_raw_socket(&self) -> RawSocket {
self.inner.as_raw_socket()
}
}
#[cfg(windows)]
impl FromRawSocket for UdpSocket {
/// Converts a `RawSocket` to a `UdpSocket`.
///
/// # Notes
///
/// The caller is responsible for ensuring that the socket is in
/// non-blocking mode.
unsafe fn from_raw_socket(socket: RawSocket) -> UdpSocket {
UdpSocket::from_std(FromRawSocket::from_raw_socket(socket))
}
}