Struct mcp2210::GpioValue [−]
pub struct GpioValue { /* fields omitted */ }
Methods
impl GpioValue
impl GpioValue
pub const GP0: GpioValue
GP0: GpioValue = GpioValue{bits: 1,}
pub const GP1: GpioValue
GP1: GpioValue = GpioValue{bits: 2,}
pub const GP2: GpioValue
GP2: GpioValue = GpioValue{bits: 4,}
pub const GP3: GpioValue
GP3: GpioValue = GpioValue{bits: 8,}
pub const GP4: GpioValue
GP4: GpioValue = GpioValue{bits: 16,}
pub const GP5: GpioValue
GP5: GpioValue = GpioValue{bits: 32,}
pub const GP6: GpioValue
GP6: GpioValue = GpioValue{bits: 64,}
pub const GP7: GpioValue
GP7: GpioValue = GpioValue{bits: 128,}
pub const GP8: GpioValue
GP8: GpioValue = GpioValue{bits: 256,}
pub const ALL_HIGH: GpioValue
ALL_HIGH: GpioValue = GpioValue{bits: 511,}
pub const ALL_LOW: GpioValue
ALL_LOW: GpioValue = GpioValue{bits: 0,}
pub fn empty() -> GpioValue
pub fn empty() -> GpioValue
Returns an empty set of flags.
pub fn all() -> GpioValue
pub fn all() -> GpioValue
Returns the set containing all flags.
pub fn bits(&self) -> u16
pub fn bits(&self) -> u16
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: u16) -> Option<GpioValue>
pub fn from_bits(bits: u16) -> Option<GpioValue>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub fn from_bits_truncate(bits: u16) -> GpioValue
pub fn from_bits_truncate(bits: u16) -> GpioValue
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub fn is_empty(&self) -> bool
pub fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub fn is_all(&self) -> bool
pub fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub fn intersects(&self, other: GpioValue) -> bool
pub fn intersects(&self, other: GpioValue) -> bool
Returns true
if there are flags common to both self
and other
.
pub fn contains(&self, other: GpioValue) -> bool
pub fn contains(&self, other: GpioValue) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: GpioValue)
pub fn insert(&mut self, other: GpioValue)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: GpioValue)
pub fn remove(&mut self, other: GpioValue)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: GpioValue)
pub fn toggle(&mut self, other: GpioValue)
Toggles the specified flags in-place.
pub fn set(&mut self, other: GpioValue, value: bool)
pub fn set(&mut self, other: GpioValue, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Copy for GpioValue
impl Copy for GpioValue
impl PartialEq for GpioValue
impl PartialEq for GpioValue
fn eq(&self, other: &GpioValue) -> bool
fn eq(&self, other: &GpioValue) -> bool
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &GpioValue) -> bool
fn ne(&self, other: &GpioValue) -> bool
This method tests for !=
.
