Struct bevy_render::render_phase::TrackedRenderPass

pub struct TrackedRenderPass<'a> { /* private fields */ }

A RenderPass, which tracks the current pipeline state to skip redundant operations.

It is used to set the current RenderPipeline, BindGroups and Buffers. After all requirements are specified, draw calls can be issued.

Implementations

impl<'a> TrackedRenderPass<'a>

pub fn new(device: &RenderDevice, pass: RenderPass<'a>) -> Self

Tracks the supplied render pass.

pub fn set_render_pipeline(&mut self, pipeline: &'a RenderPipeline)

Sets the active RenderPipeline.

Subsequent draw calls will exhibit the behavior defined by the pipeline.

pub fn set_bind_group( &mut self, index: usize, bind_group: &'a BindGroup, dynamic_uniform_indices: &[u32] )

Sets the active bind group for a given bind group index. The bind group layout in the active pipeline when any draw() function is called must match the layout of this bind group.

If the bind group have dynamic offsets, provide them in binding order. These offsets have to be aligned to WgpuLimits::min_uniform_buffer_offset_alignment or WgpuLimits::min_storage_buffer_offset_alignment appropriately.

pub fn set_vertex_buffer( &mut self, slot_index: usize, buffer_slice: BufferSlice<'a> )

Assign a vertex buffer to a slot.

Subsequent calls to draw and draw_indexed on this RenderPass will use buffer as one of the source vertex buffers.

The slot_index refers to the index of the matching descriptor in VertexState::buffers.

pub fn set_index_buffer( &mut self, buffer_slice: BufferSlice<'a>, offset: u64, index_format: IndexFormat )

Sets the active index buffer.

Subsequent calls to TrackedRenderPass::draw_indexed will use the buffer referenced by buffer_slice as the source index buffer.

pub fn draw(&mut self, vertices: Range<u32>, instances: Range<u32>)

Draws primitives from the active vertex buffer(s).

The active vertex buffer(s) can be set with TrackedRenderPass::set_vertex_buffer.

pub fn draw_indexed( &mut self, indices: Range<u32>, base_vertex: i32, instances: Range<u32> )

Draws indexed primitives using the active index buffer and the active vertex buffer(s).

The active index buffer can be set with TrackedRenderPass::set_index_buffer, while the active vertex buffer(s) can be set with TrackedRenderPass::set_vertex_buffer.

pub fn draw_indirect( &mut self, indirect_buffer: &'a Buffer, indirect_offset: u64 )

Draws primitives from the active vertex buffer(s) based on the contents of the indirect_buffer.

The active vertex buffers can be set with TrackedRenderPass::set_vertex_buffer.

The structure expected in indirect_buffer is the following:

#[repr(C)]
struct DrawIndirect {
    vertex_count: u32, // The number of vertices to draw.
    instance_count: u32, // The number of instances to draw.
    first_vertex: u32, // The Index of the first vertex to draw.
    first_instance: u32, // The instance ID of the first instance to draw.
    // has to be 0, unless [`Features::INDIRECT_FIRST_INSTANCE`] is enabled.
}

pub fn draw_indexed_indirect( &mut self, indirect_buffer: &'a Buffer, indirect_offset: u64 )

Draws indexed primitives using the active index buffer and the active vertex buffers, based on the contents of the indirect_buffer.

The active index buffer can be set with TrackedRenderPass::set_index_buffer, while the active vertex buffers can be set with TrackedRenderPass::set_vertex_buffer.

The structure expected in indirect_buffer is the following:

#[repr(C)]
struct DrawIndexedIndirect {
    vertex_count: u32, // The number of vertices to draw.
    instance_count: u32, // The number of instances to draw.
    first_index: u32, // The base index within the index buffer.
    vertex_offset: i32, // The value added to the vertex index before indexing into the vertex buffer.
    first_instance: u32, // The instance ID of the first instance to draw.
    // has to be 0, unless [`Features::INDIRECT_FIRST_INSTANCE`] is enabled.
}

pub fn multi_draw_indirect( &mut self, indirect_buffer: &'a Buffer, indirect_offset: u64, count: u32 )

Dispatches multiple draw calls from the active vertex buffer(s) based on the contents of the indirect_buffer.count draw calls are issued.

The active vertex buffers can be set with TrackedRenderPass::set_vertex_buffer.

indirect_buffer should contain count tightly packed elements of the following structure:

#[repr(C)]
struct DrawIndirect {
    vertex_count: u32, // The number of vertices to draw.
    instance_count: u32, // The number of instances to draw.
    first_vertex: u32, // The Index of the first vertex to draw.
    first_instance: u32, // The instance ID of the first instance to draw.
    // has to be 0, unless [`Features::INDIRECT_FIRST_INSTANCE`] is enabled.
}

pub fn multi_draw_indirect_count( &mut self, indirect_buffer: &'a Buffer, indirect_offset: u64, count_buffer: &'a Buffer, count_offset: u64, max_count: u32 )

Dispatches multiple draw calls from the active vertex buffer(s) based on the contents of the indirect_buffer. The count buffer is read to determine how many draws to issue.

