Module esp32c2::dma::out_conf0_ch0
source · [−]Expand description
DMA_OUT_CONF0_CH0_REG.
Structs
DMA_OUT_CONF0_CH0_REG.
Register OUT_CONF0_CH0 reader
Register OUT_CONF0_CH0 writer
Type Definitions
Field OUTDSCR_BURST_EN_CH0 reader - Set this bit to 1 to enable INCR burst transfer for Tx channel 0 reading link descriptor when accessing internal SRAM.
Field OUTDSCR_BURST_EN_CH0 writer - Set this bit to 1 to enable INCR burst transfer for Tx channel 0 reading link descriptor when accessing internal SRAM.
Field OUT_AUTO_WRBACK_CH0 reader - Set this bit to enable automatic outlink-writeback when all the data in tx buffer has been transmitted.
Field OUT_AUTO_WRBACK_CH0 writer - Set this bit to enable automatic outlink-writeback when all the data in tx buffer has been transmitted.
Field OUT_DATA_BURST_EN_CH0 reader - Set this bit to 1 to enable INCR burst transfer for Tx channel 0 transmitting data when accessing internal SRAM.
Field OUT_DATA_BURST_EN_CH0 writer - Set this bit to 1 to enable INCR burst transfer for Tx channel 0 transmitting data when accessing internal SRAM.
Field OUT_EOF_MODE_CH0 reader - EOF flag generation mode when transmitting data. 1: EOF flag for Tx channel 0 is generated when data need to transmit has been popped from FIFO in DMA
Field OUT_EOF_MODE_CH0 writer - EOF flag generation mode when transmitting data. 1: EOF flag for Tx channel 0 is generated when data need to transmit has been popped from FIFO in DMA
Field OUT_LOOP_TEST_CH0 reader - reserved
Field OUT_LOOP_TEST_CH0 writer - reserved
Field OUT_RST_CH0 reader - This bit is used to reset DMA channel 0 Tx FSM and Tx FIFO pointer.
Field OUT_RST_CH0 writer - This bit is used to reset DMA channel 0 Tx FSM and Tx FIFO pointer.