#[doc = "Register `SRR` reader"]
pub type R = crate::R<SrrSpec>;
#[doc = "Register `SRR` writer"]
pub type W = crate::W<SrrSpec>;
#[doc = "Field `SET0` reader - SET0"]
pub type Set0R = crate::BitReader;
#[doc = "Field `SET0` writer - SET0"]
pub type Set0W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SET1` reader - SET1"]
pub type Set1R = crate::BitReader;
#[doc = "Field `SET1` writer - SET1"]
pub type Set1W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SET2` reader - SET2"]
pub type Set2R = crate::BitReader;
#[doc = "Field `SET2` writer - SET2"]
pub type Set2W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SET3` reader - SET3"]
pub type Set3R = crate::BitReader;
#[doc = "Field `SET3` writer - SET3"]
pub type Set3W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SET4` reader - SET4"]
pub type Set4R = crate::BitReader;
#[doc = "Field `SET4` writer - SET4"]
pub type Set4W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SET5` reader - SET5"]
pub type Set5R = crate::BitReader;
#[doc = "Field `SET5` writer - SET5"]
pub type Set5W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SET6` reader - SET6"]
pub type Set6R = crate::BitReader;
#[doc = "Field `SET6` writer - SET6"]
pub type Set6W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SET7` reader - SET7"]
pub type Set7R = crate::BitReader;
#[doc = "Field `SET7` writer - SET7"]
pub type Set7W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SET8` reader - SET8"]
pub type Set8R = crate::BitReader;
#[doc = "Field `SET8` writer - SET8"]
pub type Set8W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SET9` reader - SET9"]
pub type Set9R = crate::BitReader;
#[doc = "Field `SET9` writer - SET9"]
pub type Set9W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SET10` reader - SET10"]
pub type Set10R = crate::BitReader;
#[doc = "Field `SET10` writer - SET10"]
pub type Set10W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SET11` reader - SET11"]
pub type Set11R = crate::BitReader;
#[doc = "Field `SET11` writer - SET11"]
pub type Set11W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SET12` reader - SET12"]
pub type Set12R = crate::BitReader;
#[doc = "Field `SET12` writer - SET12"]
pub type Set12W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SET13` reader - SET13"]
pub type Set13R = crate::BitReader;
#[doc = "Field `SET13` writer - SET13"]
pub type Set13W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SET14` reader - SET14"]
pub type Set14R = crate::BitReader;
#[doc = "Field `SET14` writer - SET14"]
pub type Set14W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SET15` reader - SET15"]
pub type Set15R = crate::BitReader;
#[doc = "Field `SET15` writer - SET15"]
pub type Set15W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST0` reader - RST0"]
pub type Rst0R = crate::BitReader;
#[doc = "Field `RST0` writer - RST0"]
pub type Rst0W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST1` reader - RST1"]
pub type Rst1R = crate::BitReader;
#[doc = "Field `RST1` writer - RST1"]
pub type Rst1W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST2` reader - RST2"]
pub type Rst2R = crate::BitReader;
#[doc = "Field `RST2` writer - RST2"]
pub type Rst2W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST3` reader - RST3"]
pub type Rst3R = crate::BitReader;
#[doc = "Field `RST3` writer - RST3"]
pub type Rst3W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST4` reader - RST4"]
pub type Rst4R = crate::BitReader;
#[doc = "Field `RST4` writer - RST4"]
pub type Rst4W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST5` reader - RST5"]
pub type Rst5R = crate::BitReader;
#[doc = "Field `RST5` writer - RST5"]
pub type Rst5W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST6` reader - RST6"]
pub type Rst6R = crate::BitReader;
#[doc = "Field `RST6` writer - RST6"]
