Struct bitvec::boxed::BitBox

#[repr(C)]
pub struct BitBox<C = Local, T = Word> where
    C: Cursor,
    T: BitStore,  { /* fields omitted */ }

A pointer type for owned bit sequences.

This type is essentially a &BitSlice that owns its own memory. It can change the contents of its domain, but it cannot change its own domain like BitVec can. It is useful for fixed-size collections without lifetime tracking.

Type Parameters

• C: Cursor: An implementor of the Cursor trait. This type is used to convert semantic indices into concrete bit positions in elements, and store or retrieve bit values from the storage type.
• T: BitStore: An implementor of the BitStore trait: u8, u16, u32, or u64 (64-bit systems only). This is the actual type in memory that the box will use to store data.

Safety

The BitBox handle has the same size as standard Rust Box<[T]> handles, but it is extremely binary incompatible with them. Attempting to treat BitBox<_, T> as Box<[T]> in any manner except through the provided APIs is catastrophically unsafe and unsound.

Trait Implementations

BitBox<C, T> implements all the traits that BitSlice<C, T> does, by deferring to the BitSlice implementation. It also implements conversion traits to and from BitSlice, and to/from BitVec.

Methods

impl<C, T> BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

pub fn new(bits: &BitSlice<C, T>) -> Self

Allocates memory on the heap and then places bits into it.

Examples

let boxed = BitBox::new(0u8.bits::<LittleEndian>());

pub fn pin(bits: &BitSlice<C, T>) -> Pin<Self> where
    C: Unpin,
    T: Unpin, 

Constructs a new Pin<BitBox<C, T>>.

BitSlice is always Unpin, so this has no actual immobility effect.

pub unsafe fn from_raw(raw: BitPtr<T>) -> Self

Constructs a bit box from a raw bit pointer.

After calling this function, the raw pointer is owned by the resulting BitBox. Specifically, the BitBox destructor will free the allocated memory. For this to be safe, the memory must have been allocated by BitBox earlier in the program.

Safety

This function is unsafe because improper use may lead to memory problems. For example, a double-free may occurr if the function is called twice on the same raw pointer.

Examples

Recreate a BitBox which was previously converted to a raw pointer using BitBox::into_raw:

let b = BitBox::new(0u8.bits::<LittleEndian>());
let ptr = BitBox::into_raw(b);
let b = unsafe { BitBox::<BigEndian, _>::from_raw(ptr) };

pub fn into_raw(b: Self) -> BitPtr<T>

Consumes the BitBox, returning a wrapped raw pointer.

The pointer will be properly aligned and non-null.

After calling this function, the caller is responsible for the memory previously managed by the BitBox. In particular, the caller should properly release the memory, by converting the pointer back into a BitBox with the BitBox::from_raw function, allowing the BitBox destructor to perform the cleanup.

Note: this is an associated function, which means that you have to call it as BitBox::into_raw(b) instead of b.into_raw(). This is to match layout with the standard library’s Box API; there will never be a name conflict with BitSlice.

Examples

Converting the raw pointer back into a BitBox with BitBox::from_raw for automatic cleanup:

let b = BitBox::new(0u64.bits::<Local>());
let ptr = BitBox::into_raw(b);
let b = unsafe { BitBox::<BigEndian, _>::from_raw(ptr) };

pub fn leak<'a>(self) -> &'a mut BitSlice<C, T>

Consumes and leaks the BitBox, returning a mutable reference, &'a mut BitSlice<C, T>. Note that the memory region [T] must outlive the chosen lifetime 'a.

This function is mainly useful for bit regions that live for the remainder of the program’s life. Dropping the returned reference will cause a memory leak. If this is not acceptable, the reference should first be wrapped with the Box::from_raw function, producing a BitBox. This BitBox can then be dropped which will properly deallocate the memory.

Note: this is an associated function, which means that you have to call it as BitBox::leak(b) instead of b.leak(). This is to match layout with the standard library’s Box API; there will never be a name conflict with BitSlice.

Examples

Simple usage:

let b = BitBox::new(0u64.bits::<Local>());
let static_ref: &'static mut BitSlice<Local, u64> = BitBox::leak(b);
static_ref.set(0, true);
assert_eq!(static_ref.count_ones(), 1);

impl<C, T> BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

pub fn empty() -> Self

Constructs an empty boxed bitslice.

Returns

An empty BitBox at an arbitrary location.

Examples

use bitvec::prelude::*;

let bb: BitBox = BitBox::empty();
assert!(bb.is_empty());

pub fn from_element(elt: T) -> Self

Produces a BitBox from a single element.

Parameters

• elt: The source element from which to make the BitBox.

Returns

A BitBox containing the provided element.

Examples

use bitvec::prelude::*;

let bb: BitBox<BigEndian, u16> = BitBox::from_element(!0);
assert!(bb.all());

pub fn from_slice(slice: &[T]) -> Self

Builds a BitBox from a borrowed slice of elements.

Parameters

• slice: The source slice from which to make the BitBox.

Returns

A BitBox containing the (cloned) provided slice.

Panics

This function may panic if the provided slice is longer than the BitBox can support.

Examples

use bitvec::prelude::*;

let src = [5, 10];
let bb: BitBox<BigEndian, u8> = BitBox::from_slice(&src[..]);
assert!(bb[5]);
assert!(bb[7]);
assert!(bb[12]);
assert!(bb[14]);

pub fn from_bitslice(slice: &BitSlice<C, T>) -> Self

Clones a &BitSlice into a BitBox.

Parameters

• slice: The bit slice to clone into a bit box.

Returns

A BitBox containing the same bits as the source slice.

Examples

use bitvec::prelude::*;

let src = [0u8, !0];
let bb = BitBox::<BigEndian, _>::from_bitslice(src.bits());
assert_eq!(bb.len(), 16);
assert!(bb.some());

pub fn from_boxed_slice(boxed: Box<[T]>) -> Self

Produces a BitBox from an owned slice of elements.

Parameters

• slice: The source boxed slice from which to make the BitBox.

Returns

A BitBox governing the same slice that was passed in. This function does not reallocate.

Panics

This function may panic if the provided slice is longer than the BitBox can support.

Examples

use bitvec::prelude::*;

let slice: Box<[u16]> = vec![0, !0].into_boxed_slice();
let bb = BitBox::<LittleEndian, _>::from_boxed_slice(slice);
assert!(bb.some());
assert_eq!(bb.len(), 32);

pub fn into_boxed_slice(self) -> Box<[T]>

Removes the BitBox wrapper from a Box<[T]>.

Parameters

• self

Returns

The Box<[T]> underneath self.

Examples

use bitvec::prelude::*;

let slice: Box<[u16]> = vec![0, !0].into_boxed_slice();
let bb = BitBox::<LittleEndian, _>::from_boxed_slice(slice);
assert_eq!(bb.len(), 32);
let slice = bb.into_boxed_slice();
assert_eq!(slice.len(), 2);

pub fn add_reverse<I>(self, addend: I) -> Self where
    I: IntoIterator<Item = bool>, 

Performs “reverse” addition (left to right instead of right to left).

This delegates to BitSlice::add_assign_reverse.

Parameters

• self
• addend: impl IntoIterator<Item=bool>: A bitstream to add to self.

Returns

The sum of self and addend.

pub fn change_cursor<D>(self) -> BitBox<D, T> where
    D: Cursor, 

Changes the cursor on a box handle, without changing the data it governs.

Parameters

• self

Returns

An equivalent handle to the same data, with a new cursor parameter.

pub fn as_bitslice(&self) -> &BitSlice<C, T>

Accesses the BitSlice<C, T> to which the BitBox refers.

Parameters

• &self

Returns

The slice of bits behind the box.

pub fn as_mut_bitslice(&mut self) -> &mut BitSlice<C, T>

Accesses the BitSlice<C, T> to which the BitBox refers.

Parameters

• &mut self

Returns

The slice of bits behind the box.

pub fn as_slice(&self) -> &[T]

Accesses the vector’s backing store as an element slice.

Unlike BitSlice’s method of the same name, this includes the partial edges, as BitBox forbids fragmentation that leads to contention.

Parameters

• &self

Returns

The slice of all live elements in the backing storage, including the partial edges if present.

pub fn as_mut_slice(&mut self) -> &mut [T]

Accesses the vector’s backing store as an element slice.

Unlike BitSlice’s method of the same name, this includes the partial edges, as BitBox forbids fragmentation that leads to contention.

Parameters

• &mut self

Returns

The slice of all live elements in the backing storage, including the partial edges if present.

Methods from Deref<Target = BitSlice<C, T>>

pub fn len(&self) -> usize

Returns the number of bits in the slice.

Examples

let bits = 0u8.bits::<Local>();
assert_eq!(bits.len(), 8);

pub fn is_empty(&self) -> bool

Returns true if the slice has a length of 0.

Examples

let bits = 0u8.bits::<Local>();
assert!(!bits.is_empty());

assert!(BitSlice::<Local, Word>::empty().is_empty())

pub fn first(&self) -> Option<&bool>

Returns the first bit of the slice, or None if it is empty.

