Type Definition lpc54606_pac::i2c0::timeout::R

type R = R<u32, TIMEOUT>;

Reader of register TIMEOUT

Methods

impl R

pub fn tomin(&self) -> TOMIN_R

Bits 0:3 - Time-out time value, bottom four bits. These are hard-wired to 0xF. This gives a minimum time-out of 16 I2C function clocks and also a time-out resolution of 16 I2C function clocks.

pub fn to(&self) -> TO_R

Bits 4:15 - Time-out time value. Specifies the time-out interval value in increments of 16 I 2C function clocks, as defined by the CLKDIV register. To change this value while I2C is in operation, disable all time-outs, write a new value to TIMEOUT, then re-enable time-outs. 0x000 = A time-out will occur after 16 counts of the I2C function clock. 0x001 = A time-out will occur after 32 counts of the I2C function clock. 0xFFF = A time-out will occur after 65,536 counts of the I2C function clock.