pub type Rst6W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST7` reader - RST7"]
pub type Rst7R = crate::BitReader;
#[doc = "Field `RST7` writer - RST7"]
pub type Rst7W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST8` reader - RST8"]
pub type Rst8R = crate::BitReader;
#[doc = "Field `RST8` writer - RST8"]
pub type Rst8W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST9` reader - RST9"]
pub type Rst9R = crate::BitReader;
#[doc = "Field `RST9` writer - RST9"]
pub type Rst9W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST10` reader - RST10"]
pub type Rst10R = crate::BitReader;
#[doc = "Field `RST10` writer - RST10"]
pub type Rst10W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST11` reader - RST11"]
pub type Rst11R = crate::BitReader;
#[doc = "Field `RST11` writer - RST11"]
pub type Rst11W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST12` reader - RST12"]
pub type Rst12R = crate::BitReader;
#[doc = "Field `RST12` writer - RST12"]
pub type Rst12W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST13` reader - RST13"]
pub type Rst13R = crate::BitReader;
#[doc = "Field `RST13` writer - RST13"]
pub type Rst13W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST14` reader - RST14"]
pub type Rst14R = crate::BitReader;
#[doc = "Field `RST14` writer - RST14"]
pub type Rst14W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RST15` reader - RST15"]
pub type Rst15R = crate::BitReader;
#[doc = "Field `RST15` writer - RST15"]
pub type Rst15W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
    #[doc = "Bit 0 - SET0"]
    #[inline(always)]
    pub fn set0(&self) -> Set0R {
        Set0R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 1 - SET1"]
    #[inline(always)]
    pub fn set1(&self) -> Set1R {
        Set1R::new(((self.bits >> 1) & 1) != 0)
    }
    #[doc = "Bit 2 - SET2"]
    #[inline(always)]
    pub fn set2(&self) -> Set2R {
        Set2R::new(((self.bits >> 2) & 1) != 0)
    }
    #[doc = "Bit 3 - SET3"]
    #[inline(always)]
    pub fn set3(&self) -> Set3R {
        Set3R::new(((self.bits >> 3) & 1) != 0)
    }
    #[doc = "Bit 4 - SET4"]
    #[inline(always)]
    pub fn set4(&self) -> Set4R {
        Set4R::new(((self.bits >> 4) & 1) != 0)
    }
    #[doc = "Bit 5 - SET5"]
    #[inline(always)]
    pub fn set5(&self) -> Set5R {
        Set5R::new(((self.bits >> 5) & 1) != 0)
    }
    #[doc = "Bit 6 - SET6"]
    #[inline(always)]
    pub fn set6(&self) -> Set6R {
        Set6R::new(((self.bits >> 6) & 1) != 0)
    }
    #[doc = "Bit 7 - SET7"]
    #[inline(always)]
    pub fn set7(&self) -> Set7R {
        Set7R::new(((self.bits >> 7) & 1) != 0)
    }
    #[doc = "Bit 8 - SET8"]
    #[inline(always)]
    pub fn set8(&self) -> Set8R {
        Set8R::new(((self.bits >> 8) & 1) != 0)
    }
    #[doc = "Bit 9 - SET9"]
    #[inline(always)]
    pub fn set9(&self) -> Set9R {
        Set9R::new(((self.bits >> 9) & 1) != 0)
    }
    #[doc = "Bit 10 - SET10"]
    #[inline(always)]
    pub fn set10(&self) -> Set10R {
        Set10R::new(((self.bits >> 10) & 1) != 0)
    }
    #[doc = "Bit 11 - SET11"]
    #[inline(always)]
    pub fn set11(&self) -> Set11R {
        Set11R::new(((self.bits >> 11) & 1) != 0)
    }
    #[doc = "Bit 12 - SET12"]
    #[inline(always)]
    pub fn set12(&self) -> Set12R {
        Set12R::new(((self.bits >> 12) & 1) != 0)
    }
    #[doc = "Bit 13 - SET13"]
    #[inline(always)]
    pub fn set13(&self) -> Set13R {
        Set13R::new(((self.bits >> 13) & 1) != 0)
    }
    #[doc = "Bit 14 - SET14"]
    #[inline(always)]
    pub fn set14(&self) -> Set14R {
        Set14R::new(((self.bits >> 14) & 1) != 0)
    }
    #[doc = "Bit 15 - SET15"]
    #[inline(always)]
    pub fn set15(&self) -> Set15R {
        Set15R::new(((self.bits >> 15) & 1) != 0)
    }
    #[doc = "Bit 16 - RST0"]
    #[inline(always)]