Examples

let bits = 1u8.bits::<LittleEndian>();
assert_eq!(bits.first(), Some(&true));

assert!(BitSlice::<Local, Word>::empty().first().is_none());

pub fn first_mut(&mut self) -> Option<BitMut<C, T>>

Returns a mutable pointer to the first bit of the slice, or None if it is empty.

Examples

let mut data = 0u8;
let bits = data.bits_mut::<LittleEndian>();
if let Some(mut first) = bits.first_mut() {
    *first = true;
}
assert_eq!(data, 1u8);

pub fn split_first(&self) -> Option<(&bool, &Self)>

Returns the first and all the rest of the bits of the slice, or None if it is empty.

Examples

let bits = 1u8.bits::<LittleEndian>();
if let Some((first, rest)) = bits.split_first() {
    assert_eq!(first, &true);
    assert_eq!(rest, &bits[1 ..]);
}

pub fn split_first_mut(&mut self) -> Option<(BitMut<C, T>, &mut Self)>

Returns the first and all the rest of the bits of the slice, or None if it is empty.

Examples

let mut data = 0u8;
let bits = data.bits_mut::<LittleEndian>();
if let Some((mut first, rest)) = bits.split_first_mut() {
    *first = true;
    *rest.at(0) = true;
    *rest.at(1) = true;
}
assert_eq!(data, 7);

pub fn split_last(&self) -> Option<(&bool, &Self)>

Returns the last and all the rest of the bits of the slice, or None if it is empty.

Examples

let bits = 1u8.bits::<BigEndian>();
if let Some((last, rest)) = bits.split_last() {
    assert_eq!(last, &true);
    assert_eq!(rest, &bits[.. 7]);
}

pub fn split_last_mut(&mut self) -> Option<(BitMut<C, T>, &mut Self)>

Returns the last and all the rest of the bits of the slice, or None if it is empty.

Examples

let mut data = 0u8;
let bits = data.bits_mut::<BigEndian>();
if let Some((mut last, rest)) = bits.split_last_mut() {
    *last = true;
    *rest.at(0) = true;
    *rest.at(1) = true;
}
assert_eq!(data, 128 | 64 | 1);

pub fn last(&self) -> Option<&bool>

Returns the last bit of the slice, or None if it is empty.

Examples

let bits = 1u8.bits::<BigEndian>();
assert_eq!(Some(&true), bits.last());
assert!(BitSlice::<Local, Word>::empty().last().is_none());

pub fn last_mut(&mut self) -> Option<BitMut<C, T>>

Returns a mutable pointer to the last bit in the slice.

Examples

let mut data = 0u8;
let bits = data.bits_mut::<BigEndian>();
if let Some(mut last) = bits.last_mut() {
    *last = true;
}
assert!(bits[7]);

pub fn get<'a, I>(
    &'a self,
    index: I
) -> Option<<I as BitSliceIndex<'a, C, T>>::ImmutOutput> where
    I: BitSliceIndex<'a, C, T>, 

Returns a reference to a bit or subslice depending on the type of index.

• If given a position, returns a reference to the bit at that position or None if out of bounds.
• If given a range, returns the subslice corresponding to that range, or None if out of bounds.

Examples

let data = 1u8;
let bits = data.bits::<LittleEndian>();
assert_eq!(Some(&true), bits.get(0));
assert!(bits.get(8).is_none());
assert!(bits.get(1 ..).expect("in bounds").not_any());
assert!(bits.get(.. 12).is_none());

pub fn get_mut<'a, I>(
    &'a mut self,
    index: I
) -> Option<<I as BitSliceIndex<'a, C, T>>::MutOutput> where
    I: BitSliceIndex<'a, C, T>, 

Returns a mutable reference to a bit or subslice depending on the type of index (see get) or None if the index is out of bounds.

Examples

let mut data = 0u8;
let bits = data.bits_mut::<LittleEndian>();
if let Some(mut bit) = bits.get_mut(1) {
    *bit = true;
}
if let Some(bits) = bits.get_mut(5 .. 7) {
    bits.set_all(true);
}
assert_eq!(data, 64 | 32 | 2);

pub unsafe fn get_unchecked<'a, I>(
    &'a self,
    index: I
) -> <I as BitSliceIndex<'a, C, T>>::ImmutOutput where
    I: BitSliceIndex<'a, C, T>, 

Returns a reference to a bit or subslice, without doing bounds checking.

This is generally not recommended; use with caution! For a safe alternative, see get.

Safety

As this function does not perform boundary checking, the caller must ensure that self is an index within the boundaries of slice before calling in order to avoid boundary escapes and ensuing safety violations.

Examples

let data = 4u8;
let bits = data.bits::<LittleEndian>();
unsafe {
    assert!(bits.get_unchecked(2));
    assert!(!bits.get_unchecked(1));
}

pub unsafe fn get_unchecked_mut<'a, I>(
    &'a mut self,
    index: I
) -> <I as BitSliceIndex<'a, C, T>>::MutOutput where
    I: BitSliceIndex<'a, C, T>, 

Returns a mutable reference to a bit or subslice, without doing bounds checking.

This is generally not recommended; use with caution! For a safe alternative, see get_mut.

Safety

As this function does not perform boundary checking, the caller must ensure that self is an index within the boundaries of slice before calling in order to avoid boundary escapes and ensuing safety violations.

Examples

let mut data = 0u8;
let bits = data.bits_mut::<BigEndian>();
unsafe {
    let mut bit = bits.get_unchecked_mut(0);
    *bit = true;
    drop(bit); // release the borrow immediately
    let bits = bits.get_unchecked_mut(6 ..);
    bits.set_all(true);
}
assert_eq!(data, 1 | 2 | 128);

pub fn as_ptr(&self) -> *const T

Returns a raw pointer to the slice’s buffer.

The caller must ensure that the slice outlives the pointer this function returns, or else it will end up pointing to garbage.

The caller must also ensure that the memory the pointer (non-transitively) points to is never written to (except inside an UnsafeCell) using this pointer or any pointer derived from it. If you need to mutate the contents of the buffer, use as_mut_ptr.

Modifying the container referenced by this slice may cause its buffer to be reallocated, which would also make any pointers to it invalid.

Notes

This pointer is always to the first T element in the backing storage, even if that element is only partially used by the self slice. Multiple separate BitSlice handles may produce the same pointer with this method.

Examples

let data = [0u8; 2];
let bits = data.bits::<BigEndian>();
let (head, rest) = bits.split_at(4);
assert_eq!(head.as_ptr(), rest.as_ptr());

pub fn as_mut_ptr(&mut self) -> *mut T

Returns an unsafe mutable pointer to the slice’s buffer.

The caller must ensure thath the slice outlives the pointer this function returns, or else it will end up pointing to garbage.

Modifying the container referenced by this slice may couse its buffer to be reallocated, which would also make any pointers to it invalid.

Notes

This pointer is always to the first T element in the backing storage, even if that element is only partially used by the self slice. Multiple separate BitSlice handles may produce the same pointer with this method.

Examples

let mut data = [0u8; 2];
let bits = data.bits_mut::<BigEndian>();
let (head, rest) = bits.split_at_mut(4);
assert_eq!(head.as_mut_ptr(), rest.as_mut_ptr());
unsafe { *head.as_mut_ptr() = 2; }
assert!(rest[2]);

pub fn swap(&mut self, a: usize, b: usize)

Swaps two bits in the slice.

Arguments

• a: The index of the first bit
• b: The index of the second bit

Panics

Panics if a or b are out of bounds.

Examples

let mut data = 2u8;
let bits = data.bits_mut::<LittleEndian>();
bits.swap(0, 1);
assert_eq!(data, 1);

pub fn reverse(&mut self)

Reverses the order of bits in the slice, in place.

Examples

use bitvec::prelude::*;
let mut data = 0b1_1001100u8;
let bits = data.bits_mut::<BigEndian>();
bits[1 ..].reverse();
assert_eq!(data, 0b1_0011001);

Important traits for Iter<'a, C, T>

impl<'a, C, T> Iterator for Iter<'a, C, T> where
    C: Cursor,
    T: 'a + BitStore,  type Item = &'a bool;

pub fn iter(&self) -> Iter<C, T>

Returns an iterator over the slice.

Examples

let data = 3u8;
let bits = data.bits::<LittleEndian>();
let mut iter = bits[.. 4].iter();
assert_eq!(iter.next(), Some(&true));
assert_eq!(iter.next(), Some(&true));
assert_eq!(iter.next(), Some(&false));
assert_eq!(iter.next(), Some(&false));
assert!(iter.next().is_none());

Important traits for IterMut<'a, C, T>

impl<'a, C, T> Iterator for IterMut<'a, C, T> where
    C: Cursor,
    T: 'a + BitStore,  type Item = BitMut<'a, C, T>;

pub fn iter_mut(&mut self) -> IterMut<C, T>

Returns an iterator that allows modifying each bit.