impl Eq for GpioValue
impl Eq for GpioValue
impl Clone for GpioValue
impl Clone for GpioValue
fn clone(&self) -> GpioValue
fn clone(&self) -> GpioValue
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)
1.0.0[src]
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
impl PartialOrd for GpioValue
impl PartialOrd for GpioValue
fn partial_cmp(&self, other: &GpioValue) -> Option<Ordering>
fn partial_cmp(&self, other: &GpioValue) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
fn lt(&self, other: &GpioValue) -> bool
fn lt(&self, other: &GpioValue) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
fn le(&self, other: &GpioValue) -> bool
fn le(&self, other: &GpioValue) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
fn gt(&self, other: &GpioValue) -> bool
fn gt(&self, other: &GpioValue) -> bool
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
fn ge(&self, other: &GpioValue) -> bool
fn ge(&self, other: &GpioValue) -> bool
This method tests greater than or equal to (for self
and other
) and is used by the >=
operator. Read more
impl Ord for GpioValue
impl Ord for GpioValue
fn cmp(&self, other: &GpioValue) -> Ordering
fn cmp(&self, other: &GpioValue) -> Ordering
This method returns an Ordering
between self
and other
. Read more
fn max(self, other: Self) -> Self
1.21.0[src]
fn max(self, other: Self) -> Self
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self
1.21.0[src]
fn min(self, other: Self) -> Self
Compares and returns the minimum of two values. Read more
impl Hash for GpioValue
impl Hash for GpioValue
fn hash<__H: Hasher>(&self, state: &mut __H)
fn hash<__H: Hasher>(&self, state: &mut __H)
Feeds this value into the given [Hasher
]. Read more
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl Debug for GpioValue
impl Debug for GpioValue
impl Binary for GpioValue
impl Binary for GpioValue
impl Octal for GpioValue
impl Octal for GpioValue
impl LowerHex for GpioValue
impl LowerHex for GpioValue
impl UpperHex for GpioValue
impl UpperHex for GpioValue
impl BitOr for GpioValue
impl BitOr for GpioValue
type Output = GpioValue
The resulting type after applying the |
operator.
fn bitor(self, other: GpioValue) -> GpioValue
fn bitor(self, other: GpioValue) -> GpioValue
Returns the union of the two sets of flags.
impl BitOrAssign for GpioValue
impl BitOrAssign for GpioValue
fn bitor_assign(&mut self, other: GpioValue)
fn bitor_assign(&mut self, other: GpioValue)
Adds the set of flags.
impl BitXor for GpioValue
impl BitXor for GpioValue
type Output = GpioValue
The resulting type after applying the ^
operator.
fn bitxor(self, other: GpioValue) -> GpioValue
fn bitxor(self, other: GpioValue) -> GpioValue
Returns the left flags, but with all the right flags toggled.
impl BitXorAssign for GpioValue
impl BitXorAssign for GpioValue
fn bitxor_assign(&mut self, other: GpioValue)
fn bitxor_assign(&mut self, other: GpioValue)
Toggles the set of flags.
impl BitAnd for GpioValue
impl BitAnd for GpioValue
type Output = GpioValue
The resulting type after applying the &
operator.
fn bitand(self, other: GpioValue) -> GpioValue
fn bitand(self, other: GpioValue) -> GpioValue
Returns the intersection between the two sets of flags.
impl BitAndAssign for GpioValue
impl BitAndAssign for GpioValue
fn bitand_assign(&mut self, other: GpioValue)
fn bitand_assign(&mut self, other: GpioValue)
Disables all flags disabled in the set.
impl Sub for GpioValue
impl Sub for GpioValue
type Output = GpioValue
The resulting type after applying the -
operator.
fn sub(self, other: GpioValue) -> GpioValue
fn sub(self, other: GpioValue) -> GpioValue
Returns the set difference of the two sets of flags.
impl SubAssign for GpioValue
impl SubAssign for GpioValue
fn sub_assign(&mut self, other: GpioValue)
fn sub_assign(&mut self, other: GpioValue)
Disables all flags enabled in the set.
impl Not for GpioValue
impl Not for GpioValue
type Output = GpioValue
The resulting type after applying the !
operator.
fn not(self) -> GpioValue
fn not(self) -> GpioValue
Returns the complement of this set of flags.
impl Extend<GpioValue> for GpioValue
impl Extend<GpioValue> for GpioValue
fn extend<T: IntoIterator<Item = GpioValue>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = GpioValue>>(&mut self, iterator: T)
Extends a collection with the contents of an iterator. Read more
impl FromIterator<GpioValue> for GpioValue
impl FromIterator<GpioValue> for GpioValue
fn from_iter<T: IntoIterator<Item = GpioValue>>(iterator: T) -> GpioValue
fn from_iter<T: IntoIterator<Item = GpioValue>>(iterator: T) -> GpioValue
Creates a value from an iterator. Read more
impl Default for GpioValue
[src]
impl Default for GpioValue