[−][src]Struct lpc176x_5x::gpio::set::W

pub struct W { /* fields omitted */ }

Value to write to the register

Methods

`impl W`[src]

`pub fn reset_value() -> W`[src]

Reset value of the register

`pub unsafe fn bits(&mut self, bits: u32) -> &mut Self`[src]

Writes raw bits to the register

`pub fn pinset0(&mut self) -> _PINSET0W`[src]

Bit 0 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset1(&mut self) -> _PINSET1W`[src]

Bit 1 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset2(&mut self) -> _PINSET2W`[src]

Bit 2 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset3(&mut self) -> _PINSET3W`[src]

Bit 3 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset4(&mut self) -> _PINSET4W`[src]

Bit 4 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset5(&mut self) -> _PINSET5W`[src]

Bit 5 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset6(&mut self) -> _PINSET6W`[src]

Bit 6 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset7(&mut self) -> _PINSET7W`[src]

Bit 7 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset8(&mut self) -> _PINSET8W`[src]

Bit 8 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset9(&mut self) -> _PINSET9W`[src]

Bit 9 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset10(&mut self) -> _PINSET10W`[src]

Bit 10 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset11(&mut self) -> _PINSET11W`[src]

Bit 11 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset12(&mut self) -> _PINSET12W`[src]

Bit 12 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset13(&mut self) -> _PINSET13W`[src]

Bit 13 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset14(&mut self) -> _PINSET14W`[src]

Bit 14 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset15(&mut self) -> _PINSET15W`[src]

Bit 15 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset16(&mut self) -> _PINSET16W`[src]

Bit 16 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset17(&mut self) -> _PINSET17W`[src]

Bit 17 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset18(&mut self) -> _PINSET18W`[src]

Bit 18 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset19(&mut self) -> _PINSET19W`[src]

Bit 19 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset20(&mut self) -> _PINSET20W`[src]

Bit 20 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset21(&mut self) -> _PINSET21W`[src]

Bit 21 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset22(&mut self) -> _PINSET22W`[src]

Bit 22 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset23(&mut self) -> _PINSET23W`[src]

Bit 23 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset24(&mut self) -> _PINSET24W`[src]

Bit 24 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset25(&mut self) -> _PINSET25W`[src]

Bit 25 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset26(&mut self) -> _PINSET26W`[src]

Bit 26 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset27(&mut self) -> _PINSET27W`[src]

Bit 27 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset28(&mut self) -> _PINSET28W`[src]

Bit 28 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset29(&mut self) -> _PINSET29W`[src]

Bit 29 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset30(&mut self) -> _PINSET30W`[src]

Bit 30 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

`pub fn pinset31(&mut self) -> _PINSET31W`[src]

Bit 31 - Fast GPIO output value Set bits. Bit 0 in SETx controls pin Px[0], bit 31 in SETx controls pin Px[31]. 0 = Controlled pin output is unchanged. 1 = Controlled pin output is set to HIGH.

Auto Trait Implementations

`impl Send for W`

`impl Sync for W`

Blanket Implementations

`impl<T> From for T`[src]

`fn from(t: T) -> T`[src]

`impl<T, U> TryFrom for T where U: Into<T>,` [src]

`type Error = !`

🔬 This is a nightly-only experimental API. (try_from)

The type returned in the event of a conversion error.

`fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>`[src]

`impl<T, U> TryInto for T where U: TryFrom<T>,` [src]

`type Error = <U as TryFrom<T>>::Error`

🔬 This is a nightly-only experimental API. (try_from)

The type returned in the event of a conversion error.

[−][src]Struct lpc176x_5x::gpio::set::W

Methods

impl W[src]

pub fn reset_value() -> W[src]

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self[src]

pub fn pinset0(&mut self) -> _PINSET0W[src]

pub fn pinset1(&mut self) -> _PINSET1W[src]

pub fn pinset2(&mut self) -> _PINSET2W[src]

pub fn pinset3(&mut self) -> _PINSET3W[src]

pub fn pinset4(&mut self) -> _PINSET4W[src]

pub fn pinset5(&mut self) -> _PINSET5W[src]

pub fn pinset6(&mut self) -> _PINSET6W[src]

pub fn pinset7(&mut self) -> _PINSET7W[src]

pub fn pinset8(&mut self) -> _PINSET8W[src]

pub fn pinset9(&mut self) -> _PINSET9W[src]

pub fn pinset10(&mut self) -> _PINSET10W[src]

pub fn pinset11(&mut self) -> _PINSET11W[src]

pub fn pinset12(&mut self) -> _PINSET12W[src]

pub fn pinset13(&mut self) -> _PINSET13W[src]

pub fn pinset14(&mut self) -> _PINSET14W[src]

pub fn pinset15(&mut self) -> _PINSET15W[src]

pub fn pinset16(&mut self) -> _PINSET16W[src]

pub fn pinset17(&mut self) -> _PINSET17W[src]

pub fn pinset18(&mut self) -> _PINSET18W[src]

pub fn pinset19(&mut self) -> _PINSET19W[src]

pub fn pinset20(&mut self) -> _PINSET20W[src]

pub fn pinset21(&mut self) -> _PINSET21W[src]

pub fn pinset22(&mut self) -> _PINSET22W[src]

pub fn pinset23(&mut self) -> _PINSET23W[src]

pub fn pinset24(&mut self) -> _PINSET24W[src]

pub fn pinset25(&mut self) -> _PINSET25W[src]

pub fn pinset26(&mut self) -> _PINSET26W[src]

pub fn pinset27(&mut self) -> _PINSET27W[src]

pub fn pinset28(&mut self) -> _PINSET28W[src]

pub fn pinset29(&mut self) -> _PINSET29W[src]

pub fn pinset30(&mut self) -> _PINSET30W[src]

pub fn pinset31(&mut self) -> _PINSET31W[src]

Auto Trait Implementations

impl Send for W

impl Sync for W

Blanket Implementations

impl<T> From for T[src]

fn from(t: T) -> T[src]

impl<T, U> TryFrom for T where U: Into<T>, [src]

type Error = !

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]

impl<T, U> TryInto for T where U: TryFrom<T>, [src]

type Error = <U as TryFrom<T>>::Error

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]

impl<T, U> Into for T where U: From<T>, [src]

fn into(self) -> U[src]

impl<T> Borrow for T where T: ?Sized, [src]

fn borrow(&self) -> &T[src]

impl<T> BorrowMut for T where T: ?Sized, [src]

fn borrow_mut(&mut self) -> &mut T[src]

impl<T> Any for T where T: 'static + ?Sized, [src]

fn type_id(&self) -> TypeId[src]