Examples

let mut data = 0u8;
let bits = &mut data.bits_mut::<LittleEndian>()[.. 2];
for mut bit in bits.iter_mut() {
    *bit = true;
}
assert_eq!(data, 3);

Important traits for Windows<'a, C, T>

impl<'a, C, T> Iterator for Windows<'a, C, T> where
    C: Cursor,
    T: 'a + BitStore,  type Item = &'a BitSlice<C, T>;

pub fn windows(&self, width: usize) -> Windows<C, T>

Returns an iterator over all contiguous windows of width width.

The windows overlap. If the slice is shorter than width, the iterator returns no values.

Panics

Panics if width is 0.

Examples

let data = 0b100_010_01u8;
let bits = data.bits::<BigEndian>();
let mut iter = bits[.. 5].windows(3);
assert_eq!(iter.next().unwrap(), &bits[0 .. 3]);
assert_eq!(iter.next().unwrap(), &bits[1 .. 4]);
assert_eq!(iter.next().unwrap(), &bits[2 .. 5]);
assert!(iter.next().is_none());

If the slice is shorter than width:

let data = 0u8;
let bits = data.bits::<Local>();
let mut iter = bits[.. 3].windows(4);
assert!(iter.next().is_none());

Important traits for Chunks<'a, C, T>

impl<'a, C, T> Iterator for Chunks<'a, C, T> where
    C: Cursor,
    T: 'a + BitStore,  type Item = &'a BitSlice<C, T>;

pub fn chunks(&self, chunk_size: usize) -> Chunks<C, T>

Returns an iterator over chunk_size bits of the slice at a time, starting at the beginning of the slice.

The chunks are slices and do not overlap. If chunk_size does not divide the length of the slice, then the last chunk will not have length chunk_size.

See chunks_exact for a variant of this iterator that returns chunks of always exactly chunk_size elements, and rchunks for the same iterator but starting at the end of the slice.

Panics

Panics if chunk_size is 0.

Examples

let data = 0b001_010_10u8;
let bits = data.bits::<BigEndian>();
let mut iter = bits.chunks(3);
assert_eq!(iter.next().unwrap(), &bits[0 .. 3]);
assert_eq!(iter.next().unwrap(), &bits[3 .. 6]);
assert_eq!(iter.next().unwrap(), &bits[6 .. 8]);
assert!(iter.next().is_none());

Important traits for ChunksMut<'a, C, T>

impl<'a, C, T> Iterator for ChunksMut<'a, C, T> where
    C: Cursor,
    T: 'a + BitStore,  type Item = &'a mut BitSlice<C, T>;

pub fn chunks_mut(&mut self, chunk_size: usize) -> ChunksMut<C, T>

Returns an iterator over chunk_size bits of the slice at a time, starting at the beginning of the slice.

The chunks are mutable slices, and do not overlap. If chunk_size does not divide the length of the slice, then the last chunk will not have length chunk_size.

See chunks_exact_mut for a variant of this iterator that returns chunks of always exactly chunk_size bits, and rchunks_mut for the same iterator but starting at the end of the slice.

Panics

Panics if chunk_size is 0.

Examples

let mut data = 0u8;
let bits = data.bits_mut::<BigEndian>();
let mut count = 0;

for chunk in bits.chunks_mut(3) {
    chunk.store(4u8 >> count);
    count += 1;
}
assert_eq!(count, 3);
assert_eq!(data, 0b100_010_01);

Important traits for ChunksExact<'a, C, T>

impl<'a, C, T> Iterator for ChunksExact<'a, C, T> where
    C: Cursor,
    T: 'a + BitStore,  type Item = &'a BitSlice<C, T>;

pub fn chunks_exact(&self, chunk_size: usize) -> ChunksExact<C, T>

Returns an iterator over chunk_size elements of the slice at a time, starting at the beginning of the slice.

The chunks are slices and do not overlap. If chunk_size does not divide the length of the slice, then the last up to chunk_size - 1 elements will be omitted and can be retrieved from the remainder function of the iterator.

Due to each chunk having exactly chunk_size elements, the compiler can often optimize the resulting code better than in the case of chunks.

See chunks for a variant of this iterator that also returns the remainder as a smaller chunk, and rchunks_exact for the same iterator but starting at the end of the slice.

Panics

Panics if chunk_size is 0.

Examples

let data = 0b100_010_01u8;
let bits = data.bits::<BigEndian>();
let mut iter = bits.chunks_exact(3);
assert_eq!(iter.next().unwrap(), &bits[0 .. 3]);
assert_eq!(iter.next().unwrap(), &bits[3 .. 6]);
assert!(iter.next().is_none());
assert_eq!(iter.remainder(), &bits[6 .. 8]);

Important traits for ChunksExactMut<'a, C, T>

impl<'a, C, T> Iterator for ChunksExactMut<'a, C, T> where
    C: Cursor,
    T: 'a + BitStore,  type Item = &'a mut BitSlice<C, T>;

pub fn chunks_exact_mut(&mut self, chunk_size: usize) -> ChunksExactMut<C, T>

Returns an iterator over chunk_size elements of the slice at a time, starting at the beginning of the slice.

The chunks are mutable slices, and do not overlap. If chunk_size does not divide the length of the slice, then the last up to chunk_size - 1 elements will be omitted and can be retrieved from the into_remainder function of the iterator.

Due to each chunk having exactly chunk_size elements, the compiler can often optimize the resulting code better than in the case of chunks_mut.

See chunks_mut for a variant of this iterator that also returns the remainder as a smaller chunk, and rchunks_exact_mut for the same iterator but starting at the end of the slice of the slice.

Panics

Panics if chunk_size is 0.

Examples

let mut data = 0u8;
let bits = data.bits_mut::<BigEndian>();
let mut count = 0u8;

let mut iter = bits.chunks_exact_mut(3);
for chunk in &mut iter {
    chunk.store(4u8 >> count);
    count += 1;
}
iter.into_remainder().store(1u8);
assert_eq!(count, 2);
assert_eq!(data, 0b100_010_01);

Important traits for RChunks<'a, C, T>

impl<'a, C, T> Iterator for RChunks<'a, C, T> where
    C: Cursor,
    T: 'a + BitStore,  type Item = &'a BitSlice<C, T>;

pub fn rchunks(&self, chunk_size: usize) -> RChunks<C, T>

Returns an iterator over chunk_size bits of the slice at a time, starting at the end of the slice.

The chunks are slices and do not overlap. If chunk_size does not divide the length of the slice, then the last chunk will not have length of the slice, then the last chunk will not have length chunk_size.

See rchunks_exact for a variant of this iterator that returns chunks of always exactly chunk_size bits, and chunks for the same iterator but starting at the beginning of the slice.

Panics

Panics if chunk_size is 0.

Examples

let data = 0b01_010_100u8;
let bits = data.bits::<BigEndian>();
let mut iter = bits.rchunks(3);
assert_eq!(iter.next().unwrap(), &bits[5 .. 8]);
assert_eq!(iter.next().unwrap(), &bits[2 .. 5]);
assert_eq!(iter.next().unwrap(), &bits[0 .. 2]);
assert!(iter.next().is_none());

Important traits for RChunksMut<'a, C, T>

impl<'a, C, T> Iterator for RChunksMut<'a, C, T> where
    C: Cursor,
    T: 'a + BitStore,  type Item = &'a mut BitSlice<C, T>;

pub fn rchunks_mut(&mut self, chunk_size: usize) -> RChunksMut<C, T>

Returns an iterator over chunk_size bits of the slice at a time, starting at the end of the slice.

The chunks are mutable slices and do not overlap. If chunk_size does not divide the length of the slice, then the last chunk will not have length of the slice, then the last chunk will not have length chunk_size.

See rchunks_exact_mut for a variant of this iterator that returns chunks of always exactly chunk_size bits, and chunks_mut for the same iterator but starting at the beginning of the slice.

Panics

Panics if chunk_size is 0.

Examples

let mut data = 0u8;
let bits = data.bits_mut::<LittleEndian>();
let mut count = 0;

for chunk in bits.rchunks_mut(3) {
    chunk.store(4u8 >> count);
    count += 1;
}
assert_eq!(count, 3);
assert_eq!(data, 0b100_010_01);

Important traits for RChunksExact<'a, C, T>

impl<'a, C, T> Iterator for RChunksExact<'a, C, T> where
    C: Cursor,
    T: 'a + BitStore,  type Item = &'a BitSlice<C, T>;

pub fn rchunks_exact(&self, chunk_size: usize) -> RChunksExact<C, T>

Returns an iterator over chunk_size bits of the slice at a time, starting at the end of the slice.

The chunks are slices and do not overlap. If chunk_size does not divide the length of the slice, then the last up to chunk_size - 1 bits will be omitted and can be retrieved from the remainder function of the iterator.

Due to each chunk having exactly chunk_size bits, the compiler can often optimize the resulting code better than in the case of chunks.

