#![deny(warnings)]
#![allow(non_camel_case_types)]
#![allow(clippy::all)]
#![no_std]
mod generic;
pub use generic::*;
#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
#[doc = "0x00 - USB PHY Power-Down Register"]
pub pwd: PWD,
#[doc = "0x04 - USB PHY Power-Down Register"]
pub pwd_set: PWD_SET,
#[doc = "0x08 - USB PHY Power-Down Register"]
pub pwd_clr: PWD_CLR,
#[doc = "0x0c - USB PHY Power-Down Register"]
pub pwd_tog: PWD_TOG,
#[doc = "0x10 - USB PHY Transmitter Control Register"]
pub tx: TX,
#[doc = "0x14 - USB PHY Transmitter Control Register"]
pub tx_set: TX_SET,
#[doc = "0x18 - USB PHY Transmitter Control Register"]
pub tx_clr: TX_CLR,
#[doc = "0x1c - USB PHY Transmitter Control Register"]
pub tx_tog: TX_TOG,
#[doc = "0x20 - USB PHY Receiver Control Register"]
pub rx: RX,
#[doc = "0x24 - USB PHY Receiver Control Register"]
pub rx_set: RX_SET,
#[doc = "0x28 - USB PHY Receiver Control Register"]
pub rx_clr: RX_CLR,
#[doc = "0x2c - USB PHY Receiver Control Register"]
pub rx_tog: RX_TOG,
#[doc = "0x30 - USB PHY General Control Register"]
pub ctrl: CTRL,
#[doc = "0x34 - USB PHY General Control Register"]
pub ctrl_set: CTRL_SET,
#[doc = "0x38 - USB PHY General Control Register"]
pub ctrl_clr: CTRL_CLR,
#[doc = "0x3c - USB PHY General Control Register"]
pub ctrl_tog: CTRL_TOG,
#[doc = "0x40 - USB PHY Status Register"]
pub status: STATUS,
_reserved17: [u8; 12usize],
#[doc = "0x50 - USB PHY Debug Register"]
pub debug: DEBUG,
#[doc = "0x54 - USB PHY Debug Register"]
pub debug_set: DEBUG_SET,
#[doc = "0x58 - USB PHY Debug Register"]
pub debug_clr: DEBUG_CLR,
#[doc = "0x5c - USB PHY Debug Register"]
pub debug_tog: DEBUG_TOG,
#[doc = "0x60 - UTMI Debug Status Register 0"]
pub debug0_status: DEBUG0_STATUS,
_reserved22: [u8; 12usize],
#[doc = "0x70 - UTMI Debug Status Register 1"]
pub debug1: DEBUG1,
#[doc = "0x74 - UTMI Debug Status Register 1"]
pub debug1_set: DEBUG1_SET,
#[doc = "0x78 - UTMI Debug Status Register 1"]
pub debug1_clr: DEBUG1_CLR,
#[doc = "0x7c - UTMI Debug Status Register 1"]
pub debug1_tog: DEBUG1_TOG,
#[doc = "0x80 - UTMI RTL Version"]
pub version: VERSION,
}
#[doc = "USB PHY Power-Down Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [pwd](pwd) module"]
pub type PWD = crate::Reg<u32, _PWD>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _PWD;
#[doc = "`read()` method returns [pwd::R](pwd::R) reader structure"]
impl crate::Readable for PWD {}
#[doc = "`write(|w| ..)` method takes [pwd::W](pwd::W) writer structure"]
impl crate::Writable for PWD {}
#[doc = "USB PHY Power-Down Register"]
pub mod pwd;
#[doc = "USB PHY Power-Down Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [pwd_set](pwd_set) module"]
pub type PWD_SET = crate::Reg<u32, _PWD_SET>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _PWD_SET;
#[doc = "`read()` method returns [pwd_set::R](pwd_set::R) reader structure"]
impl crate::Readable for PWD_SET {}
#[doc = "`write(|w| ..)` method takes [pwd_set::W](pwd_set::W) writer structure"]
impl crate::Writable for PWD_SET {}
#[doc = "USB PHY Power-Down Register"]
pub mod pwd_set;
#[doc = "USB PHY Power-Down Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [pwd_clr](pwd_clr) module"]
pub type PWD_CLR = crate::Reg<u32, _PWD_CLR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _PWD_CLR;
#[doc = "`read()` method returns [pwd_clr::R](pwd_clr::R) reader structure"]
impl crate::Readable for PWD_CLR {}
#[doc = "`write(|w| ..)` method takes [pwd_clr::W](pwd_clr::W) writer structure"]
impl crate::Writable for PWD_CLR {}
#[doc = "USB PHY Power-Down Register"]
pub mod pwd_clr;
#[doc = "USB PHY Power-Down Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [pwd_tog](pwd_tog) module"]
pub type PWD_TOG = crate::Reg<u32, _PWD_TOG>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _PWD_TOG;
#[doc = "`read()` method returns [pwd_tog::R](pwd_tog::R) reader structure"]
impl crate::Readable for PWD_TOG {}
