Struct calamp_rs::messages::event_report::EventReport [−][src]
pub struct EventReport {}Show fields
pub update_time: u32, pub time_of_fix: u32, pub latitude: f32, pub longitude: f32, pub altitude: f32, pub speed: f32, pub heading: u16, pub satellites: u8, pub fix_status: FixStatus, pub carrier: u16, pub rssi: i16, pub comm_state: CommState, pub hdop: u8, pub inputs: Inputs, pub unit_status: UnitStatus, pub event_index: u8, pub event_code: u8, pub accums: u8, pub append: u8, pub accum_list: Vec<u32>,
Expand description
Event Report messages
Initiated by the LMU and are generated by the LMU’s Programmable Event Generator (PEG). They can be either Acknowledged or Unacknowledged Requests. The Server should respond to an Acknowledged Event Report Request with an Acknowledge Message.
Fields
update_time: u32
time_of_fix: u32
latitude: f32
The latitude reading of the GPS receiver, measured in degrees with a 1x10^-7 degree lsb, signed 2’s complement.
longitude: f32
The longitude reading of the GPS receiver, measured in degrees with a 1x10^-7 degree lsb, signed 2’s complement.
altitude: f32
The altitude reading of the GPS receiver measured in centimeters above the WGS-84 Datum, signed 2’s complement.
speed: f32
The speed as reported by the GPS receiver, measured in centimeters per second.
heading: u16
The heading value reported in degrees from true North.
satellites: u8
The number of satellites used in the GPS solution.
fix_status: FixStatus
The current fix status of the GPS receiver bitmapped as follows
carrier: u16
The identifier of the Carrier/Operator the wireless modem is currently using. For GSM, HSPA, and LTE networks, this is the MNC (mobile network code). For CDMA networks this is the SID (system identification number).
rssi: i16
The received signal strength of the wireless modem in dBm. This value is signed in a 2’s complement format.
comm_state: CommState
The current state of the wireless modem bit mapped as follows
Bit 0 – Available
Bit 1 – Network Service
Bit 2 – Data Service
Bit 3 – Connected (PPP Session Up)
Bit 4 – Voice Call is Active
Bit 5 – Roaming
Bits 6-7 – Network Technology
00 = 2G Network (CDMA or GSM)
01 = 3G Network (UMTS)
10 = 4G Network (LTE)
11 = Reserved
hdop: u8
The GPS Horizontal Dilution of Precision - it is a unit-less value reported with a 0.1 lsb.
inputs: Inputs
The current state of the inputs, bit mapped as follows:
Bit 0 – Ignition
Bit 1 – Input 1
Bit 2 – Input 2
Bit 3 – Input 3
Bit 4 – Input 4
Bit 5 – Input 5
Bit 6 – Input 6
Bit 7 – Input 7
unit_status: UnitStatus
Status of key modules within the unit:
Bit 0 – LMU32: HTTP OTA Update Status (0=OK, 1=Error), LMU8: Unused
Bit 1 – GPS Antenna Status (0=OK, 1=Error)
Bit 2 – GPS Receiver Self-Test (0=OK, 1=Error) (LMU32 only)
Bit 3 – GPS Receiver Tracking (0=Yes, 1=No)
Bit 4 – Reserved, Currently Unused
Bit 5 – Reserved, Currently Unused
Bit 6 – Reserved, Currently Unused
Bit 7 – Unused
event_index: u8
The index number of the event that generated the report; values should range from 0-249. 255 represents a Real Time PEG Action request.
event_code: u8
The event code assigned to the report as specified by the event’s Action Parameter
accums: u8
The number of 4-byte values in the AccumList and the Accumulator Reporting Format Type (upper 2 bits).
append: u8
This bit-mapped byte is used to indicate the presence, when corresponding bit is set, of specific data types appended to the end of the Event Report following the list of accumulators. Each data type starts with a single length byte followed by the data. If multiple data types are present, they shall appear in order of the bits set in the ‘Append’ byte, starting with bit 0.
Bit 0 – Cell Info (see ‘Appended Data’ section below).
Bit 1 thru 7 – reserved, set to zero (0).
accum_list: Vec<u32>
A list of ‘n’ 4-byte fields where ‘n’ is defined in the Accums field. The format for this list is dependent upon the Accumulator Reporting Format Type also defined in the Accums field. Refer to Appendix G, ‘Accumulator Reporting Formats’ for details.
Implementations
Trait Implementations
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
This method tests for !=
.
Auto Trait Implementations
impl RefUnwindSafe for EventReport
impl Send for EventReport
impl Sync for EventReport
impl Unpin for EventReport
impl UnwindSafe for EventReport
Blanket Implementations
Mutably borrows from an owned value. Read more
fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,
Causes self
to use its Binary
implementation when Debug
-formatted.
fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,
Causes self
to use its Display
implementation when
Debug
-formatted. Read more
fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,
Causes self
to use its LowerExp
implementation when
Debug
-formatted. Read more
fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,
Causes self
to use its LowerHex
implementation when
Debug
-formatted. Read more
Causes self
to use its Octal
implementation when Debug
-formatted.
fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,
Causes self
to use its Pointer
implementation when
Debug
-formatted. Read more
fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,
Causes self
to use its UpperExp
implementation when
Debug
-formatted. Read more
fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,
Causes self
to use its UpperHex
implementation when
Debug
-formatted. Read more
impl<T> Pipe for T where
T: ?Sized,
impl<T> Pipe for T where
T: ?Sized,
Pipes by value. This is generally the method you want to use. Read more
Borrows self
and passes that borrow into the pipe function. Read more
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,
Mutably borrows self
and passes that borrow into the pipe function. Read more
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
R: 'a,
B: 'a + ?Sized,
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
R: 'a,
B: 'a + ?Sized,
Borrows self
, then passes self.borrow()
into the pipe function. Read more
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
R: 'a,
B: 'a + ?Sized,
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
R: 'a,
B: 'a + ?Sized,
Mutably borrows self
, then passes self.borrow_mut()
into the pipe
function. Read more
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
R: 'a,
U: 'a + ?Sized,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
R: 'a,
U: 'a + ?Sized,
Borrows self
, then passes self.as_ref()
into the pipe function.