See rchunks for a variant of this iterator that also returns the remainder as a smaller chunk, and chunks_exact for the same iterator but starting at the beginning of the slice.

Panics

Panics if chunk_size is 0.

Examples

let data = 0b100_010_01u8;
let bits = data.bits::<LittleEndian>();
let mut iter = bits.rchunks_exact(3);
assert_eq!(iter.next().unwrap(), &bits[5 .. 8]);
assert_eq!(iter.next().unwrap(), &bits[2 .. 5]);
assert!(iter.next().is_none());
assert_eq!(iter.remainder(), &bits[0 ..2]);

Important traits for RChunksExactMut<'a, C, T>

impl<'a, C, T> Iterator for RChunksExactMut<'a, C, T> where
    C: Cursor,
    T: 'a + BitStore,  type Item = &'a mut BitSlice<C, T>;

pub fn rchunks_exact_mut(&mut self, chunk_size: usize) -> RChunksExactMut<C, T>

Returns an iterator over chunk_size bits of the slice at a time, starting at the end of the slice.

The chunks are mutable slices, and do not overlap. If chunk_size does not divide the length of the slice, then the last up to chunk_size - 1 bits will be omitted and can be retrieved from the into_remainder function of the iterator.

Due to each chunk having exactly chunk_size bits, the compiler can often optimize the resulting code better than in the case of chunks_mut.

See rchunks_mut for a variant of this iterator that also returns the remainder as a smaller chunk, and chunks_exact_mut for the same iterator but starting at the beginning of the slice.

Panics

Panics if chunk_size is 0.

Examples

let mut data = 0u8;
let bits = data.bits_mut::<LittleEndian>();
let mut count = 0;
let mut iter = bits.rchunks_exact_mut(3);

for chunk in &mut iter {
    chunk.store(4u8 >> count);
    count += 1;
}
iter.into_remainder().store(1u8);
assert_eq!(data, 0b100_010_01);
assert_eq!(count, 2);

pub fn split_at(&self, mid: usize) -> (&Self, &Self)

Divides one slice into two at an index.

The first will contain all indices from [0, mid) (excluding the index mid itself) and the second will contain all indices from [mid, len) (excluding the index len itself).

Panics

Panics if mid > len.

Examples

let data = 0x0Fu8;
let bits = data.bits::<BigEndian>();

{
    let (left, right) = bits.split_at(0);
    assert!(left.is_empty());
    assert_eq!(right, bits);
}

{
    let (left, right) = bits.split_at(4);
    assert!(left.not_any());
    assert!(right.all());
}

{
    let (left, right) = bits.split_at(8);
    assert_eq!(left, bits);
    assert!(right.is_empty());
}

pub fn split_at_mut(&mut self, mid: usize) -> (&mut Self, &mut Self)

Divides one mutable slice into two at an index.

The first will contain all indices from [0, mid) (excluding the index mid itself) and the second will contain all indices from [mid, len) (excluding the index len itself).

Panics

Panics if mid > len.

Examples

let mut data = 0x0Fu8;
let bits = data.bits_mut::<BigEndian>();

let (left, right) = bits.split_at_mut(4);
assert!(left.not_any());
assert!(right.all());
*left.at(1) = true;
*right.at(2) = false;

assert_eq!(data, 0b0100_1101);

Important traits for Split<'a, C, T, F>

impl<'a, C, T, F> Iterator for Split<'a, C, T, F> where
    C: Cursor,
    T: 'a + BitStore,
    F: FnMut(usize, &bool) -> bool,  type Item = &'a BitSlice<C, T>;

pub fn split<F>(&self, func: F) -> Split<C, T, F> where
    F: FnMut(usize, &bool) -> bool, 

Returns an iterator over subslices separated by indexed bits that satisfy the predicate function. The matched position is not contained in the subslices.

API Differences

The slice::split method takes a predicate function with signature (&T) -> bool, whereas this method’s predicate function has signature (usize, &T) -> bool. This difference is in place because BitSlice by definition has only one bit of information per slice item, and including the index allows the callback function to make more informed choices.

Examples

let data = 0b01_001_000u8;
let bits = data.bits::<BigEndian>();
let mut iter = bits.split(|pos, bit| *bit);

assert_eq!(iter.next().unwrap(), &bits[0 .. 1]);
assert_eq!(iter.next().unwrap(), &bits[2 .. 4]);
assert_eq!(iter.next().unwrap(), &bits[5 .. 8]);
assert!(iter.next().is_none());

If the first position is matched, an empty slice will be the first item returned by the iterator. Similarly, if the last position in the slice is matched, an empty slice will be the last item returned by the iterator:

let data = 1u8;
let bits = data.bits::<BigEndian>();
let mut iter = bits.split(|pos, bit| *bit);

assert_eq!(iter.next().unwrap(), &bits[0 .. 7]);
assert_eq!(iter.next().unwrap(), BitSlice::<Local, Word>::empty());
assert!(iter.next().is_none());

If two matched positions are directly adjacent, an empty slice will be present between them.

let data = 0b001_100_00u8;
let bits = data.bits::<BigEndian>();
let mut iter = bits.split(|pos, bit| *bit);

assert_eq!(iter.next().unwrap(), &bits[0 .. 2]);
assert_eq!(iter.next().unwrap(), BitSlice::<Local, Word>::empty());
assert_eq!(iter.next().unwrap(), &bits[4 .. 8]);
assert!(iter.next().is_none());

Important traits for SplitMut<'a, C, T, F>

impl<'a, C, T, F> Iterator for SplitMut<'a, C, T, F> where
    C: Cursor,
    T: 'a + BitStore,
    F: FnMut(usize, &bool) -> bool,  type Item = &'a mut BitSlice<C, T>;

pub fn split_mut<F>(&mut self, func: F) -> SplitMut<C, T, F> where
    F: FnMut(usize, &bool) -> bool, 

Returns an iterator over mutable subslices separated by indexed bits that satisfy the predicate function. The matched position is not contained in the subslices.

API Differences

The slice::split_mut method takes a predicate function with signature (&T) -> bool, whereas this method’s predicate function has signature (usize, &T) -> bool. This difference is in place because BitSlice by definition has only one bit of information per slice item, and including the index allows the callback function to make more informed choices.

Examples

let mut data = 0b001_000_10u8;
let bits = data.bits_mut::<BigEndian>();

for group in bits.split_mut(|pos, bit| *bit) {
    *group.at(0) = true;
}
assert_eq!(data, 0b101_1001_1u8);

Important traits for RSplit<'a, C, T, F>

impl<'a, C, T, F> Iterator for RSplit<'a, C, T, F> where
    C: Cursor,
    T: 'a + BitStore,
    F: FnMut(usize, &bool) -> bool,  type Item = &'a BitSlice<C, T>;

pub fn rsplit<F>(&self, func: F) -> RSplit<C, T, F> where
    F: FnMut(usize, &bool) -> bool, 

Returns an iterator over subslices separated by indexed bits that satisfy a predicate function, starting at the end of the slice and working backwards. The matched position is not contained in the subslices.

API Differences

The slice::rsplit method takes a predicate function with signature (&T) -> bool, whereas this method’s predicate function has signature (usize, &T) -> bool. This difference is in place because BitSlice by definition has only one bit of information per slice item, and including the index allows the callback function to make more informed choices.

Examples

let data = 0b0001_0000u8;
let bits = data.bits::<BigEndian>();
let mut iter = bits.rsplit(|pos, bit| *bit);

assert_eq!(iter.next().unwrap(), &bits[4 .. 8]);
assert_eq!(iter.next().unwrap(), &bits[0 .. 3]);
assert!(iter.next().is_none());

As with split(), if the first or last position is matched, an empty slice will be the first (or last) item returned by the iterator.

let data = 0b1001_0001u8;
let bits = data.bits::<BigEndian>();
let mut iter = bits.rsplit(|pos, bit| *bit);
assert!(iter.next().unwrap().is_empty());
assert_eq!(iter.next().unwrap(), &bits[4 .. 7]);
assert_eq!(iter.next().unwrap(), &bits[1 .. 3]);
assert!(iter.next().unwrap().is_empty());
assert!(iter.next().is_none());

Important traits for RSplitMut<'a, C, T, F>

impl<'a, C, T, F> Iterator for RSplitMut<'a, C, T, F> where
    C: Cursor,
    T: 'a + BitStore,
    F: FnMut(usize, &bool) -> bool,  type Item = &'a mut BitSlice<C, T>;

pub fn rsplit_mut<F>(&mut self, func: F) -> RSplitMut<C, T, F> where
    F: FnMut(usize, &bool) -> bool, 

Returns an iterator over mutable subslices separated by indexed bits that satisfy a predicate function, starting at the end of the slice and working backwards. The matched position is not contained in the subslices.

API Differences

The slice::rsplit_mut method takes a predicate function with signature (&T) -> bool, whereas this method’s predicate function has signature (usize, &T) -> bool. This difference is in place because BitSlice by definition has only one bit of information per slice item, and including the index allows the callback function to make more informed choices.