#[doc = "`write(|w| ..)` method takes [pwd_tog::W](pwd_tog::W) writer structure"]
impl crate::Writable for PWD_TOG {}
#[doc = "USB PHY Power-Down Register"]
pub mod pwd_tog;
#[doc = "USB PHY Transmitter Control Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [tx](tx) module"]
pub type TX = crate::Reg<u32, _TX>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _TX;
#[doc = "`read()` method returns [tx::R](tx::R) reader structure"]
impl crate::Readable for TX {}
#[doc = "`write(|w| ..)` method takes [tx::W](tx::W) writer structure"]
impl crate::Writable for TX {}
#[doc = "USB PHY Transmitter Control Register"]
pub mod tx;
#[doc = "USB PHY Transmitter Control Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [tx_set](tx_set) module"]
pub type TX_SET = crate::Reg<u32, _TX_SET>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _TX_SET;
#[doc = "`read()` method returns [tx_set::R](tx_set::R) reader structure"]
impl crate::Readable for TX_SET {}
#[doc = "`write(|w| ..)` method takes [tx_set::W](tx_set::W) writer structure"]
impl crate::Writable for TX_SET {}
#[doc = "USB PHY Transmitter Control Register"]
pub mod tx_set;
#[doc = "USB PHY Transmitter Control Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [tx_clr](tx_clr) module"]
pub type TX_CLR = crate::Reg<u32, _TX_CLR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _TX_CLR;
#[doc = "`read()` method returns [tx_clr::R](tx_clr::R) reader structure"]
impl crate::Readable for TX_CLR {}
#[doc = "`write(|w| ..)` method takes [tx_clr::W](tx_clr::W) writer structure"]
impl crate::Writable for TX_CLR {}
#[doc = "USB PHY Transmitter Control Register"]
pub mod tx_clr;
#[doc = "USB PHY Transmitter Control Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [tx_tog](tx_tog) module"]
pub type TX_TOG = crate::Reg<u32, _TX_TOG>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _TX_TOG;
#[doc = "`read()` method returns [tx_tog::R](tx_tog::R) reader structure"]
impl crate::Readable for TX_TOG {}
#[doc = "`write(|w| ..)` method takes [tx_tog::W](tx_tog::W) writer structure"]
impl crate::Writable for TX_TOG {}
#[doc = "USB PHY Transmitter Control Register"]
pub mod tx_tog;
#[doc = "USB PHY Receiver Control Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [rx](rx) module"]
pub type RX = crate::Reg<u32, _RX>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _RX;
#[doc = "`read()` method returns [rx::R](rx::R) reader structure"]
impl crate::Readable for RX {}
#[doc = "`write(|w| ..)` method takes [rx::W](rx::W) writer structure"]
impl crate::Writable for RX {}
#[doc = "USB PHY Receiver Control Register"]
pub mod rx;
#[doc = "USB PHY Receiver Control Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [rx_set](rx_set) module"]
pub type RX_SET = crate::Reg<u32, _RX_SET>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _RX_SET;
#[doc = "`read()` method returns [rx_set::R](rx_set::R) reader structure"]
impl crate::Readable for RX_SET {}
#[doc = "`write(|w| ..)` method takes [rx_set::W](rx_set::W) writer structure"]
impl crate::Writable for RX_SET {}
#[doc = "USB PHY Receiver Control Register"]
pub mod rx_set;
#[doc = "USB PHY Receiver Control Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [rx_clr](rx_clr) module"]
pub type RX_CLR = crate::Reg<u32, _RX_CLR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _RX_CLR;
#[doc = "`read()` method returns [rx_clr::R](rx_clr::R) reader structure"]
impl crate::Readable for RX_CLR {}
#[doc = "`write(|w| ..)` method takes [rx_clr::W](rx_clr::W) writer structure"]
impl crate::Writable for RX_CLR {}
#[doc = "USB PHY Receiver Control Register"]
pub mod rx_clr;
#[doc = "USB PHY Receiver Control Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [rx_tog](rx_tog) module"]
pub type RX_TOG = crate::Reg<u32, _RX_TOG>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _RX_TOG;
#[doc = "`read()` method returns [rx_tog::R](rx_tog::R) reader structure"]
