Struct cc2650::rfc_dbell::rfhwifg::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn reserved20(&self) -> RESERVED20R

Bits 20:31 - Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.

pub fn ratch7(&self) -> RATCH7R

Bit 19 - Radio timer channel 7 interrupt flag. Write zero to clear flag. Write to one has no effect.

pub fn ratch6(&self) -> RATCH6R

Bit 18 - Radio timer channel 6 interrupt flag. Write zero to clear flag. Write to one has no effect.

pub fn ratch5(&self) -> RATCH5R

Bit 17 - Radio timer channel 5 interrupt flag. Write zero to clear flag. Write to one has no effect.

pub fn ratch4(&self) -> RATCH4R

Bit 16 - Radio timer channel 4 interrupt flag. Write zero to clear flag. Write to one has no effect.

pub fn ratch3(&self) -> RATCH3R

Bit 15 - Radio timer channel 3 interrupt flag. Write zero to clear flag. Write to one has no effect.

pub fn ratch2(&self) -> RATCH2R

Bit 14 - Radio timer channel 2 interrupt flag. Write zero to clear flag. Write to one has no effect.

pub fn ratch1(&self) -> RATCH1R

Bit 13 - Radio timer channel 1 interrupt flag. Write zero to clear flag. Write to one has no effect.

pub fn ratch0(&self) -> RATCH0R

Bit 12 - Radio timer channel 0 interrupt flag. Write zero to clear flag. Write to one has no effect.

pub fn rfesoft2(&self) -> RFESOFT2R

Bit 11 - RF engine software defined interrupt 2 flag. Write zero to clear flag. Write to one has no effect.

pub fn rfesoft1(&self) -> RFESOFT1R

Bit 10 - RF engine software defined interrupt 1 flag. Write zero to clear flag. Write to one has no effect.

pub fn rfesoft0(&self) -> RFESOFT0R

Bit 9 - RF engine software defined interrupt 0 flag. Write zero to clear flag. Write to one has no effect.

pub fn rfedone(&self) -> RFEDONER

Bit 8 - RF engine command done interrupt flag. Write zero to clear flag. Write to one has no effect.

pub fn reserved7(&self) -> RESERVED7R

Bit 7 - Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.

pub fn trctk(&self) -> TRCTKR

Bit 6 - Debug tracer system tick interrupt flag. Write zero to clear flag. Write to one has no effect.

pub fn mdmsoft(&self) -> MDMSOFTR

Bit 5 - Modem synchronization word detection interrupt flag. This interrupt will be raised by modem when the synchronization word is received. The CPE may decide to reject the packet based on its header (protocol specific). Write zero to clear flag. Write to one has no effect.

pub fn mdmout(&self) -> MDMOUTR

Bit 4 - Modem FIFO output interrupt flag. Write zero to clear flag. Write to one has no effect.

pub fn mdmin(&self) -> MDMINR

Bit 3 - Modem FIFO input interrupt flag. Write zero to clear flag. Write to one has no effect.

pub fn mdmdone(&self) -> MDMDONER

Bit 2 - Modem command done interrupt flag. Write zero to clear flag. Write to one has no effect.

pub fn fsca(&self) -> FSCAR

Bit 1 - Frequency synthesizer calibration accelerator interrupt flag. Write zero to clear flag. Write to one has no effect.

pub fn reserved0(&self) -> RESERVED0R

Bit 0 - Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.