[−][src]Struct cc13x2_cc26x2_hal::fcfg1::user_id::R
Value read from the register
Methods
impl R
[src]
pub fn bits(&self) -> u32
[src]
Value of the register as raw bits
pub fn pg_rev(&self) -> PG_REVR
[src]
Bits 28:31 - 31:28] Field used to distinguish revisions of the device.
pub fn ver(&self) -> VERR
[src]
Bits 26:27 - 27:26] Version number. 0x0: Bits [25:12] of this register has the stated meaning. Any other setting indicate a different encoding of these bits.
pub fn pa(&self) -> PAR
[src]
Bit 25 - 25:25] 0: Does not support 20dBm PA 1: Supports 20dBM PA
pub fn reserved24(&self) -> RESERVED24R
[src]
Bit 24 - 24:24] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.
pub fn cc13(&self) -> CC13R
[src]
Bit 23 - 23:23] 0: CC26xx device type 1: CC13xx device type
pub fn sequence(&self) -> SEQUENCER
[src]
Bits 19:22 - 22:19] Sequence. Used to differentiate between marketing/orderable product where other fields of this register are the same (temp range, flash size, voltage range etc)
pub fn pkg(&self) -> PKGR
[src]
Bits 16:18 - 18:16] Package type. 0x0: 4x4mm QFN (RHB) package 0x1: 5x5mm QFN (RSM) package 0x2: 7x7mm QFN (RGZ) package 0x3: Wafer sale package (naked die) 0x4: WCSP (YFV) 0x5: 7x7mm QFN package with Wettable Flanks Other values are reserved for future use. Packages available for a specific device are shown in the device datasheet.
pub fn protocol(&self) -> PROTOCOLR
[src]
Bits 12:15 - 15:12] Protocols supported. 0x1: BLE 0x2: RF4CE 0x4: Zigbee/6lowpan 0x8: Proprietary More than one protocol can be supported on same device - values above are then combined.
pub fn reserved0(&self) -> RESERVED0R
[src]
Bits 0:11 - 11:0] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T> From for T
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self