[−][src]Module cc13x2_cc26x2_hal::aux_timer2::evctl
Event Control Set and clear individual events manually. Manual update of an event takes priority over automatic channel updates to the same event. You cannot set and clear an event at the same time, such requests will be neglected. An event can be automatically cleared, set, toggled, or pulsed by each channel, listed in decreasing order of priority. The action with highest priority happens when multiple channels want to update an event at the same time. The four events connect to the asynchronous AUX event bus: - Event 0 connects to AUX_EVCTL:EVSTAT3.AUX_TIMER2_EV0. - Event 1 connects to AUX_EVCTL:EVSTAT3.AUX_TIMER2_EV1. - Event 2 connects to AUX_EVCTL:EVSTAT3.AUX_TIMER2_EV2. - Event 3 connects to AUX_EVCTL:EVSTAT3.AUX_TIMER2_EV3.
Structs
EV0_SETR | Value of the field |
EV0_CLRR | Value of the field |
EV1_SETR | Value of the field |
EV1_CLRR | Value of the field |
EV2_SETR | Value of the field |
EV2_CLRR | Value of the field |
EV3_SETR | Value of the field |
EV3_CLRR | Value of the field |
R | Value read from the register |
RESERVED8R | Value of the field |
W | Value to write to the register |
_EV0_SETW | Proxy |
_EV0_CLRW | Proxy |
_EV1_SETW | Proxy |
_EV1_CLRW | Proxy |
_EV2_SETW | Proxy |
_EV2_CLRW | Proxy |
_EV3_SETW | Proxy |
_EV3_CLRW | Proxy |
_RESERVED8W | Proxy |