Struct gpio_cdev::LineEventHandle [−][src]
pub struct LineEventHandle { /* fields omitted */ }
Expand description
Handle for retrieving events from the kernel for a line
In order for userspace to retrieve incoming events on a GPIO,
an event handle must be requested from the chip using
Line::events
.
On success, the kernel creates an anonymous file descriptor
for reading events. This structure is the go-between for callers
and that file descriptor.
Implementations
Retrieve the next event from the kernel for this line
This blocks while there is not another event available from the
kernel for the line which matches the subscription criteria
specified in the event_flags
when the handle was created.
Request the current state of this Line from the kernel
This value should be 0 or 1 which a “1” representing that the line is active. Usually this means that the line is at logic-level high but it could mean the opposite if the line has been marked as being ACTIVE_LOW.
Trait Implementations
impl AsRef<LineEventHandle> for AsyncLineEventHandle
This is supported on crate feature async-tokio
only.
impl AsRef<LineEventHandle> for AsyncLineEventHandle
async-tokio
only.fn as_ref(&self) -> &LineEventHandleⓘNotable traits for LineEventHandleimpl Iterator for LineEventHandle type Item = Result<LineEvent, Error>;
fn as_ref(&self) -> &LineEventHandleⓘNotable traits for LineEventHandleimpl Iterator for LineEventHandle type Item = Result<LineEvent, Error>;
impl Iterator for LineEventHandle type Item = Result<LineEvent, Error>;
Performs the conversion.
Advances the iterator and returns the next value. Read more
Returns the bounds on the remaining length of the iterator. Read more
Consumes the iterator, counting the number of iterations and returning it. Read more
Consumes the iterator, returning the last element. Read more
🔬 This is a nightly-only experimental API. (iter_advance_by
)
recently added
Advances the iterator by n
elements. Read more
Returns the n
th element of the iterator. Read more
Creates an iterator starting at the same point, but stepping by the given amount at each iteration. Read more
1.0.0[src]fn chain<U>(self, other: U) -> Chain<Self, <U as IntoIterator>::IntoIter> where
U: IntoIterator<Item = Self::Item>,
fn chain<U>(self, other: U) -> Chain<Self, <U as IntoIterator>::IntoIter> where
U: IntoIterator<Item = Self::Item>,
Takes two iterators and creates a new iterator over both in sequence. Read more
1.0.0[src]fn zip<U>(self, other: U) -> Zip<Self, <U as IntoIterator>::IntoIter> where
U: IntoIterator,
fn zip<U>(self, other: U) -> Zip<Self, <U as IntoIterator>::IntoIter> where
U: IntoIterator,
‘Zips up’ two iterators into a single iterator of pairs. Read more
1.56.0[src]fn intersperse(self, separator: Self::Item) -> Intersperse<Self> where
Self::Item: Clone,
fn intersperse(self, separator: Self::Item) -> Intersperse<Self> where
Self::Item: Clone,
Creates a new iterator which places a copy of separator
between adjacent
items of the original iterator. Read more
1.56.0[src]fn intersperse_with<G>(self, separator: G) -> IntersperseWith<Self, G> where
G: FnMut() -> Self::Item,
fn intersperse_with<G>(self, separator: G) -> IntersperseWith<Self, G> where
G: FnMut() -> Self::Item,
Creates a new iterator which places an item generated by separator
between adjacent items of the original iterator. Read more
Takes a closure and creates an iterator which calls that closure on each element. Read more
Calls a closure on each element of an iterator. Read more
Creates an iterator which uses a closure to determine if an element should be yielded. Read more
Creates an iterator that both filters and maps. Read more
Creates an iterator which gives the current iteration count as well as the next value. Read more
Creates an iterator that yields elements based on a predicate. Read more
🔬 This is a nightly-only experimental API. (iter_map_while
)
recently added
Creates an iterator that both yields elements based on a predicate and maps. Read more
Creates an iterator that skips the first n
elements. Read more
Creates an iterator that yields the first n
elements, or fewer
if the underlying iterator ends sooner. Read more
Creates an iterator that works like map, but flattens nested structure. Read more
Creates an iterator that flattens nested structure. Read more
Does something with each element of an iterator, passing the value on. Read more
Transforms an iterator into a collection. Read more
Consumes an iterator, creating two collections from it. Read more
fn partition_in_place<'a, T, P>(self, predicate: P) -> usize where
Self: DoubleEndedIterator<Item = &'a mut T>,
P: FnMut(&T) -> bool,
T: 'a,
fn partition_in_place<'a, T, P>(self, predicate: P) -> usize where
Self: DoubleEndedIterator<Item = &'a mut T>,
P: FnMut(&T) -> bool,
T: 'a,
🔬 This is a nightly-only experimental API. (iter_partition_in_place
)
new API
Reorders the elements of this iterator in-place according to the given predicate,
such that all those that return true
precede all those that return false
.
