[−][src]Enum cc2650::aon_event::mcuwusel::WU0_EVR
Possible values of the field WU0_EV
Variants
NONE
No event, always low
AUX_COMPB_ASYNC_N
Comparator B not triggered. Asynchronous signal directly from AUX Comparator B (inverted) as opposed to AUX_COMPB which is synchronized in AUX
AUX_COMPB_ASYNC
Comparator B triggered. Asynchronous signal directly from the AUX Comparator B as opposed to AUX_COMPB which is synchronized in AUX
BATMON_VOLT
BATMON voltage update event
BATMON_TEMP
BATMON temperature update event
AUX_TIMER1_EV
AUX Timer 1 Event
AUX_TIMER0_EV
AUX Timer 0 Event
AUX_TDC_DONE
TDC completed or timed out
AUX_ADC_DONE
ADC conversion completed
AUX_COMPB
Comparator B triggered
AUX_COMPA
Comparator A triggered
AUX_SWEV2
AUX Software triggered event #2. Triggered by AUX_EVCTL:SWEVSET.SWEV2
AUX_SWEV1
AUX Software triggered event #1. Triggered by AUX_EVCTL:SWEVSET.SWEV1
AUX_SWEV0
AUX Software triggered event #0. Triggered by AUX_EVCTL:SWEVSET.SWEV0
JTAG
JTAG generated event
RTC_UPD
RTC Update Tick (16 kHz signal, i.e. event line toggles value every 32 kHz clock period)
RTC_COMB_DLY
RTC combined delayed event
RTC_CH2_DLY
RTC channel 2 - delayed event
RTC_CH1_DLY
RTC channel 1 - delayed event
RTC_CH0_DLY
RTC channel 0 - delayed event
RTC_CH2
RTC channel 2 event
RTC_CH1
RTC channel 1 event
RTC_CH0
RTC channel 0 event
PAD
Edge detect on any PAD
PAD31
Edge detect on PAD31
PAD30
Edge detect on PAD30
PAD29
Edge detect on PAD29
PAD28
Edge detect on PAD28
PAD27
Edge detect on PAD27
PAD26
Edge detect on PAD26
PAD25
Edge detect on PAD25
PAD24
Edge detect on PAD24
PAD23
Edge detect on PAD23
PAD22
Edge detect on PAD22
PAD21
Edge detect on PAD21
PAD20
Edge detect on PAD20
PAD19
Edge detect on PAD19
PAD18
Edge detect on PAD18
PAD17
Edge detect on PAD17
PAD16
Edge detect on PAD16
PAD15
Edge detect on PAD15
PAD14
Edge detect on PAD14
PAD13
Edge detect on PAD13
PAD12
Edge detect on PAD12
PAD11
Edge detect on PAD11
PAD10
Edge detect on PAD10
PAD9
Edge detect on PAD9
PAD8
Edge detect on PAD8
PAD7
Edge detect on PAD7
PAD6
Edge detect on PAD6
PAD5
Edge detect on PAD5
PAD4
Edge detect on PAD4
PAD3
Edge detect on PAD3
PAD2
Edge detect on PAD2
PAD1
Edge detect on PAD1
PAD0
Edge detect on PAD0
_Reserved(u8)
Reserved
Methods
impl WU0_EVR
[src]
pub fn bits(&self) -> u8
[src]
Value of the field as raw bits
pub fn is_none(&self) -> bool
[src]
Checks if the value of the field is NONE
pub fn is_aux_compb_async_n(&self) -> bool
[src]
Checks if the value of the field is AUX_COMPB_ASYNC_N
pub fn is_aux_compb_async(&self) -> bool
[src]
Checks if the value of the field is AUX_COMPB_ASYNC
pub fn is_batmon_volt(&self) -> bool
[src]
Checks if the value of the field is BATMON_VOLT
pub fn is_batmon_temp(&self) -> bool
[src]
Checks if the value of the field is BATMON_TEMP
pub fn is_aux_timer1_ev(&self) -> bool
[src]
Checks if the value of the field is AUX_TIMER1_EV
pub fn is_aux_timer0_ev(&self) -> bool
[src]
Checks if the value of the field is AUX_TIMER0_EV
pub fn is_aux_tdc_done(&self) -> bool
[src]
Checks if the value of the field is AUX_TDC_DONE
pub fn is_aux_adc_done(&self) -> bool
[src]
Checks if the value of the field is AUX_ADC_DONE
pub fn is_aux_compb(&self) -> bool
[src]
Checks if the value of the field is AUX_COMPB
pub fn is_aux_compa(&self) -> bool
[src]
Checks if the value of the field is AUX_COMPA
pub fn is_aux_swev2(&self) -> bool
[src]
Checks if the value of the field is AUX_SWEV2
pub fn is_aux_swev1(&self) -> bool
[src]
Checks if the value of the field is AUX_SWEV1
pub fn is_aux_swev0(&self) -> bool
[src]
Checks if the value of the field is AUX_SWEV0
pub fn is_jtag(&self) -> bool
[src]