impl crate::Readable for RX_TOG {}
#[doc = "`write(|w| ..)` method takes [rx_tog::W](rx_tog::W) writer structure"]
impl crate::Writable for RX_TOG {}
#[doc = "USB PHY Receiver Control Register"]
pub mod rx_tog;
#[doc = "USB PHY General Control Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [ctrl](ctrl) module"]
pub type CTRL = crate::Reg<u32, _CTRL>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _CTRL;
#[doc = "`read()` method returns [ctrl::R](ctrl::R) reader structure"]
impl crate::Readable for CTRL {}
#[doc = "`write(|w| ..)` method takes [ctrl::W](ctrl::W) writer structure"]
impl crate::Writable for CTRL {}
#[doc = "USB PHY General Control Register"]
pub mod ctrl;
#[doc = "USB PHY General Control Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [ctrl_set](ctrl_set) module"]
pub type CTRL_SET = crate::Reg<u32, _CTRL_SET>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _CTRL_SET;
#[doc = "`read()` method returns [ctrl_set::R](ctrl_set::R) reader structure"]
impl crate::Readable for CTRL_SET {}
#[doc = "`write(|w| ..)` method takes [ctrl_set::W](ctrl_set::W) writer structure"]
impl crate::Writable for CTRL_SET {}
#[doc = "USB PHY General Control Register"]
pub mod ctrl_set;
#[doc = "USB PHY General Control Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [ctrl_clr](ctrl_clr) module"]
pub type CTRL_CLR = crate::Reg<u32, _CTRL_CLR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _CTRL_CLR;
#[doc = "`read()` method returns [ctrl_clr::R](ctrl_clr::R) reader structure"]
impl crate::Readable for CTRL_CLR {}
#[doc = "`write(|w| ..)` method takes [ctrl_clr::W](ctrl_clr::W) writer structure"]
impl crate::Writable for CTRL_CLR {}
#[doc = "USB PHY General Control Register"]
pub mod ctrl_clr;
#[doc = "USB PHY General Control Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [ctrl_tog](ctrl_tog) module"]
pub type CTRL_TOG = crate::Reg<u32, _CTRL_TOG>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _CTRL_TOG;
#[doc = "`read()` method returns [ctrl_tog::R](ctrl_tog::R) reader structure"]
impl crate::Readable for CTRL_TOG {}
#[doc = "`write(|w| ..)` method takes [ctrl_tog::W](ctrl_tog::W) writer structure"]
impl crate::Writable for CTRL_TOG {}
#[doc = "USB PHY General Control Register"]
pub mod ctrl_tog;
#[doc = "USB PHY Status Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [status](status) module"]
pub type STATUS = crate::Reg<u32, _STATUS>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _STATUS;
#[doc = "`read()` method returns [status::R](status::R) reader structure"]
impl crate::Readable for STATUS {}
#[doc = "`write(|w| ..)` method takes [status::W](status::W) writer structure"]
impl crate::Writable for STATUS {}
#[doc = "USB PHY Status Register"]
pub mod status;
#[doc = "USB PHY Debug Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [debug](debug) module"]
pub type DEBUG = crate::Reg<u32, _DEBUG>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _DEBUG;
#[doc = "`read()` method returns [debug::R](debug::R) reader structure"]
impl crate::Readable for DEBUG {}
#[doc = "`write(|w| ..)` method takes [debug::W](debug::W) writer structure"]
impl crate::Writable for DEBUG {}
#[doc = "USB PHY Debug Register"]
pub mod debug;
#[doc = "USB PHY Debug Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [debug_set](debug_set) module"]
pub type DEBUG_SET = crate::Reg<u32, _DEBUG_SET>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _DEBUG_SET;
#[doc = "`read()` method returns [debug_set::R](debug_set::R) reader structure"]
impl crate::Readable for DEBUG_SET {}
#[doc = "`write(|w| ..)` method takes [debug_set::W](debug_set::W) writer structure"]
impl crate::Writable for DEBUG_SET {}
#[doc = "USB PHY Debug Register"]
pub mod debug_set;
#[doc = "USB PHY Debug Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [debug_clr](debug_clr) module"]
