bme280
A rust device driver for the Bosch BME280 temperature, humidity, and atmospheric pressure sensor and the Bosch BMP280 temperature and atmospheric pressure sensor.
Usage
use linux_embedded_hal as hal;
use ;
use BME280;
// using Linux I2C Bus #1 in this example
let i2c_bus = new.unwrap;
let mut delay = /* ..delay provider */
// initialize the BME280 using the primary I2C address 0x76
let mut bme280 = BME280 new_primary;
// or, initialize the BME280 using the secondary I2C address 0x77
// let mut bme280 = BME280::new_secondary(i2c_bus);
// or, initialize the BME280 using a custom I2C address
// let bme280_i2c_addr = 0x88;
// let mut bme280 = BME280::new(i2c_bus, bme280_i2c_addr);
// initialize the sensor
bme280.init.unwrap;
// measure temperature, pressure, and humidity
let measurements = bme280.measure.unwrap;
println!;
println!;
println!;
Serde Support
To enable optional serde serialization support for the measurements struct, simply enable the serde
feature, like so in Cargo.toml
:
[]
= { = "0.2", = ["serde"] }
License
Licensed under either of:
- Apache License, Version 2.0, (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
Contribution
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.