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
Self: AsMut<U>,
R: 'a,
U: 'a + ?Sized,
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
Self: AsMut<U>,
R: 'a,
U: 'a + ?Sized,
Mutably borrows self
, then passes self.as_mut()
into the pipe
function. Read more
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.deref()
into the pipe function.
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_as_mut<'a, T, R>(&'a mut self, func: impl FnOnce(&'a mut T) -> R) -> R where
Self: AsMut<T>,
T: 'a,
R: 'a,
fn pipe_as_mut<'a, T, R>(&'a mut self, func: impl FnOnce(&'a mut T) -> R) -> R where
Self: AsMut<T>,
T: 'a,
R: 'a,
Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_borrow_mut<'a, T, R>(
&'a mut self,
func: impl FnOnce(&'a mut T) -> R
) -> R where
Self: BorrowMut<T>,
T: 'a,
R: 'a,
fn pipe_borrow_mut<'a, T, R>(
&'a mut self,
func: impl FnOnce(&'a mut T) -> R
) -> R where
Self: BorrowMut<T>,
T: 'a,
R: 'a,
Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
Pipes a dereference into a function that cannot normally be called in suffix position. Read more
fn pipe_deref_mut<'a, R>(
&'a mut self,
func: impl FnOnce(&'a mut Self::Target) -> R
) -> R where
Self: DerefMut,
R: 'a,
fn pipe_deref_mut<'a, R>(
&'a mut self,
func: impl FnOnce(&'a mut Self::Target) -> R
) -> R where
Self: DerefMut,
R: 'a,
Pipes a mutable dereference into a function that cannot normally be called in suffix position. Read more
Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Immutable access to the Borrow<B>
of a value. Read more
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Mutable access to the BorrowMut<B>
of a value. Read more
Immutable access to the AsRef<R>
view of a value. Read more
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Mutable access to the AsMut<R>
view of a value. Read more
Immutable access to the Deref::Target
of a value. Read more
Mutable access to the Deref::Target
of a value. Read more
Calls .tap()
only in debug builds, and is erased in release builds.
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls .tap_mut()
only in debug builds, and is erased in release
builds. Read more
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Calls .tap_borrow()
only in debug builds, and is erased in release
builds. Read more
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Calls .tap_borrow_mut()
only in debug builds, and is erased in release
builds. Read more
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
Calls .tap_ref()
only in debug builds, and is erased in release
builds. Read more
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Calls .tap_ref_mut()
only in debug builds, and is erased in release
builds. Read more
Provides immutable access for inspection. Read more
Calls tap
in debug builds, and does nothing in release builds.
Provides mutable access for modification. Read more
fn tap_mut_dbg<F, R>(self, func: F) -> Self where
F: FnOnce(&mut Self) -> R,
fn tap_mut_dbg<F, R>(self, func: F) -> Self where
F: FnOnce(&mut Self) -> R,
Calls tap_mut
in debug builds, and does nothing in release builds.
impl<T, U> TapAsRef<U> for T where
U: ?Sized,
impl<T, U> TapAsRef<U> for T where
U: ?Sized,
Provides immutable access to the reference for inspection.
fn tap_ref_dbg<F, R>(self, func: F) -> Self where
Self: AsRef<T>,
F: FnOnce(&T) -> R,
fn tap_ref_dbg<F, R>(self, func: F) -> Self where
Self: AsRef<T>,
F: FnOnce(&T) -> R,
Calls tap_ref
in debug builds, and does nothing in release builds.
fn tap_ref_mut<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_ref_mut<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
Provides mutable access to the reference for modification.
fn tap_ref_mut_dbg<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_ref_mut_dbg<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
Calls tap_ref_mut
in debug builds, and does nothing in release builds.
impl<T, U> TapBorrow<U> for T where
U: ?Sized,
impl<T, U> TapBorrow<U> for T where
U: ?Sized,
fn tap_borrow<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,
fn tap_borrow<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,
Provides immutable access to the borrow for inspection. Read more
fn tap_borrow_dbg<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,
fn tap_borrow_dbg<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,
Calls tap_borrow
in debug builds, and does nothing in release builds.
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
Provides mutable access to the borrow for modification.
fn tap_borrow_mut_dbg<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_borrow_mut_dbg<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
Calls tap_borrow_mut
in debug builds, and does nothing in release
builds. Read more
Immutably dereferences self
for inspection.
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
Calls tap_deref
in debug builds, and does nothing in release builds.
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
Mutably dereferences self
for modification.
fn tap_deref_mut_dbg<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
fn tap_deref_mut_dbg<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
Calls tap_deref_mut
in debug builds, and does nothing in release
builds. Read more