Examples

let mut data = 0u8;
let bits = data.bits_mut::<BigEndian>();

let mut count = 0u8;
for group in bits.rsplit_mut(|pos, bit| pos % 3 == 2) {
    count += 1;
    group.store(count);
}
assert_eq!(data, 0b11_0_10_0_01);

Important traits for SplitN<'a, C, T, F>

impl<'a, C, T, F> Iterator for SplitN<'a, C, T, F> where
    C: Cursor,
    T: 'a + BitStore,
    F: FnMut(usize, &bool) -> bool,  type Item = &'a BitSlice<C, T>;

pub fn splitn<F>(&self, n: usize, func: F) -> SplitN<C, T, F> where
    F: FnMut(usize, &bool) -> bool, 

Returns an iterator over subslices separated by indexed bits that satisfy the predicate function, limited to returning at most n items. The matched position is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

API Differences

The slice::splitn method takes a predicate function with signature (&T) -> bool, whereas this method’s predicate function has signature (usize, &T) -> bool. This difference is in place because BitSlice by definition has only one bit of information per slice item, and including the index allows the callback function to make more informed choices.

Examples

Print the slice split once by indices divisible by 3:

let data = 0xA5u8;
let bits = data.bits::<BigEndian>();

for group in bits.splitn(2, |pos, bit| pos % 3 == 2) {
    println!("{}", group);
}
//  [10]
//  [00101]

Important traits for SplitNMut<'a, C, T, F>

impl<'a, C, T, F> Iterator for SplitNMut<'a, C, T, F> where
    C: Cursor,
    T: 'a + BitStore,
    F: FnMut(usize, &bool) -> bool,  type Item = &'a mut BitSlice<C, T>;

pub fn splitn_mut<F>(&mut self, n: usize, func: F) -> SplitNMut<C, T, F> where
    F: FnMut(usize, &bool) -> bool, 

Returns an iterator over mutable subslices separated by indexed bits that satisfy the predicate function, limited to returning at most n items. The matched position is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

API Differences

The slice::splitn_mut method takes a predicate function with signature (&T) -> bool, whereas this method’s predicate function has signature (usize, &T) -> bool. This difference is in place because BitSlice by definition has only one bit of information per slice item, and including the index allows the callback function to make more informed choices.

Examples

let mut data = 0u8;
let bits = data.bits_mut::<BigEndian>();
let mut counter = 0u8;

for group in bits.splitn_mut(2, |pos, bit| pos % 4 == 3) {
    counter += 1;
    group.store(counter);
}
assert_eq!(data, 0b001_0_0010);

Important traits for RSplitN<'a, C, T, F>

impl<'a, C, T, F> Iterator for RSplitN<'a, C, T, F> where
    C: Cursor,
    T: 'a + BitStore,
    F: FnMut(usize, &bool) -> bool,  type Item = &'a BitSlice<C, T>;

pub fn rsplitn<F>(&self, n: usize, func: F) -> RSplitN<C, T, F> where
    F: FnMut(usize, &bool) -> bool, 

Returns an iterator over subslices separated by indexed bits that satisfy a predicate function, limited to returning at most n items. This starts at the end of the slice and works backwards. The matched position is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

API Differences

The slice::rsplitn method takes a predicate function with signature (&T) -> bool, whereas this method’s predicate function has signature (usize, &T) -> bool. This difference is in place because BitSlice by definition has only one bit of information per slice item, and including the index allows the callback function to make more informed choices.

Examples

Print the slice split once, starting from the end, by indices divisible by 3:

let data = 0xA5u8;
let bits = data.bits::<BigEndian>();

for group in bits.rsplitn(2, |pos, bit| pos % 3 == 2) {
    println!("{}", group);
}
//  [01]
//  [10100]

Important traits for RSplitNMut<'a, C, T, F>

impl<'a, C, T, F> Iterator for RSplitNMut<'a, C, T, F> where
    C: Cursor,
    T: 'a + BitStore,
    F: FnMut(usize, &bool) -> bool,  type Item = &'a mut BitSlice<C, T>;

pub fn rsplitn_mut<F>(&mut self, n: usize, func: F) -> RSplitNMut<C, T, F> where
    F: FnMut(usize, &bool) -> bool, 

Returns an iterator over mutable subslices separated by indexed bits that satisfy a predicate function, limited to returning at most n items. This starts at the end of the slice and works backwards. The matched position is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

API Differences

The slice::rsplitn_mut method takes a predicate function with signature (&T) -> bool, whereas this method’s predicate function has signature (usize, &T) -> bool. This difference is in place because BitSlice by definition has only one bit of information per slice item, and including the index allows the callback function to make more informed choices.

Examples

let mut data = 0u8;
let bits = data.bits_mut::<BigEndian>();
let mut counter = 0u8;

for group in bits.rsplitn_mut(2, |pos, bit| pos % 3 == 2) {
    counter += 1;
    group.store(counter);
}
assert_eq!(data, 0b00010_0_01);

pub fn contains<D, U>(&self, query: &BitSlice<D, U>) -> bool where
    D: Cursor,
    U: BitStore, 

Returns true if the slice contains a region that matches the given span.

API Differences

The slice::contains method tests for a single slice element. Because this is a slice of single bits, testing for the presence of one bool value is not very informative. This instead searches for a subslice, which may be one or more bits.

Examples

let data = 0b0101_1010u8;
let bits_be = data.bits::<BigEndian>();
let bits_le = data.bits::<LittleEndian>();
assert!(bits_be.contains(&bits_le[1 .. 5]));

This example uses a palindrome pattern to demonstrate that the query does not need to have the same type parameters as the searched slice.

pub fn starts_with<D, U>(&self, prefix: &BitSlice<D, U>) -> bool where
    D: Cursor,
    U: BitStore, 

Returns true if prefix is a prefix of the slice.

Examples

let data = 0b0110_1110u8;
let bits = data.bits::<BigEndian>();
assert!(bits.starts_with(&data.bits::<LittleEndian>()[.. 2]));

pub fn ends_with<D, U>(&self, suffix: &BitSlice<D, U>) -> bool where
    D: Cursor,
    U: BitStore, 

Returns true if suffix is a suffix of the slice.

Examples

let data = 0b0111_1010u8;
let bits = data.bits::<BigEndian>();
assert!(bits.ends_with(&data.bits::<LittleEndian>()[6 ..]));

pub fn rotate_left(&mut self, by: usize)

Rotates the slice in-place such that the first by bits of the slice move to the end while the last self.len() - by bits move to the front. After calling rotate_left, the bit previously at index by will become the first bit in the slice.

Panics

This function will panic if by is greater than the length of the slice. Note that by == self.len() does not panic and is a no-op rotation.

Complexity

Takes linear (in self.len()) time.

Examples

let mut data = 0xF0u8;
let bits = data.bits_mut::<BigEndian>();
bits.rotate_left(2);
assert_eq!(data, 0xC3);

Rotating a subslice:

let mut data = 0xF0u8;
let bits = data.bits_mut::<BigEndian>();
bits[1 .. 5].rotate_left(1);
assert_eq!(data, 0b1_1101_000);

pub fn rotate_right(&mut self, by: usize)

Rotates the slice in-place such that the first self.len() - by bits of the slice move to the end while the last by bits move to the front. After calling rotate_right, the bit previously at index self.len() - by will become the first bit in the slice.

Panics

This function will panic if by is greater than the length of the slice. Note that by == self.len() does not panic and is a no-op rotation.

Complexity

Takes linear (in self.len()) time.

Examples

let mut data = 0xF0u8;
let bits = data.bits_mut::<BigEndian>();
bits.rotate_right(2);
assert_eq!(data, 0x3C);

Rotate a subslice:

let mut data = 0xF0u8;
let bits = data.bits_mut::<BigEndian>();
bits[1 .. 5].rotate_right(1);
assert_eq!(data, 0b1_0111_000);

pub fn clone_from_slice<D, U>(&mut self, src: &BitSlice<D, U>) where
    D: Cursor,
    U: BitStore, 

Copies the elements from src into self.

The length of src must be the same as self.

This is equivalent to copy_from_slice; this function is only included for API surface equivalence.

Panics

This function will panic if the two slices have different lengths.

Examples

let mut data = 0u8;
let bits = data.bits_mut::<BigEndian>();
let src = 0x0Fu16.bits::<LittleEndian>();
bits.clone_from_slice(&src[.. 8]);
assert_eq!(data, 0xF0);

Rust enforces that there can only be one mutable reference with no immutable references to a particular piece of data in a particular scope. Because of this, attempting to use clone_from_slice on a single slice will result in a compile failure:

let mut data = 3u8;
let bits = data.bits_mut::<BigEndian>();
bits[.. 2].clone_from_slice(&bits[6 ..]);

To work around this, we can use [split_at_mut] to create two distinct sub-slices from a slice:

let mut data = 3u8;
let bits = data.bits_mut::<BigEndian>();
let (head, tail) = bits.split_at_mut(4);
head.clone_from_slice(tail);
assert_eq!(data, 0x33);

pub fn copy_from_slice(&mut self, src: &Self)

Copies the elements from src into self.

