[−][src]Struct grpcio::StreamingCallSink
A sink for client streaming call and duplex streaming call.
To close the sink properly, you should call close before dropping.
Implementations
impl<Req> StreamingCallSink<Req>[src]
pub fn enhance_batch(&mut self, flag: bool)[src]
By default it always sends messages with their configured buffer hint. But when the
enhance_batch is enabled, messages will be batched together as many as possible.
The rules are listed as below:
- All messages except the last one will be sent with
buffer_hintset to true. - The last message will also be sent with
buffer_hintset to true unless any message is offered with buffer hint set to false.
No matter enhance_batch is true or false, it's recommended to follow the contract of
Sink and call poll_flush to ensure messages are handled by gRPC C Core.
pub fn cancel(&mut self)[src]
Trait Implementations
impl<P> Drop for StreamingCallSink<P>[src]
pub fn drop(&mut self)[src]
The corresponding RPC will be canceled if the sink did not call
close before dropping.
impl<Req> Sink<(Req, WriteFlags)> for StreamingCallSink<Req>[src]
type Error = Error
The type of value produced by the sink when an error occurs.
pub fn poll_ready(
self: Pin<&mut Self>,
cx: &mut Context<'_>
) -> Poll<Result<()>>[src]
self: Pin<&mut Self>,
cx: &mut Context<'_>
) -> Poll<Result<()>>
pub fn start_send(
self: Pin<&mut Self>,
(msg, flags): (Req, WriteFlags)
) -> Result<()>[src]
self: Pin<&mut Self>,
(msg, flags): (Req, WriteFlags)
) -> Result<()>
pub fn poll_flush(
self: Pin<&mut Self>,
cx: &mut Context<'_>
) -> Poll<Result<()>>[src]
self: Pin<&mut Self>,
cx: &mut Context<'_>
) -> Poll<Result<()>>
pub fn poll_close(
self: Pin<&mut Self>,
cx: &mut Context<'_>
) -> Poll<Result<()>>[src]
self: Pin<&mut Self>,
cx: &mut Context<'_>
) -> Poll<Result<()>>
Auto Trait Implementations
impl<Req> !RefUnwindSafe for StreamingCallSink<Req>[src]
impl<Req> Send for StreamingCallSink<Req>[src]
impl<Req> Sync for StreamingCallSink<Req>[src]
impl<Req> Unpin for StreamingCallSink<Req>[src]
impl<Req> !UnwindSafe for StreamingCallSink<Req>[src]
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized, [src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized, [src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized, [src]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut T[src]
impl<T> From<T> for T[src]
impl<T, U> Into<U> for T where
U: From<T>, [src]
U: From<T>,
impl<T, Item> SinkExt<Item> for T where
T: Sink<Item> + ?Sized, [src]
T: Sink<Item> + ?Sized,
pub fn with<U, Fut, F, E>(self, f: F) -> With<Self, Item, U, Fut, F> where
F: FnMut(U) -> Fut,
E: From<Self::Error>,
Fut: Future<Output = Result<Item, E>>, [src]
F: FnMut(U) -> Fut,
E: From<Self::Error>,
Fut: Future<Output = Result<Item, E>>,
pub fn with_flat_map<U, St, F>(self, f: F) -> WithFlatMap<Self, Item, U, St, F> where
F: FnMut(U) -> St,
St: Stream<Item = Result<Item, Self::Error>>, [src]
F: FnMut(U) -> St,
St: Stream<Item = Result<Item, Self::Error>>,
pub fn sink_map_err<E, F>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::Error) -> E, [src]
F: FnOnce(Self::Error) -> E,
pub fn sink_err_into<E>(self) -> SinkErrInto<Self, Item, E> where
Self::Error: Into<E>, [src]
Self::Error: Into<E>,
pub fn buffer(self, capacity: usize) -> Buffer<Self, Item>[src]
pub fn close(&mut self) -> Close<'_, Self, Item> where
Self: Unpin, [src]
Self: Unpin,
pub fn fanout<Si>(self, other: Si) -> Fanout<Self, Si> where
Item: Clone,
Si: Sink<Item, Error = Self::Error>, [src]
Item: Clone,
Si: Sink<Item, Error = Self::Error>,
pub fn flush(&mut self) -> Flush<'_, Self, Item> where
Self: Unpin, [src]
Self: Unpin,
pub fn send(&mut self, item: Item) -> Send<'_, Self, Item> where
Self: Unpin, [src]
Self: Unpin,
pub fn send_all<St>(&'a mut self, stream: &'a mut St) -> SendAll<'a, Self, St> where
Self: Unpin,
St: TryStream<Ok = Item, Error = Self::Error> + Stream + Unpin + ?Sized, [src]
Self: Unpin,
St: TryStream<Ok = Item, Error = Self::Error> + Stream + Unpin + ?Sized,
pub fn left_sink<Si2>(self) -> Either<Self, Si2> where
Si2: Sink<Item, Error = Self::Error>, [src]
Si2: Sink<Item, Error = Self::Error>,
pub fn right_sink<Si1>(self) -> Either<Si1, Self> where
Si1: Sink<Item, Error = Self::Error>, [src]
Si1: Sink<Item, Error = Self::Error>,
pub fn poll_ready_unpin(
&mut self,
cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>> where
Self: Unpin, [src]
&mut self,
cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>> where
Self: Unpin,
pub fn start_send_unpin(&mut self, item: Item) -> Result<(), Self::Error> where
Self: Unpin, [src]
Self: Unpin,
pub fn poll_flush_unpin(
&mut self,
cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>> where
Self: Unpin, [src]
&mut self,
cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>> where
Self: Unpin,
pub fn poll_close_unpin(
&mut self,
cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>> where
Self: Unpin, [src]
&mut self,
cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>> where
Self: Unpin,
impl<T, U> TryFrom<U> for T where
U: Into<T>, [src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>, [src]
U: TryFrom<T>,