Struct cc2650::vims::ctl::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn stats_clr(&self) -> STATS_CLRR

Bit 31 - Set this bit to clear statistic counters.

pub fn stats_en(&self) -> STATS_ENR

Bit 30 - Set this bit to enable statistic counters.

pub fn dyn_cg_en(&self) -> DYN_CG_ENR

Bit 29 - 0: The in-built clock gate functionality is bypassed. 1: The in-built clock gate functionality is enabled, automatically gating the clock when not needed.

pub fn reserved6(&self) -> RESERVED6R

Bits 6:28 - Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.

pub fn idcode_lb_dis(&self) -> IDCODE_LB_DISR

Bit 5 - Icode/Dcode flash line buffer control 0: Enable 1: Disable

pub fn sysbus_lb_dis(&self) -> SYSBUS_LB_DISR

Bit 4 - Sysbus flash line buffer control 0: Enable 1: Disable

pub fn arb_cfg(&self) -> ARB_CFGR

Bit 3 - Icode/Dcode and sysbus arbitation scheme 0: Static arbitration (icode/docde > sysbus) 1: Round-robin arbitration

pub fn pref_en(&self) -> PREF_ENR

Bit 2 - Tag prefetch control 0: Disabled 1: Enabled

pub fn mode(&self) -> MODER

Bits 0:1 - VIMS mode request. Write accesses to this field will be blocked while STAT.MODE_CHANGING is set to 1. Note: Transaction from CACHE mode to GPRAM mode should be done through OFF mode to minimize flash block delay.