pub struct Misc { /* private fields */ }
Expand description
MISC register fields
Implementations§
source§impl Misc
impl Misc
sourcepub const VARIABLE_D_SEL: Self = _
pub const VARIABLE_D_SEL: Self = _
Variable D source selection
sourcepub const EN_AUTO_INCR: Self = _
pub const EN_AUTO_INCR: Self = _
The automatic increment feature of the serial bus address enables a quick memory write of successive registers within one transmission.
sourcepub const POWERSAVE_EN: Self = _
pub const POWERSAVE_EN: Self = _
Power save mode
sourcepub const CP_MODE_1x: Self = _
pub const CP_MODE_1x: Self = _
Charge pump operation mode forced to bypass mode (1x).
sourcepub const CP_MODE_1_5x: Self = _
pub const CP_MODE_1_5x: Self = _
Charge pump operation mode forced to 1.5× mode; output voltage is boosted to 4.5 V
sourcepub const CP_MODE_AUTO: Self = _
pub const CP_MODE_AUTO: Self = _
Automatic mode selection
sourcepub const PWM_PS_EN: Self = _
pub const PWM_PS_EN: Self = _
Enables PWM powersave operation. Significant power savings can be achieved, for example, during ramp instruction.
sourcepub const CLK_DET_EN: Self = _
pub const CLK_DET_EN: Self = _
CLK_DET_EN
sourcepub const INT_CLK_EN: Self = _
pub const INT_CLK_EN: Self = _
INT_CLK_EN
sourcepub const fn from_bits(bits: u8) -> Option<Self>
pub const fn from_bits(bits: u8) -> Option<Self>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
sourcepub const fn from_bits_truncate(bits: u8) -> Self
pub const fn from_bits_truncate(bits: u8) -> Self
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
sourcepub const unsafe fn from_bits_unchecked(bits: u8) -> Self
pub const unsafe fn from_bits_unchecked(bits: u8) -> Self
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
Safety
The caller of the bitflags!
macro can chose to allow or
disallow extra bits for their bitflags type.
The caller of from_bits_unchecked()
has to ensure that
all bits correspond to a defined flag or that extra bits
are valid for this bitflags type.
sourcepub const fn intersects(&self, other: Self) -> bool
pub const fn intersects(&self, other: Self) -> bool
Returns true
if there are flags common to both self
and other
.
sourcepub const fn contains(&self, other: Self) -> bool
pub const fn contains(&self, other: Self) -> bool
Returns true
if all of the flags in other
are contained within self
.
sourcepub fn set(&mut self, other: Self, value: bool)
pub fn set(&mut self, other: Self, value: bool)
Inserts or removes the specified flags depending on the passed value.
sourcepub const fn intersection(self, other: Self) -> Self
pub const fn intersection(self, other: Self) -> Self
Returns the intersection between the flags in self
and
other
.
Specifically, the returned set contains only the flags which are
present in both self
and other
.
This is equivalent to using the &
operator (e.g.
ops::BitAnd
), as in flags & other
.
sourcepub const fn union(self, other: Self) -> Self
pub const fn union(self, other: Self) -> Self
Returns the union of between the flags in self
and other
.
Specifically, the returned set contains all flags which are
present in either self
or other
, including any which are
present in both (see Self::symmetric_difference
if that
is undesirable).
This is equivalent to using the |
operator (e.g.
ops::BitOr
), as in flags | other
.
sourcepub const fn difference(self, other: Self) -> Self
pub const fn difference(self, other: Self) -> Self
Returns the difference between the flags in self
and other
.
Specifically, the returned set contains all flags present in
self
, except for the ones present in other
.
It is also conceptually equivalent to the “bit-clear” operation:
flags & !other
(and this syntax is also supported).
This is equivalent to using the -
operator (e.g.
ops::Sub
), as in flags - other
.
sourcepub const fn symmetric_difference(self, other: Self) -> Self
pub const fn symmetric_difference(self, other: Self) -> Self
Returns the symmetric difference between the flags
in self
and other
.
Specifically, the returned set contains the flags present which
are present in self
or other
, but that are not present in
both. Equivalently, it contains the flags present in exactly
one of the sets self
and other
.
This is equivalent to using the ^
operator (e.g.
ops::BitXor
), as in flags ^ other
.
sourcepub const fn complement(self) -> Self
pub const fn complement(self) -> Self
Returns the complement of this set of flags.
Specifically, the returned set contains all the flags which are
not set in self
, but which are allowed for this type.
Alternatively, it can be thought of as the set difference
between Self::all()
and self
(e.g. Self::all() - self
)
This is equivalent to using the !
operator (e.g.
ops::Not
), as in !flags
.
Trait Implementations§
source§impl BitAndAssign<Misc> for Misc
impl BitAndAssign<Misc> for Misc
source§fn bitand_assign(&mut self, other: Self)
fn bitand_assign(&mut self, other: Self)
Disables all flags disabled in the set.
source§impl BitOrAssign<Misc> for Misc
impl BitOrAssign<Misc> for Misc
source§fn bitor_assign(&mut self, other: Self)
fn bitor_assign(&mut self, other: Self)
Adds the set of flags.
source§impl BitXorAssign<Misc> for Misc
impl BitXorAssign<Misc> for Misc
source§fn bitxor_assign(&mut self, other: Self)
fn bitxor_assign(&mut self, other: Self)
Toggles the set of flags.
source§impl Extend<Misc> for Misc
impl Extend<Misc> for Misc
source§fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
source§fn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)source§fn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)source§impl FromIterator<Misc> for Misc
impl FromIterator<Misc> for Misc
source§fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
source§impl Ord for Misc
impl Ord for Misc
source§impl PartialOrd<Misc> for Misc
impl PartialOrd<Misc> for Misc
1.0.0 · source§fn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
self
and other
) and is used by the <=
operator. Read moresource§impl SubAssign<Misc> for Misc
impl SubAssign<Misc> for Misc
source§fn sub_assign(&mut self, other: Self)
fn sub_assign(&mut self, other: Self)
Disables all flags enabled in the set.