Struct cap_std::os::unix::net::UnixStream

pub struct UnixStream { /* fields omitted */ }

A Unix stream socket.

This corresponds to std::os::unix::net::UnixStream.

Note that this UnixStream has no connect method. To create a UnixStream, you must first obtain a Dir containing the path, and then call Dir::connect_unix_stream.

Implementations

impl UnixStream

pub unsafe fn from_std(std: UnixStream) -> Self

Constructs a new instance of Self from the given std::os::unix::net::UnixStream.

Safety

std::os::unix::net::UnixStream is not sandboxed and may access any address that the host process has access to.

pub fn pair() -> Result<(Self, Self)>

Creates an unnamed pair of connected sockets.

This corresponds to std::os::unix::net::UnixStream::pair.

TODO: should this require a capability?

pub fn try_clone(&self) -> Result<Self>

Creates a new independently owned handle to the underlying socket.

This corresponds to std::os::unix::net::UnixStream::try_clone.

pub fn local_addr(&self) -> Result<SocketAddr>

Returns the socket address of the local half of this connection.

This corresponds to std::os::unix::net::UnixStream::local_addr.

pub fn peer_addr(&self) -> Result<SocketAddr>

Returns the socket address of the remote half of this connection.

This corresponds to std::os::unix::net::UnixStream::peer_addr.

pub fn set_read_timeout(&self, timeout: Option<Duration>) -> Result<()>

Sets the read timeout for the socket.

This corresponds to std::os::unix::net::UnixStream::set_read_timeout.

pub fn set_write_timeout(&self, timeout: Option<Duration>) -> Result<()>

Sets the write timeout for the socket.

This corresponds to std::os::unix::net::UnixStream::set_write_timeout.

pub fn read_timeout(&self) -> Result<Option<Duration>>

Returns the read timeout of this socket.

This corresponds to std::os::unix::net::UnixStream::read_timeout.

pub fn write_timeout(&self) -> Result<Option<Duration>>

Returns the write timeout of this socket.

This corresponds to std::os::unix::net::UnixStream::write_timeout.

pub fn set_nonblocking(&self, nonblocking: bool) -> Result<()>

Moves the socket into or out of nonblocking mode.

This corresponds to std::os::unix::net::UnixStream::set_nonblocking.

pub fn take_error(&self) -> Result<Option<Error>>

Returns the value of the SO_ERROR option.

This corresponds to std::os::unix::net::UnixStream::take_error.

pub fn shutdown(&self, how: Shutdown) -> Result<()>

Shuts down the read, write, or both halves of this connection.

This corresponds to std::os::unix::net::UnixStream::shutdown.

Trait Implementations

impl AsRawFd for UnixStream

fn as_raw_fd(&self) -> RawFd

Extracts the raw file descriptor.

impl FromRawFd for UnixStream

unsafe fn from_raw_fd(fd: RawFd) -> Self

Constructs a new instance of Self from the given raw file descriptor.

impl IntoRawFd for UnixStream

fn into_raw_fd(self) -> RawFd

Consumes this object, returning the raw underlying file descriptor.

impl Read for UnixStream

fn read(&mut self, buf: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize>

Like read, except that it reads into a slice of buffers.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<()>

Read the exact number of bytes required to fill buf.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize>

Read all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize>

Read all bytes until EOF in this source, appending them to buf.

fn is_read_vectored(&self) -> bool

🔬 This is a nightly-only experimental API. (can_vector)

Determines if this Reader has an efficient read_vectored implementation.

unsafe fn initializer(&self) -> Initializer

🔬 This is a nightly-only experimental API. (read_initializer)

Determines if this Reader can work with buffers of uninitialized memory.

fn by_ref(&mut self) -> &mut Self

Creates a “by reference” adaptor for this instance of Read.

fn bytes(self) -> Bytes<Self>

Transforms this Read instance to an Iterator over its bytes.

fn chain<R>(self, next: R) -> Chain<Self, R> where
    R: Read, 

Creates an adaptor which will chain this stream with another.

fn take(self, limit: u64) -> Take<Self>

Creates an adaptor which will read at most limit bytes from it.

impl Read for &UnixStream

fn read(&mut self, buf: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize>

Like read, except that it reads into a slice of buffers.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<()>

Read the exact number of bytes required to fill buf.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize>

Read all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize>

Read all bytes until EOF in this source, appending them to buf.

fn is_read_vectored(&self) -> bool

🔬 This is a nightly-only experimental API. (can_vector)

Determines if this Reader has an efficient read_vectored implementation.

unsafe fn initializer(&self) -> Initializer

🔬 This is a nightly-only experimental API. (read_initializer)

Determines if this Reader can work with buffers of uninitialized memory.

fn by_ref(&mut self) -> &mut Self

Creates a “by reference” adaptor for this instance of Read.

fn bytes(self) -> Bytes<Self>

Transforms this Read instance to an Iterator over its bytes.

fn chain<R>(self, next: R) -> Chain<Self, R> where
    R: Read, 

Creates an adaptor which will chain this stream with another.

fn take(self, limit: u64) -> Take<Self>

Creates an adaptor which will read at most limit bytes from it.

impl Write for UnixStream

fn write(&mut self, buf: &[u8]) -> Result<usize>

Write a buffer into this writer, returning how many bytes were written.

fn flush(&mut self) -> Result<()>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination.

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize>

Like write, except that it writes from a slice of buffers.

fn write_all(&mut self, buf: &[u8]) -> Result<()>

Attempts to write an entire buffer into this writer.

fn is_write_vectored(&self) -> bool

🔬 This is a nightly-only experimental API. (can_vector)

Determines if this Writer has an efficient write_vectored implementation.

fn write_all_vectored(&mut self, bufs: &mut [IoSlice<'_>]) -> Result<()>

🔬 This is a nightly-only experimental API. (write_all_vectored)

Attempts to write multiple buffers into this writer.

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<(), Error>

Writes a formatted string into this writer, returning any error encountered.

fn by_ref(&mut self) -> &mut Self

Creates a “by reference” adaptor for this instance of Write.

impl Write for &UnixStream

fn write(&mut self, buf: &[u8]) -> Result<usize>

Write a buffer into this writer, returning how many bytes were written.

fn flush(&mut self) -> Result<()>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination.

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize>

Like write, except that it writes from a slice of buffers.

fn write_all(&mut self, buf: &[u8]) -> Result<()>

Attempts to write an entire buffer into this writer.

fn is_write_vectored(&self) -> bool

🔬 This is a nightly-only experimental API. (can_vector)

Determines if this Writer has an efficient write_vectored implementation.

fn write_all_vectored(&mut self, bufs: &mut [IoSlice<'_>]) -> Result<()>

🔬 This is a nightly-only experimental API. (write_all_vectored)

Attempts to write multiple buffers into this writer.

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<(), Error>

Writes a formatted string into this writer, returning any error encountered.

fn by_ref(&mut self) -> &mut Self

Creates a “by reference” adaptor for this instance of Write.

impl OwnsRaw for UnixStream