The indirect buffer must be long enough to account for max_count draws, however only count elements will be read, where count is the value read from count_buffer capped at max_count.

The active vertex buffers can be set with TrackedRenderPass::set_vertex_buffer.

indirect_buffer should contain count tightly packed elements of the following structure:

#[repr(C)]
struct DrawIndirect {
    vertex_count: u32, // The number of vertices to draw.
    instance_count: u32, // The number of instances to draw.
    first_vertex: u32, // The Index of the first vertex to draw.
    first_instance: u32, // The instance ID of the first instance to draw.
    // has to be 0, unless [`Features::INDIRECT_FIRST_INSTANCE`] is enabled.
}

pub fn multi_draw_indexed_indirect( &mut self, indirect_buffer: &'a Buffer, indirect_offset: u64, count: u32 )

Dispatches multiple draw calls from the active index buffer and the active vertex buffers, based on the contents of the indirect_buffer. count draw calls are issued.

The active index buffer can be set with TrackedRenderPass::set_index_buffer, while the active vertex buffers can be set with TrackedRenderPass::set_vertex_buffer.

indirect_buffer should contain count tightly packed elements of the following structure:

#[repr(C)]
struct DrawIndexedIndirect {
    vertex_count: u32, // The number of vertices to draw.
    instance_count: u32, // The number of instances to draw.
    first_index: u32, // The base index within the index buffer.
    vertex_offset: i32, // The value added to the vertex index before indexing into the vertex buffer.
    first_instance: u32, // The instance ID of the first instance to draw.
    // has to be 0, unless [`Features::INDIRECT_FIRST_INSTANCE`] is enabled.
}

pub fn multi_draw_indexed_indirect_count( &mut self, indirect_buffer: &'a Buffer, indirect_offset: u64, count_buffer: &'a Buffer, count_offset: u64, max_count: u32 )

Dispatches multiple draw calls from the active index buffer and the active vertex buffers, based on the contents of the indirect_buffer. The count buffer is read to determine how many draws to issue.

The indirect buffer must be long enough to account for max_count draws, however only count elements will be read, where count is the value read from count_buffer capped at max_count.

The active index buffer can be set with TrackedRenderPass::set_index_buffer, while the active vertex buffers can be set with TrackedRenderPass::set_vertex_buffer.

indirect_buffer should contain count tightly packed elements of the following structure:

#[repr(C)]
struct DrawIndexedIndirect {
    vertex_count: u32, // The number of vertices to draw.
    instance_count: u32, // The number of instances to draw.
    first_index: u32, // The base index within the index buffer.
    vertex_offset: i32, // The value added to the vertex index before indexing into the vertex buffer.
    first_instance: u32, // The instance ID of the first instance to draw.
    // has to be 0, unless [`Features::INDIRECT_FIRST_INSTANCE`] is enabled.
}

pub fn set_stencil_reference(&mut self, reference: u32)

Sets the stencil reference.

Subsequent stencil tests will test against this value.

pub fn set_scissor_rect(&mut self, x: u32, y: u32, width: u32, height: u32)

Sets the scissor region.

Subsequent draw calls will discard any fragments that fall outside this region.

pub fn set_push_constants( &mut self, stages: ShaderStages, offset: u32, data: &[u8] )

Set push constant data.

Features::PUSH_CONSTANTS must be enabled on the device in order to call these functions.

pub fn set_viewport( &mut self, x: f32, y: f32, width: f32, height: f32, min_depth: f32, max_depth: f32 )

Set the rendering viewport.

Subsequent draw calls will be projected into that viewport.

pub fn set_camera_viewport(&mut self, viewport: &Viewport)

Set the rendering viewport to the given camera Viewport.

Subsequent draw calls will be projected into that viewport.

pub fn insert_debug_marker(&mut self, label: &str)

Insert a single debug marker.

This is a GPU debugging feature. This has no effect on the rendering itself.

pub fn push_debug_group(&mut self, label: &str)

Start a new debug group.

Push a new debug group over the internal stack. Subsequent render commands and debug markers are grouped into this new group, until pop_debug_group is called.

pass.push_debug_group("Render the car");
// [setup pipeline etc...]
pass.draw(0..64, 0..1);
pass.pop_debug_group();

Note that push_debug_group and pop_debug_group must always be called in pairs.

This is a GPU debugging feature. This has no effect on the rendering itself.

pub fn pop_debug_group(&mut self)

End the current debug group.

Subsequent render commands and debug markers are not grouped anymore in this group, but in the previous one (if any) or the default top-level one if the debug group was the last one on the stack.

Note that push_debug_group and pop_debug_group must always be called in pairs.

This is a GPU debugging feature. This has no effect on the rendering itself.

pub fn set_blend_constant(&mut self, color: Color)

Sets the blend color as used by some of the blending modes.

Subsequent blending tests will test against this value.