[−][src]Struct efr32xg1::pcnt0::ctrl::W
Value to write to the register
Methods
impl W
[src]
impl W
pub fn reset_value() -> W | [src] |
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self | [src] |
Writes raw bits to the register
pub fn mode(&mut self) -> _MODEW | [src] |
Bits 0:2 - Mode Select
pub fn filt(&mut self) -> _FILTW | [src] |
Bit 3 - Enable Digital Pulse Width Filter
pub fn rsten(&mut self) -> _RSTENW | [src] |
Bit 4 - Enable PCNT Clock Domain Reset
pub fn cntrsten(&mut self) -> _CNTRSTENW | [src] |
Bit 5 - Enable CNT Reset
pub fn auxcntrsten(&mut self) -> _AUXCNTRSTENW | [src] |
Bit 6 - Enable AUXCNT Reset
pub fn debughalt(&mut self) -> _DEBUGHALTW | [src] |
Bit 7 - Debug Mode Halt Enable
pub fn hyst(&mut self) -> _HYSTW | [src] |
Bit 8 - Enable Hysteresis
pub fn s1cdir(&mut self) -> _S1CDIRW | [src] |
Bit 9 - Count Direction Determined By S1
pub fn cntev(&mut self) -> _CNTEVW | [src] |
Bits 10:11 - Controls When the Counter Counts
pub fn auxcntev(&mut self) -> _AUXCNTEVW | [src] |
Bits 12:13 - Controls When the Auxiliary Counter Counts
pub fn cntdir(&mut self) -> _CNTDIRW | [src] |
Bit 14 - Non-Quadrature Mode Counter Direction Control
pub fn edge(&mut self) -> _EDGEW | [src] |
Bit 15 - Edge Select
pub fn tccmode(&mut self) -> _TCCMODEW | [src] |
Bits 16:17 - Sets the Mode for Triggered Compare and Clear
pub fn tccpresc(&mut self) -> _TCCPRESCW | [src] |
Bits 19:20 - Set the LFA Prescaler for Triggered Compare and Clear
pub fn tcccomp(&mut self) -> _TCCCOMPW | [src] |
Bits 22:23 - Triggered Compare and Clear Compare Mode
pub fn prsgateen(&mut self) -> _PRSGATEENW | [src] |
Bit 24 - PRS Gate Enable
pub fn tccprspol(&mut self) -> _TCCPRSPOLW | [src] |
Bit 25 - TCC PRS Polarity Select
pub fn tccprssel(&mut self) -> _TCCPRSSELW | [src] |
Bits 26:29 - TCC PRS Channel Select
pub fn topbhfsel(&mut self) -> _TOPBHFSELW | [src] |
Bit 31 - TOPB High Frequency Value Select
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error> | [src] |
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error> | [src] |
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T | [src] |
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId | [src] |