The length of src must be the same as self.

This is restricted to take exactly the same type of bit slice as the source slice, so that the implementation has the chace to use faster memcpy if possible.

Panics

This function will panic if the two slices have different lengths.

Examples

let mut data = 0u8;
let bits = data.bits_mut::<BigEndian>();
let src = 0x0Fu8.bits::<BigEndian>();
bits.copy_from_slice(src);
assert_eq!(data, 0x0F);

Rust enforces that there can only be one mutable reference with no immutable references to a particular piece of data in a particular scope. Because of this, attempting to use copy_from_slice on a single slice will result in a compile failure:

let mut data = 3u8;
let bits = data.bits_mut::<BigEndian>();
bits[.. 2].copy_from_slice(&bits[6 ..]);

To work around this, we can use [split_at_mut] to create two distinct sub-slices from a slice:

let mut data = 3u8;
let bits = data.bits_mut::<BigEndian>();
let (head, tail) = bits.split_at_mut(4);
head.copy_from_slice(tail);
assert_eq!(data, 0x33);

pub fn swap_with_slice<D, U>(&mut self, other: &mut BitSlice<D, U>) where
    D: Cursor,
    U: BitStore, 

Swaps all bits in self with those in other.

The length of other must be the same as self.

Panics

This function will panic if the two slices hav different lengths.

Example

Swapping two elements across slices:

let mut a = 0u8;
let mut b = 0x96A5u16;
let bits_a = a.bits_mut::<LittleEndian>();
let bits_b = b.bits_mut::<BigEndian>();

bits_a.swap_with_slice(&mut bits_b[4 .. 12]);

assert_eq!(a, 0x56);
assert_eq!(b, 0x9005);

Rust enforces that there can only be one mutable reference to a particular piece of data in a particular scope. Because of this, attempting to use swap_with_slice on a single slice will result in a compile failure:

let mut data = 15u8;
let bits = data.bits_mut::<BigEndian>();
bits[.. 3].swap_with_slice(&mut bits[5 ..]);

To work around this, we can use [split_at_mut] to create two distinct mutable sub-slices from a slice:

let mut data = 15u8;
let bits = data.bits_mut::<BigEndian>();

{
    let (left, right) = bits.split_at_mut(4);
    left[.. 2].swap_with_slice(&mut right[2 ..]);
}

assert_eq!(data, 0xCC);

pub unsafe fn align_to<U>(&self) -> (&Self, &BitSlice<C, U>, &Self) where
    U: BitStore, 

Transmute the slice to a slice with a different backing store, ensuring alignment of the types is maintained.

This method splits the slice into three distinct slices: prefix, correctly aligned middle slice of a new backing type, and the suffix slice. The method does a best effort to make the middle slice the greatest length possible for a given type and input slice, but only your algorithm’s performance should depend on that, not its correctness.

Safety

This method is essentially a transmute with respect to the elements in the returned middle slice, so all the usual caveats pertaining to transmute::<T, U> also apply here.

Examples

Basic usage:

unsafe {
    let bytes: [u8; 7] = [1, 2, 3, 4, 5, 6, 7];
    let bits = bytes.bits::<Local>();
    let (prefix, shorts, suffix) = bits.align_to::<u16>();
    match prefix.len() {
        0 => {
            assert_eq!(shorts, bits[.. 48]);
            assert_eq!(suffix, bits[48 ..]);
        },
        8 => {
            assert_eq!(prefix, bits[.. 8]);
            assert_eq!(shorts, bits[8 ..]);
        },
        _ => unreachable!("This case will not occur")
    }
}

pub unsafe fn align_to_mut<U>(
    &mut self
) -> (&mut Self, &mut BitSlice<C, U>, &mut Self) where
    U: BitStore, 

Transmute the slice to a slice with a different backing store, ensuring alignment of the types is maintained.

This method splits the slice into three distinct slices: prefix, correctly aligned middle slice of a new backing type, and the suffix slice. The method does a best effort to make the middle slice the greatest length possible for a given type and input slice, but only your algorithm’s performance should depend on that, not its correctness.

Safety

This method is essentially a transmute with respect to the elements in the returned middle slice, so all the usual caveats pertaining to transmute::<T, U> also apply here.

Examples

Basic usage:

unsafe {
    let mut bytes: [u8; 7] = [1, 2, 3, 4, 5, 6, 7];
    let bits = bytes.bits_mut::<Local>();
    let (prefix, shorts, suffix) = bits.align_to_mut::<u16>();
    //  same access and behavior as in `align_to`
}

pub fn to_vec(&self) -> BitVec<C, T>

Copies self into a new BitVec.

Examples

let data = [0u8, !0u8];
let bits = data.bits::<Local>();
let vec = bits.to_vec();
assert_eq!(bits, vec);

pub fn set(&mut self, index: usize, value: bool)

Sets the bit value at the given position.

Parameters

• &mut self
• index: The bit index to set. It must be in the domain 0 .. self.len().
• value: The value to be set, true for 1 and false for 0.

Panics

This method panics if index is outside the slice domain.

Examples

use bitvec::prelude::*;

let mut store = 8u8;
let bits = store.bits_mut::<BigEndian>();
assert!(!bits[3]);
bits.set(3, true);
assert!(bits[3]);

pub unsafe fn set_unchecked(&mut self, index: usize, value: bool)

Sets a bit at an index, without doing bounds checking.

This is generally not recommended; use with caution! For a safe alternative, see set.

Parameters

• &mut self
• index: The bit index to retrieve. This index is not checked against the length of self.

Effects

The bit at index is set to value.

Safety

This method is not safe. It performs raw pointer arithmetic to seek from the start of the slice to the requested index, and set the bit there. It does not inspect the length of self, and it is free to perform out-of-bounds memory write access.

Use this method only when you have already performed the bounds check, and can guarantee that the call occurs with a safely in-bounds index.

Examples

This example uses a bit slice of length 2, and demonstrates out-of-bounds access to the last bit in the element.

use bitvec::prelude::*;

let mut src = 0u8;
{
 let bits = &mut src.bits_mut::<BigEndian>()[2 .. 4];
 assert_eq!(bits.len(), 2);
 unsafe { bits.set_unchecked(5, true); }
}
assert_eq!(src, 1);

pub fn at(&mut self, index: usize) -> BitMut<C, T>

Produces a write reference to a single bit in the slice.

The structure returned by this method extends the borrow until it drops, which precludes parallel use.

The split_at_mut method allows splitting the borrows of a slice, and will enable safe parallel use of these write references. The atomic feature guarantees that parallel use does not cause data races when modifying the underlying slice.

Lifetimes

• 'a Propagates the lifetime of the referent slice to the single-bit reference produced.

Parameters

• &mut self
• index: The index of the bit in self selected.

Returns

A write reference to the requested bit. Due to Rust limitations, this is not a native reference type, but is a custom structure that holds the address of the requested bit and its value. The produced structure implements Deref and DerefMut to its cached bit, and commits the cached bit to the parent slice on drop.

Usage

You must use the dereference operator on the .at() expression in order to assign to it. In general, you should prefer immediately using and discarding the returned value, rather than binding it to a name and letting it live for more than one statement.

Examples

use bitvec::prelude::*;

let mut src = 0u8;
let bits = src.bits_mut::<BigEndian>();

assert!(!bits[0]);
*bits.at(0) = true;
//  note the leading dereference.
assert!(bits[0]);

This example shows multiple usage by using split_at_mut.

use bitvec::prelude::*;

let mut src = 0u8;
let bits = src.bits_mut::<BigEndian>();

{
 let (mut a, rest) = bits.split_at_mut(2);
 let (mut b, rest) = rest.split_at_mut(3);
 *a.at(0) = true;
 *b.at(0) = true;
 *rest.at(0) = true;
}

assert_eq!(bits.as_slice()[0], 0b1010_0100);
//                               a b   rest

The above example splits the slice into three (the first, the second, and the rest) in order to hold multiple write references into the slice.

pub unsafe fn at_unchecked(&mut self, index: usize) -> BitMut<C, T>

Version of at that does not perform boundary checking.

Safety

If index is outside the boundaries of self, then this function will induce safety violations. The caller must ensure that index is within the boundaries of self before calling.

pub unsafe fn split_at_unchecked(&self, mid: usize) -> (&Self, &Self)

Version of split_at that does not perform boundary checking.

Safety

If mid is outside the boundaries of self, then this function will induce safety violations. The caller must ensure that mid is within the boundaries of self before calling.

pub unsafe fn split_at_mut_unchecked(
    &mut self,
    mid: usize
) -> (&mut Self, &mut Self)

Version of split_at_mut that does not perform boundary checking.

Safety

If mid is outside the boundaries of self, then this function will induce safety violations. The caller must ensure that mid is within the boundaries of self before calling.

pub fn all(&self) -> bool

Tests if all bits in the slice domain are set (logical ∧).