Checks if the value of the field is JTAG
pub fn is_rtc_upd(&self) -> bool
[src]
Checks if the value of the field is RTC_UPD
pub fn is_rtc_comb_dly(&self) -> bool
[src]
Checks if the value of the field is RTC_COMB_DLY
pub fn is_rtc_ch2_dly(&self) -> bool
[src]
Checks if the value of the field is RTC_CH2_DLY
pub fn is_rtc_ch1_dly(&self) -> bool
[src]
Checks if the value of the field is RTC_CH1_DLY
pub fn is_rtc_ch0_dly(&self) -> bool
[src]
Checks if the value of the field is RTC_CH0_DLY
pub fn is_rtc_ch2(&self) -> bool
[src]
Checks if the value of the field is RTC_CH2
pub fn is_rtc_ch1(&self) -> bool
[src]
Checks if the value of the field is RTC_CH1
pub fn is_rtc_ch0(&self) -> bool
[src]
Checks if the value of the field is RTC_CH0
pub fn is_pad(&self) -> bool
[src]
Checks if the value of the field is PAD
pub fn is_pad31(&self) -> bool
[src]
Checks if the value of the field is PAD31
pub fn is_pad30(&self) -> bool
[src]
Checks if the value of the field is PAD30
pub fn is_pad29(&self) -> bool
[src]
Checks if the value of the field is PAD29
pub fn is_pad28(&self) -> bool
[src]
Checks if the value of the field is PAD28
pub fn is_pad27(&self) -> bool
[src]
Checks if the value of the field is PAD27
pub fn is_pad26(&self) -> bool
[src]
Checks if the value of the field is PAD26
pub fn is_pad25(&self) -> bool
[src]
Checks if the value of the field is PAD25
pub fn is_pad24(&self) -> bool
[src]
Checks if the value of the field is PAD24
pub fn is_pad23(&self) -> bool
[src]
Checks if the value of the field is PAD23
pub fn is_pad22(&self) -> bool
[src]
Checks if the value of the field is PAD22
pub fn is_pad21(&self) -> bool
[src]
Checks if the value of the field is PAD21
pub fn is_pad20(&self) -> bool
[src]
Checks if the value of the field is PAD20
pub fn is_pad19(&self) -> bool
[src]
Checks if the value of the field is PAD19
pub fn is_pad18(&self) -> bool
[src]
Checks if the value of the field is PAD18
pub fn is_pad17(&self) -> bool
[src]
Checks if the value of the field is PAD17
pub fn is_pad16(&self) -> bool
[src]
Checks if the value of the field is PAD16
pub fn is_pad15(&self) -> bool
[src]
Checks if the value of the field is PAD15
pub fn is_pad14(&self) -> bool
[src]
Checks if the value of the field is PAD14
pub fn is_pad13(&self) -> bool
[src]
Checks if the value of the field is PAD13
pub fn is_pad12(&self) -> bool
[src]
Checks if the value of the field is PAD12
pub fn is_pad11(&self) -> bool
[src]
Checks if the value of the field is PAD11
pub fn is_pad10(&self) -> bool
[src]
Checks if the value of the field is PAD10
pub fn is_pad9(&self) -> bool
[src]
Checks if the value of the field is PAD9
pub fn is_pad8(&self) -> bool
[src]
Checks if the value of the field is PAD8
pub fn is_pad7(&self) -> bool
[src]
Checks if the value of the field is PAD7
pub fn is_pad6(&self) -> bool
[src]
Checks if the value of the field is PAD6
pub fn is_pad5(&self) -> bool
[src]
Checks if the value of the field is PAD5
pub fn is_pad4(&self) -> bool
[src]
Checks if the value of the field is PAD4
pub fn is_pad3(&self) -> bool
[src]
Checks if the value of the field is PAD3
pub fn is_pad2(&self) -> bool
[src]
Checks if the value of the field is PAD2
pub fn is_pad1(&self) -> bool
[src]
Checks if the value of the field is PAD1
pub fn is_pad0(&self) -> bool
[src]
Checks if the value of the field is PAD0
Trait Implementations
impl Clone for WU0_EVR
[src]
fn clone(&self) -> WU0_EVR
[src]
fn clone_from(&mut self, source: &Self)
1.0.0[src]
Performs copy-assignment from source
. Read more
impl Copy for WU0_EVR
[src]
impl Debug for WU0_EVR
[src]
impl PartialEq<WU0_EVR> for WU0_EVR
[src]
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,