pub type DEBUG_CLR = crate::Reg<u32, _DEBUG_CLR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _DEBUG_CLR;
#[doc = "`read()` method returns [debug_clr::R](debug_clr::R) reader structure"]
impl crate::Readable for DEBUG_CLR {}
#[doc = "`write(|w| ..)` method takes [debug_clr::W](debug_clr::W) writer structure"]
impl crate::Writable for DEBUG_CLR {}
#[doc = "USB PHY Debug Register"]
pub mod debug_clr;
#[doc = "USB PHY Debug Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [debug_tog](debug_tog) module"]
pub type DEBUG_TOG = crate::Reg<u32, _DEBUG_TOG>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _DEBUG_TOG;
#[doc = "`read()` method returns [debug_tog::R](debug_tog::R) reader structure"]
impl crate::Readable for DEBUG_TOG {}
#[doc = "`write(|w| ..)` method takes [debug_tog::W](debug_tog::W) writer structure"]
impl crate::Writable for DEBUG_TOG {}
#[doc = "USB PHY Debug Register"]
pub mod debug_tog;
#[doc = "UTMI Debug Status Register 0\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [debug0_status](debug0_status) module"]
pub type DEBUG0_STATUS = crate::Reg<u32, _DEBUG0_STATUS>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _DEBUG0_STATUS;
#[doc = "`read()` method returns [debug0_status::R](debug0_status::R) reader structure"]
impl crate::Readable for DEBUG0_STATUS {}
#[doc = "UTMI Debug Status Register 0"]
pub mod debug0_status;
#[doc = "UTMI Debug Status Register 1\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [debug1](debug1) module"]
pub type DEBUG1 = crate::Reg<u32, _DEBUG1>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _DEBUG1;
#[doc = "`read()` method returns [debug1::R](debug1::R) reader structure"]
impl crate::Readable for DEBUG1 {}
#[doc = "`write(|w| ..)` method takes [debug1::W](debug1::W) writer structure"]
impl crate::Writable for DEBUG1 {}
#[doc = "UTMI Debug Status Register 1"]
pub mod debug1;
#[doc = "UTMI Debug Status Register 1\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [debug1_set](debug1_set) module"]
pub type DEBUG1_SET = crate::Reg<u32, _DEBUG1_SET>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _DEBUG1_SET;
#[doc = "`read()` method returns [debug1_set::R](debug1_set::R) reader structure"]
impl crate::Readable for DEBUG1_SET {}
#[doc = "`write(|w| ..)` method takes [debug1_set::W](debug1_set::W) writer structure"]
impl crate::Writable for DEBUG1_SET {}
#[doc = "UTMI Debug Status Register 1"]
pub mod debug1_set;
#[doc = "UTMI Debug Status Register 1\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [debug1_clr](debug1_clr) module"]
pub type DEBUG1_CLR = crate::Reg<u32, _DEBUG1_CLR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _DEBUG1_CLR;
#[doc = "`read()` method returns [debug1_clr::R](debug1_clr::R) reader structure"]
impl crate::Readable for DEBUG1_CLR {}
#[doc = "`write(|w| ..)` method takes [debug1_clr::W](debug1_clr::W) writer structure"]
impl crate::Writable for DEBUG1_CLR {}
#[doc = "UTMI Debug Status Register 1"]
pub mod debug1_clr;
#[doc = "UTMI Debug Status Register 1\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [debug1_tog](debug1_tog) module"]
pub type DEBUG1_TOG = crate::Reg<u32, _DEBUG1_TOG>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _DEBUG1_TOG;
#[doc = "`read()` method returns [debug1_tog::R](debug1_tog::R) reader structure"]
impl crate::Readable for DEBUG1_TOG {}
#[doc = "`write(|w| ..)` method takes [debug1_tog::W](debug1_tog::W) writer structure"]
impl crate::Writable for DEBUG1_TOG {}
#[doc = "UTMI Debug Status Register 1"]
pub mod debug1_tog;
#[doc = "UTMI RTL Version\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [version](version) module"]
pub type VERSION = crate::Reg<u32, _VERSION>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _VERSION;
#[doc = "`read()` method returns [version::R](version::R) reader structure"]
impl crate::Readable for VERSION {}
#[doc = "UTMI RTL Version"]
pub mod version;