    pub fn rst0(&self) -> Rst0R {
        Rst0R::new(((self.bits >> 16) & 1) != 0)
    }
    #[doc = "Bit 17 - RST1"]
    #[inline(always)]
    pub fn rst1(&self) -> Rst1R {
        Rst1R::new(((self.bits >> 17) & 1) != 0)
    }
    #[doc = "Bit 18 - RST2"]
    #[inline(always)]
    pub fn rst2(&self) -> Rst2R {
        Rst2R::new(((self.bits >> 18) & 1) != 0)
    }
    #[doc = "Bit 19 - RST3"]
    #[inline(always)]
    pub fn rst3(&self) -> Rst3R {
        Rst3R::new(((self.bits >> 19) & 1) != 0)
    }
    #[doc = "Bit 20 - RST4"]
    #[inline(always)]
    pub fn rst4(&self) -> Rst4R {
        Rst4R::new(((self.bits >> 20) & 1) != 0)
    }
    #[doc = "Bit 21 - RST5"]
    #[inline(always)]
    pub fn rst5(&self) -> Rst5R {
        Rst5R::new(((self.bits >> 21) & 1) != 0)
    }
    #[doc = "Bit 22 - RST6"]
    #[inline(always)]
    pub fn rst6(&self) -> Rst6R {
        Rst6R::new(((self.bits >> 22) & 1) != 0)
    }
    #[doc = "Bit 23 - RST7"]
    #[inline(always)]
    pub fn rst7(&self) -> Rst7R {
        Rst7R::new(((self.bits >> 23) & 1) != 0)
    }
    #[doc = "Bit 24 - RST8"]
    #[inline(always)]
    pub fn rst8(&self) -> Rst8R {
        Rst8R::new(((self.bits >> 24) & 1) != 0)
    }
    #[doc = "Bit 25 - RST9"]
    #[inline(always)]
    pub fn rst9(&self) -> Rst9R {
        Rst9R::new(((self.bits >> 25) & 1) != 0)
    }
    #[doc = "Bit 26 - RST10"]
    #[inline(always)]
    pub fn rst10(&self) -> Rst10R {
        Rst10R::new(((self.bits >> 26) & 1) != 0)
    }
    #[doc = "Bit 27 - RST11"]
    #[inline(always)]
    pub fn rst11(&self) -> Rst11R {
        Rst11R::new(((self.bits >> 27) & 1) != 0)
    }
    #[doc = "Bit 28 - RST12"]
    #[inline(always)]
    pub fn rst12(&self) -> Rst12R {
        Rst12R::new(((self.bits >> 28) & 1) != 0)
    }
    #[doc = "Bit 29 - RST13"]
    #[inline(always)]
    pub fn rst13(&self) -> Rst13R {
        Rst13R::new(((self.bits >> 29) & 1) != 0)
    }
    #[doc = "Bit 30 - RST14"]
    #[inline(always)]
    pub fn rst14(&self) -> Rst14R {
        Rst14R::new(((self.bits >> 30) & 1) != 0)
    }
    #[doc = "Bit 31 - RST15"]
    #[inline(always)]
    pub fn rst15(&self) -> Rst15R {
        Rst15R::new(((self.bits >> 31) & 1) != 0)
    }
}
impl W {
    #[doc = "Bit 0 - SET0"]
    #[inline(always)]
    #[must_use]
    pub fn set0(&mut self) -> Set0W<SrrSpec> {
        Set0W::new(self, 0)
    }
    #[doc = "Bit 1 - SET1"]
    #[inline(always)]
    #[must_use]
    pub fn set1(&mut self) -> Set1W<SrrSpec> {
        Set1W::new(self, 1)
    }
    #[doc = "Bit 2 - SET2"]
    #[inline(always)]
    #[must_use]
    pub fn set2(&mut self) -> Set2W<SrrSpec> {
        Set2W::new(self, 2)
    }
    #[doc = "Bit 3 - SET3"]
    #[inline(always)]
    #[must_use]
    pub fn set3(&mut self) -> Set3W<SrrSpec> {
        Set3W::new(self, 3)
    }
    #[doc = "Bit 4 - SET4"]
    #[inline(always)]
    #[must_use]
    pub fn set4(&mut self) -> Set4W<SrrSpec> {
        Set4W::new(self, 4)
    }
    #[doc = "Bit 5 - SET5"]
    #[inline(always)]
    #[must_use]
    pub fn set5(&mut self) -> Set5W<SrrSpec> {
        Set5W::new(self, 5)
    }
    #[doc = "Bit 6 - SET6"]
    #[inline(always)]
    #[must_use]
    pub fn set6(&mut self) -> Set6W<SrrSpec> {
        Set6W::new(self, 6)
    }
    #[doc = "Bit 7 - SET7"]
    #[inline(always)]
    #[must_use]
    pub fn set7(&mut self) -> Set7W<SrrSpec> {
        Set7W::new(self, 7)
    }
    #[doc = "Bit 8 - SET8"]
    #[inline(always)]
    #[must_use]
    pub fn set8(&mut self) -> Set8W<SrrSpec> {
        Set8W::new(self, 8)
    }
    #[doc = "Bit 9 - SET9"]
    #[inline(always)]
    #[must_use]
    pub fn set9(&mut self) -> Set9W<SrrSpec> {
        Set9W::new(self, 9)
    }
    #[doc = "Bit 10 - SET10"]
    #[inline(always)]
    #[must_use]
    pub fn set10(&mut self) -> Set10W<SrrSpec> {
        Set10W::new(self, 10)