Returns the number of true
elements found. Read more
🔬 This is a nightly-only experimental API. (iter_is_partitioned
)
new API
Checks if the elements of this iterator are partitioned according to the given predicate,
such that all those that return true
precede all those that return false
. Read more
An iterator method that applies a function as long as it returns successfully, producing a single, final value. Read more
An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error. Read more
Folds every element into an accumulator by applying an operation, returning the final result. Read more
Reduces the elements to a single one, by repeatedly applying a reducing operation. Read more
Tests if every element of the iterator matches a predicate. Read more
Tests if any element of the iterator matches a predicate. Read more
Searches for an element of an iterator that satisfies a predicate. Read more
Applies function to the elements of iterator and returns the first non-none result. Read more
🔬 This is a nightly-only experimental API. (try_find
)
new API
Applies function to the elements of iterator and returns the first true result or the first error. Read more
Searches for an element in an iterator, returning its index. Read more
1.0.0[src]fn rposition<P>(&mut self, predicate: P) -> Option<usize> where
Self: ExactSizeIterator + DoubleEndedIterator,
P: FnMut(Self::Item) -> bool,
fn rposition<P>(&mut self, predicate: P) -> Option<usize> where
Self: ExactSizeIterator + DoubleEndedIterator,
P: FnMut(Self::Item) -> bool,
Searches for an element in an iterator from the right, returning its index. Read more
Returns the maximum element of an iterator. Read more
Returns the minimum element of an iterator. Read more
Returns the element that gives the maximum value from the specified function. Read more
Returns the element that gives the maximum value with respect to the specified comparison function. Read more
Returns the element that gives the minimum value from the specified function. Read more
Returns the element that gives the minimum value with respect to the specified comparison function. Read more
Reverses an iterator’s direction. Read more
Converts an iterator of pairs into a pair of containers. Read more
Creates an iterator which copies all of its elements. Read more
Sums the elements of an iterator. Read more
Iterates over the entire iterator, multiplying all the elements Read more
Lexicographically compares the elements of this Iterator
with those
of another. Read more
fn cmp_by<I, F>(self, other: I, cmp: F) -> Ordering where
F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Ordering,
I: IntoIterator,
fn cmp_by<I, F>(self, other: I, cmp: F) -> Ordering where
F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Ordering,
I: IntoIterator,
iter_order_by
)Lexicographically compares the elements of this Iterator
with those
of another with respect to the specified comparison function. Read more
1.5.0[src]fn partial_cmp<I>(self, other: I) -> Option<Ordering> where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
fn partial_cmp<I>(self, other: I) -> Option<Ordering> where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
Lexicographically compares the elements of this Iterator
with those
of another. Read more
fn partial_cmp_by<I, F>(self, other: I, partial_cmp: F) -> Option<Ordering> where
F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Option<Ordering>,
I: IntoIterator,
fn partial_cmp_by<I, F>(self, other: I, partial_cmp: F) -> Option<Ordering> where
F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Option<Ordering>,
I: IntoIterator,
iter_order_by
)Lexicographically compares the elements of this Iterator
with those
of another with respect to the specified comparison function. Read more
1.5.0[src]fn eq<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialEq<<I as IntoIterator>::Item>,
fn eq<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialEq<<I as IntoIterator>::Item>,
fn eq_by<I, F>(self, other: I, eq: F) -> bool where
F: FnMut(Self::Item, <I as IntoIterator>::Item) -> bool,
I: IntoIterator,
fn eq_by<I, F>(self, other: I, eq: F) -> bool where
F: FnMut(Self::Item, <I as IntoIterator>::Item) -> bool,
I: IntoIterator,
iter_order_by
)1.5.0[src]fn ne<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialEq<<I as IntoIterator>::Item>,
fn ne<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialEq<<I as IntoIterator>::Item>,
1.5.0[src]fn lt<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
fn lt<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
Determines if the elements of this Iterator
are lexicographically
less than those of another. Read more
1.5.0[src]fn le<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
fn le<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
Determines if the elements of this Iterator
are lexicographically
less or equal to those of another. Read more
1.5.0[src]fn gt<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
fn gt<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
Determines if the elements of this Iterator
are lexicographically
greater than those of another. Read more
1.5.0[src]fn ge<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
fn ge<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
Determines if the elements of this Iterator
are lexicographically
greater than or equal to those of another. Read more
🔬 This is a nightly-only experimental API. (is_sorted
)
new API
Checks if the elements of this iterator are sorted. Read more
🔬 This is a nightly-only experimental API. (is_sorted
)
new API
Checks if the elements of this iterator are sorted using the given comparator function. Read more
fn is_sorted_by_key<F, K>(self, f: F) -> bool where
K: PartialOrd<K>,
F: FnMut(Self::Item) -> K,
fn is_sorted_by_key<F, K>(self, f: F) -> bool where
K: PartialOrd<K>,
F: FnMut(Self::Item) -> K,
🔬 This is a nightly-only experimental API. (is_sorted
)
new API
Checks if the elements of this iterator are sorted using the given key extraction function. Read more