Truth Table

0 0 => 0
0 1 => 0
1 0 => 0
1 1 => 1

Parameters

• &self

Returns

Whether all bits in the slice domain are set. The empty slice returns true.

Examples

use bitvec::prelude::*;

let bits = 0xFDu8.bits::<BigEndian>();
assert!(bits[.. 4].all());
assert!(!bits[4 ..].all());

pub fn any(&self) -> bool

Tests if any bit in the slice is set (logical ∨).

Truth Table

0 0 => 0
0 1 => 1
1 0 => 1
1 1 => 1

Parameters

• &self

Returns

Whether any bit in the slice domain is set. The empty slice returns false.

Examples

use bitvec::prelude::*;

let bits = 0x40u8.bits::<BigEndian>();
assert!(bits[.. 4].any());
assert!(!bits[4 ..].any());

pub fn not_all(&self) -> bool

Tests if any bit in the slice is unset (logical ¬∧).

Truth Table

0 0 => 1
0 1 => 1
1 0 => 1
1 1 => 0

Parameters

• `&self

Returns

Whether any bit in the slice domain is unset.

Examples

use bitvec::prelude::*;

let bits = 0xFDu8.bits::<BigEndian>();
assert!(!bits[.. 4].not_all());
assert!(bits[4 ..].not_all());

pub fn not_any(&self) -> bool

Tests if all bits in the slice are unset (logical ¬∨).

Truth Table

0 0 => 1
0 1 => 0
1 0 => 0
1 1 => 0

Parameters

• &self

Returns

Whether all bits in the slice domain are unset.

Examples

use bitvec::prelude::*;

let bits = 0x40u8.bits::<BigEndian>();
assert!(!bits[.. 4].not_any());
assert!(bits[4 ..].not_any());

pub fn some(&self) -> bool

Tests whether the slice has some, but not all, bits set and some, but not all, bits unset.

This is false if either all() or not_any() are true.

Truth Table

0 0 => 0
0 1 => 1
1 0 => 1
1 1 => 0

Parameters

• &self

Returns

Whether the slice domain has mixed content. The empty slice returns false.

Examples

use bitvec::prelude::*;

let bits = 0b111_000_10u8.bits::<BigEndian>();
assert!(!bits[0 .. 3].some());
assert!(!bits[3 .. 6].some());
assert!(bits[6 ..].some());

pub fn count_ones(&self) -> usize

Counts how many bits are set high.

Parameters

• &self

Returns

The number of high bits in the slice domain.

Examples

use bitvec::prelude::*;

let bits = [0xFDu8, 0x25].bits::<BigEndian>();
assert_eq!(bits.count_ones(), 10);

pub fn count_zeros(&self) -> usize

Counts how many bits are set low.

Parameters

• &self

Returns

The number of low bits in the slice domain.

Examples

use bitvec::prelude::*;

let bits = [0xFDu8, 0x25].bits::<BigEndian>();
assert_eq!(bits.count_zeros(), 6);

pub fn set_all(&mut self, value: bool)

Set all bits in the slice to a value.

Parameters

• &mut self
• value: The bit value to which all bits in the slice will be set.

Examples

use bitvec::prelude::*;

let mut src = 0u8;
let bits = src.bits_mut::<BigEndian>();
bits[2 .. 6].set_all(true);
assert_eq!(bits.as_ref(), &[0b0011_1100]);
bits[3 .. 5].set_all(false);
assert_eq!(bits.as_ref(), &[0b0010_0100]);
bits[.. 1].set_all(true);
assert_eq!(bits.as_ref(), &[0b1010_0100]);

pub fn for_each<F>(&mut self, func: F) where
    F: Fn(usize, bool) -> bool, 

Provides mutable traversal of the collection.

It is impossible to implement IndexMut on BitSlice, because bits do not have addresses, so there can be no &mut u1. This method allows the client to receive an enumerated bit, and provide a new bit to set at each index.

Parameters

• &mut self
• func: A function which receives a (usize, bool) pair of index and value, and returns a bool. It receives the bit at each position, and the return value is written back at that position.

Examples

use bitvec::prelude::*;

let mut src = 0u8;
{
 let bits = src.bits_mut::<BigEndian>();
 bits.for_each(|idx, _bit| idx % 3 == 0);
}
assert_eq!(src, 0b1001_0010);

pub fn add_assign_reverse<I>(&mut self, addend: I) -> bool where
    I: IntoIterator<Item = bool>, 

Performs “reverse” addition (left to right instead of right to left).

This addition interprets the slice, and the other addend, as having its least significant bits first in the order and its most significant bits last. This is most likely to be numerically useful under a LittleEndian Cursor type.

Parameters

• &mut self: The addition uses self as one addend, and writes the sum back into self.
• addend: impl IntoIterator<Item=bool>: A stream of bits. When this is another BitSlice, iteration proceeds from left to right.

Return

The final carry bit is returned

Effects

Starting from index 0 and proceeding upwards until either self or addend expires, the carry-propagated addition of self[i] and addend[i] is written to self[i].

  101111
+ 0010__ (the two missing bits are logically zero)
--------
  100000 1 (the carry-out is returned)

Examples

use bitvec::prelude::*;

let mut a = 0b0000_1010u8;
let     b = 0b0000_1100u8;
//      s =      1 0110
let ab = &mut a.bits_mut::<LittleEndian>()[.. 4];
let bb = &    b.bits::<LittleEndian>()[.. 4];
let c = ab.add_assign_reverse(bb.iter().copied());
assert!(c);
assert_eq!(a, 0b0000_0110u8);

Performance Notes

When using LittleEndian Cursor types, this can be accelerated by delegating the addition to the underlying types. This is a software implementation of the ripple-carry adder, which has O(n) runtime in the number of bits. The CPU is much faster, as it has access to element-wise or vectorized addition operations.

If your use case sincerely needs binary-integer arithmetic operations on bit sets

pub fn as_slice(&self) -> &[T]

Accesses the backing storage of the BitSlice as a slice of its elements.

This will not include partially-owned edge elements, as they may be contended by other slice handles.

Parameters

• &self

Returns

A slice of all the elements that the BitSlice uses for storage.

Examples

use bitvec::prelude::*;

let src = [1u8, 66];
let bits = src.bits::<BigEndian>();

let accum = bits.as_slice()
  .iter()
  .map(|elt| elt.count_ones())
  .sum::<u32>();
assert_eq!(accum, 3);

pub fn as_mut_slice(&mut self) -> &mut [T]

Accesses the underlying store.

This will not include partially-owned edge elements, as they may be contended by other slice handles.

Examples

use bitvec::prelude::*;

let mut src = [1u8, 64];
let bits = src.bits_mut::<BigEndian>();
for elt in bits.as_mut_slice() {
  *elt |= 2;
}
assert_eq!(&[3, 66], bits.as_slice());

pub fn as_total_slice(&self) -> &[T::Access]

Accesses the underlying store, including contended partial elements.

This produces a slice of element wrappers that permit shared mutation, rather than a slice of the bare T fundamentals.

Parameters

• &self

Returns

A slice of all elements under the bit span, including any partially-owned edge elements, wrapped in safe shared-mutation types.

Trait Implementations

impl<C, T> Send for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

BitBox is safe to move across thread boundaries, as is &mut BitBox.

impl<C, T> Sync for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

&BitBox is safe to move across thread boundaries.

impl<C, T> Drop for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn drop(&mut self)

Executes the destructor for this type.

impl<C, T> AsMut<BitSlice<C, T>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn as_mut(&mut self) -> &mut BitSlice<C, T>

Performs the conversion.

impl<C, T> AsMut<[T]> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn as_mut(&mut self) -> &mut [T]

Performs the conversion.

impl<C, T> AsRef<BitSlice<C, T>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn as_ref(&self) -> &BitSlice<C, T>

Performs the conversion.

impl<C, T> AsRef<[T]> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn as_ref(&self) -> &[T]

Performs the conversion.

impl<'_, C, T> From<&'_ BitSlice<C, T>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn from(src: &BitSlice<C, T>) -> Self

Performs the conversion.

impl<'_, C, T> From<&'_ [T]> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn from(src: &[T]) -> Self

Performs the conversion.

impl<C, T> From<BitVec<C, T>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn from(src: BitVec<C, T>) -> Self

Performs the conversion.

impl<C, T> From<Box<[T]>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn from(src: Box<[T]>) -> Self

Performs the conversion.

impl<C, T> From<BitBox<C, T>> for BitVec<C, T> where
    C: Cursor,
    T: BitStore, 

fn from(src: BitBox<C, T>) -> Self

Performs the conversion.

impl<C, T> Into<Box<[T]>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn into(self) -> Box<[T]>

Performs the conversion.

impl<C, T> IntoIterator for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

type Item = bool

The type of the elements being iterated over.