    }
    #[doc = "Bit 11 - SET11"]
    #[inline(always)]
    #[must_use]
    pub fn set11(&mut self) -> Set11W<SrrSpec> {
        Set11W::new(self, 11)
    }
    #[doc = "Bit 12 - SET12"]
    #[inline(always)]
    #[must_use]
    pub fn set12(&mut self) -> Set12W<SrrSpec> {
        Set12W::new(self, 12)
    }
    #[doc = "Bit 13 - SET13"]
    #[inline(always)]
    #[must_use]
    pub fn set13(&mut self) -> Set13W<SrrSpec> {
        Set13W::new(self, 13)
    }
    #[doc = "Bit 14 - SET14"]
    #[inline(always)]
    #[must_use]
    pub fn set14(&mut self) -> Set14W<SrrSpec> {
        Set14W::new(self, 14)
    }
    #[doc = "Bit 15 - SET15"]
    #[inline(always)]
    #[must_use]
    pub fn set15(&mut self) -> Set15W<SrrSpec> {
        Set15W::new(self, 15)
    }
    #[doc = "Bit 16 - RST0"]
    #[inline(always)]
    #[must_use]
    pub fn rst0(&mut self) -> Rst0W<SrrSpec> {
        Rst0W::new(self, 16)
    }
    #[doc = "Bit 17 - RST1"]
    #[inline(always)]
    #[must_use]
    pub fn rst1(&mut self) -> Rst1W<SrrSpec> {
        Rst1W::new(self, 17)
    }
    #[doc = "Bit 18 - RST2"]
    #[inline(always)]
    #[must_use]
    pub fn rst2(&mut self) -> Rst2W<SrrSpec> {
        Rst2W::new(self, 18)
    }
    #[doc = "Bit 19 - RST3"]
    #[inline(always)]
    #[must_use]
    pub fn rst3(&mut self) -> Rst3W<SrrSpec> {
        Rst3W::new(self, 19)
    }
    #[doc = "Bit 20 - RST4"]
    #[inline(always)]
    #[must_use]
    pub fn rst4(&mut self) -> Rst4W<SrrSpec> {
        Rst4W::new(self, 20)
    }
    #[doc = "Bit 21 - RST5"]
    #[inline(always)]
    #[must_use]
    pub fn rst5(&mut self) -> Rst5W<SrrSpec> {
        Rst5W::new(self, 21)
    }
    #[doc = "Bit 22 - RST6"]
    #[inline(always)]
    #[must_use]
    pub fn rst6(&mut self) -> Rst6W<SrrSpec> {
        Rst6W::new(self, 22)
    }
    #[doc = "Bit 23 - RST7"]
    #[inline(always)]
    #[must_use]
    pub fn rst7(&mut self) -> Rst7W<SrrSpec> {
        Rst7W::new(self, 23)
    }
    #[doc = "Bit 24 - RST8"]
    #[inline(always)]
    #[must_use]
    pub fn rst8(&mut self) -> Rst8W<SrrSpec> {
        Rst8W::new(self, 24)
    }
    #[doc = "Bit 25 - RST9"]
    #[inline(always)]
    #[must_use]
    pub fn rst9(&mut self) -> Rst9W<SrrSpec> {
        Rst9W::new(self, 25)
    }
    #[doc = "Bit 26 - RST10"]
    #[inline(always)]
    #[must_use]
    pub fn rst10(&mut self) -> Rst10W<SrrSpec> {
        Rst10W::new(self, 26)
    }
    #[doc = "Bit 27 - RST11"]
    #[inline(always)]
    #[must_use]
    pub fn rst11(&mut self) -> Rst11W<SrrSpec> {
        Rst11W::new(self, 27)
    }
    #[doc = "Bit 28 - RST12"]
    #[inline(always)]
    #[must_use]
    pub fn rst12(&mut self) -> Rst12W<SrrSpec> {
        Rst12W::new(self, 28)
    }
    #[doc = "Bit 29 - RST13"]
    #[inline(always)]
    #[must_use]
    pub fn rst13(&mut self) -> Rst13W<SrrSpec> {
        Rst13W::new(self, 29)
    }
    #[doc = "Bit 30 - RST14"]
    #[inline(always)]
    #[must_use]
    pub fn rst14(&mut self) -> Rst14W<SrrSpec> {
        Rst14W::new(self, 30)
    }
    #[doc = "Bit 31 - RST15"]
    #[inline(always)]
    #[must_use]
    pub fn rst15(&mut self) -> Rst15W<SrrSpec> {
        Rst15W::new(self, 31)
    }
}
#[doc = "SRR\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`srr::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`srr::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct SrrSpec;
impl crate::RegisterSpec for SrrSpec {
    type Ux = u32;
}
#[doc = "`read()` method returns [`srr::R`](R) reader structure"]
impl crate::Readable for SrrSpec {}
#[doc = "`write(|w| ..)` method takes [`srr::W`](W) writer structure"]
impl crate::Writable for SrrSpec {
    type Safety = crate::Unsafe;
    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets SRR to value 0"]
impl crate::Resettable for SrrSpec {
    const RESET_VALUE: u32 = 0;
}