Type Definition imxrt1062_pmu::misc1_set::R

type R = R<u32, MISC1_SET>;

Reader of register MISC1_SET

Methods

impl R

pub fn lvds1_clk_sel(&self) -> LVDS1_CLK_SEL_R

Bits 0:4 - This field selects the clk to be routed to anaclk1/1b.Not related to PMU.

pub fn lvds2_clk_sel(&self) -> LVDS2_CLK_SEL_R

Bits 5:9 - This field selects the clk to be routed to anaclk2/2b.Not related to PMU.

pub fn lvdsclk1_oben(&self) -> LVDSCLK1_OBEN_R

Bit 10 - This enables the LVDS output buffer for anaclk1/1b

pub fn lvdsclk2_oben(&self) -> LVDSCLK2_OBEN_R

Bit 11 - This enables the LVDS output buffer for anaclk2/2b

pub fn lvdsclk1_iben(&self) -> LVDSCLK1_IBEN_R

Bit 12 - This enables the LVDS input buffer for anaclk1/1b

pub fn lvdsclk2_iben(&self) -> LVDSCLK2_IBEN_R

Bit 13 - This enables the LVDS input buffer for anaclk2/2b

pub fn pfd_480_autogate_en(&self) -> PFD_480_AUTOGATE_EN_R

Bit 16 - This enables a feature that will clkgate (reset) all PFD_480 clocks anytime the USB1_PLL_480 is unlocked or powered off

pub fn pfd_528_autogate_en(&self) -> PFD_528_AUTOGATE_EN_R

Bit 17 - This enables a feature that will clkgate (reset) all PFD_528 clocks anytime the PLL_528 is unlocked or powered off

pub fn irq_temppanic(&self) -> IRQ_TEMPPANIC_R

Bit 27 - This status bit is set to one when the temperature sensor panic interrupt asserts for a panic high temperature

pub fn irq_templow(&self) -> IRQ_TEMPLOW_R

Bit 28 - This status bit is set to one when the temperature sensor low interrupt asserts for low temperature

pub fn irq_temphigh(&self) -> IRQ_TEMPHIGH_R

Bit 29 - This status bit is set to one when the temperature sensor high interrupt asserts for high temperature

pub fn irq_ana_bo(&self) -> IRQ_ANA_BO_R

Bit 30 - This status bit is set to one when when any of the analog regulator brownout interrupts assert

pub fn irq_dig_bo(&self) -> IRQ_DIG_BO_R

Bit 31 - This status bit is set to one when when any of the digital regulator brownout interrupts assert