type IntoIter = IntoIter<C, T>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl<'a, C, T> IntoIterator for &'a BitBox<C, T> where
    C: Cursor,
    T: 'a + BitStore, 

type Item = &'a bool

The type of the elements being iterated over.

type IntoIter = <&'a BitSlice<C, T> as IntoIterator>::IntoIter

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl<C, T> Clone for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<C, T> Default for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn default() -> Self

Returns the "default value" for a type.

impl<C, T> Eq for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

impl<C, T> Ord for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn cmp(&self, rhs: &Self) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

🔬 This is a nightly-only experimental API. (clamp)

Restrict a value to a certain interval.

impl<A, B, C, D> PartialEq<BitBox<C, D>> for BitBox<A, B> where
    A: Cursor,
    B: BitStore,
    C: Cursor,
    D: BitStore, 

fn eq(&self, rhs: &BitBox<C, D>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<A, B, C, D> PartialEq<BitSlice<C, D>> for BitBox<A, B> where
    A: Cursor,
    B: BitStore,
    C: Cursor,
    D: BitStore, 

fn eq(&self, rhs: &BitSlice<C, D>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<A, B, C, D> PartialEq<BitBox<C, D>> for BitSlice<A, B> where
    A: Cursor,
    B: BitStore,
    C: Cursor,
    D: BitStore, 

fn eq(&self, rhs: &BitBox<C, D>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<A, B, C, D> PartialOrd<BitBox<C, D>> for BitBox<A, B> where
    A: Cursor,
    B: BitStore,
    C: Cursor,
    D: BitStore, 

fn partial_cmp(&self, rhs: &BitBox<C, D>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<A, B, C, D> PartialOrd<BitSlice<C, D>> for BitBox<A, B> where
    A: Cursor,
    B: BitStore,
    C: Cursor,
    D: BitStore, 

fn partial_cmp(&self, rhs: &BitSlice<C, D>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<A, B, C, D> PartialOrd<BitBox<C, D>> for BitSlice<A, B> where
    A: Cursor,
    B: BitStore,
    C: Cursor,
    D: BitStore, 

fn partial_cmp(&self, rhs: &BitBox<C, D>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<C, T> Deref for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

type Target = BitSlice<C, T>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl<C, T> DerefMut for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl<C, T> Debug for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn fmt(&self, fmt: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<C, T> Display for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn fmt(&self, fmt: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<C, T> Add<BitBox<C, T>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

type Output = Self

The resulting type after applying the + operator.

fn add(self, addend: Self) -> Self::Output

Performs the + operation.

impl<C, T> Neg for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

type Output = Self

The resulting type after applying the - operator.

fn neg(self) -> Self::Output

Performs the unary - operation.

impl<C, T> AddAssign<BitBox<C, T>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn add_assign(&mut self, addend: Self)

Performs the += operation.

impl<C, T> Not for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

type Output = Self

The resulting type after applying the ! operator.

fn not(self) -> Self::Output

Performs the unary ! operation.

impl<C, T, I> BitAnd<I> for BitBox<C, T> where
    C: Cursor,
    T: BitStore,
    I: IntoIterator<Item = bool>, 

type Output = Self

The resulting type after applying the & operator.

fn bitand(self, rhs: I) -> Self::Output

Performs the & operation.

impl<C, T, I> BitOr<I> for BitBox<C, T> where
    C: Cursor,
    T: BitStore,
    I: IntoIterator<Item = bool>, 

type Output = Self

The resulting type after applying the | operator.

fn bitor(self, rhs: I) -> Self::Output

Performs the | operation.

impl<C, T, I> BitXor<I> for BitBox<C, T> where
    C: Cursor,
    T: BitStore,
    I: IntoIterator<Item = bool>, 

type Output = Self

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: I) -> Self::Output

Performs the ^ operation.

impl<C, T> Shl<usize> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

type Output = Self

The resulting type after applying the << operator.

fn shl(self, shamt: usize) -> Self::Output

Performs the << operation.

impl<C, T> Shr<usize> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

type Output = Self

The resulting type after applying the >> operator.

fn shr(self, shamt: usize) -> Self::Output

Performs the >> operation.

impl<C, T, I> BitAndAssign<I> for BitBox<C, T> where
    C: Cursor,
    T: BitStore,
    I: IntoIterator<Item = bool>, 

fn bitand_assign(&mut self, rhs: I)

Performs the &= operation.

impl<C, T, I> BitOrAssign<I> for BitBox<C, T> where
    C: Cursor,
    T: BitStore,
    I: IntoIterator<Item = bool>, 

fn bitor_assign(&mut self, rhs: I)

Performs the |= operation.

impl<C, T, I> BitXorAssign<I> for BitBox<C, T> where
    C: Cursor,
    T: BitStore,
    I: IntoIterator<Item = bool>, 

fn bitxor_assign(&mut self, rhs: I)

Performs the ^= operation.

impl<C, T> ShlAssign<usize> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn shl_assign(&mut self, shamt: usize)

Performs the <<= operation.

impl<C, T> ShrAssign<usize> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn shr_assign(&mut self, shamt: usize)

Performs the >>= operation.

impl<C, T> Index<usize> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

type Output = bool

The returned type after indexing.

fn index(&self, index: usize) -> &Self::Output

Performs the indexing (container[index]) operation.

impl<C, T> Index<Range<usize>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

type Output = BitSlice<C, T>

The returned type after indexing.

fn index(&self, range: Range<usize>) -> &Self::Output

Performs the indexing (container[index]) operation.

impl<C, T> Index<RangeFrom<usize>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

type Output = BitSlice<C, T>

The returned type after indexing.

fn index(&self, range: RangeFrom<usize>) -> &Self::Output

Performs the indexing (container[index]) operation.

impl<C, T> Index<RangeFull> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

type Output = BitSlice<C, T>

The returned type after indexing.

fn index(&self, _: RangeFull) -> &Self::Output

Performs the indexing (container[index]) operation.

impl<C, T> Index<RangeInclusive<usize>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

type Output = BitSlice<C, T>

The returned type after indexing.

fn index(&self, range: RangeInclusive<usize>) -> &Self::Output

Performs the indexing (container[index]) operation.

impl<C, T> Index<RangeTo<usize>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

type Output = BitSlice<C, T>

The returned type after indexing.

fn index(&self, range: RangeTo<usize>) -> &Self::Output

Performs the indexing (container[index]) operation.

impl<C, T> Index<RangeToInclusive<usize>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

type Output = BitSlice<C, T>

The returned type after indexing.

fn index(&self, range: RangeToInclusive<usize>) -> &Self::Output

Performs the indexing (container[index]) operation.

impl<C, T> IndexMut<Range<usize>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn index_mut(&mut self, range: Range<usize>) -> &mut Self::Output

Performs the mutable indexing (container[index]) operation.

impl<C, T> IndexMut<RangeFrom<usize>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn index_mut(&mut self, range: RangeFrom<usize>) -> &mut Self::Output

Performs the mutable indexing (container[index]) operation.

impl<C, T> IndexMut<RangeFull> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn index_mut(&mut self, _: RangeFull) -> &mut Self::Output

Performs the mutable indexing (container[index]) operation.

impl<C, T> IndexMut<RangeInclusive<usize>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn index_mut(&mut self, range: RangeInclusive<usize>) -> &mut Self::Output

Performs the mutable indexing (container[index]) operation.

impl<C, T> IndexMut<RangeTo<usize>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn index_mut(&mut self, range: RangeTo<usize>) -> &mut Self::Output

Performs the mutable indexing (container[index]) operation.

impl<C, T> IndexMut<RangeToInclusive<usize>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn index_mut(&mut self, range: RangeToInclusive<usize>) -> &mut Self::Output

Performs the mutable indexing (container[index]) operation.

impl<C, T> Hash for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn hash<H: Hasher>(&self, hasher: &mut H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl<C, T> Octal for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn fmt(&self, fmt: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<C, T> Binary for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn fmt(&self, fmt: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<C, T> LowerHex for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn fmt(&self, fmt: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<C, T> UpperHex for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn fmt(&self, fmt: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<C, T> Borrow<BitSlice<C, T>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn borrow(&self) -> &BitSlice<C, T>

Immutably borrows from an owned value.

impl<C, T> BorrowMut<BitSlice<C, T>> for BitBox<C, T> where
    C: Cursor,
    T: BitStore, 

fn borrow_mut(&mut self) -> &mut BitSlice<C, T>

Mutably borrows from an owned value.

impl<C, T> Serialize for BitBox<C, T> where
    C: Cursor,
    T: BitStore + Serialize,
    T::Access: Serialize, 

fn serialize<S>(&self, serializer: S) -> Result<S::Ok, S::Error> where
    S: Serializer, 

Serialize this value into the given Serde serializer.

impl<'de, C, T> Deserialize<'de> for BitBox<C, T> where
    C: Cursor,
    T: 'de + BitStore + Deserialize<'de>, 

fn deserialize<D>(deserializer: D) -> Result<Self, D::Error> where
    D: Deserializer<'de>, 

Deserialize this value from the given Serde deserializer.